loading
ICBO GROUTED BRICK - REINFORCED GROUTED BRICK MASONRY
ICBO
A description is not available for this item.
ASTM C1088-26 - Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
June 1, 2026 - ASTM International

This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. The brick units shall be available in both Grades Interior and Exterior of the following...

ASTM C216-26a - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
June 1, 2026 - ASTM International

This specification covers brick intended for use in masonry and supplying structural or facing components, or both, to the structure. Bricks shall be classified according to their resistance to damage by freezing when saturated at a moisture content: Grade SW and Grade MW. The facing...

ASTM C1935-26 - Standard Practice for Installation Methods for Adhered Veneer Systems Using Thin Brick Units Made from Clay or Shale
June 1, 2026 - ASTM International

1.1 This practice is intended to provide accepted installation procedures for thin brick units in adhered veneer systems in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of clay and shale thin...

ASTM C216-26 - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
February 1, 2026 - ASTM International

This specification covers brick intended for use in masonry and supplying structural or facing components, or both, to the structure. Bricks shall be classified according to their resistance to damage by freezing when saturated at a moisture content: Grade SW and Grade MW. The facing...

ASTM C861-93(2026) - Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
March 1, 2026 - ASTM International

1.1 This practice covers dimensions in millimetres for standard series refractory brick and shapes of all compositions. 1.2 A standard method for converting all other dimensions of shaped refractory articles from inch-pound to SI units is included. 1.3 The values stated in SI units are to be...

ASTM C140/C140M-26a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1262/C1262M-26 - Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
June 1, 2026 - ASTM International

1.1 This test method covers the resistance to freezing and thawing of dry-cast segmental retaining wall (SRW) units (see Specification C1372) and related concrete units. Units are tested in a test solution that is either potable tap water or 3 % saline solution depending on the intended use of the...

ASTM C1713-26 - Standard Specification for Mortars for the Repair of Historic Masonry
June 1, 2026 - ASTM International

1.1 This specification covers mortar for the repair of masonry that was constructed with methods and materials that pre-date the origination of current standards of construction that are compatible with it. The mortar may be used for non-structural purposes such as repointing of the masonry, or for...

ASTM C1283-15(2026) - Standard Practice for Installing Clay Flue Lining
May 1, 2026 - ASTM International

This practice covers the minimum requirements for installing clay flue lining for residential concrete or masonry chimneys. Footings shall be constructed of concrete or solid masonry and the foundation shall be placed with respect to adjacent structures to minimize the possibility of damage. Both...

ASTM C55-25 - Standard Specification for Dry-Cast Concrete Building Brick
July 1, 2025 - ASTM International

This specification covers solid, dry-cast, concrete building brick intended for interior and exterior use in constructing structural masonry, and are made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Materials to be used in...

ASTM D7072-04(2026) - Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
February 1, 2026 - ASTM International

1.1 This practice covers the evaluation of the degree to which a latex paint resists the formation of efflorescence and alkali burnout on the exposed paint surface. 1.2 This practice is designed primarily to relate efflorescence originating in the substrate to the deposit appearing on the surface...

ASTM C113-14(2025) - Standard Test Method for Reheat Change of Refractory Brick
August 1, 2025 - ASTM International

3.1 Refractory brick and shapes of different compositions exhibit unique permanent linear changes after heating or reheating. This test method provides a standard procedure for heating various classes of refractories with appropriate heating schedules. 3.2 Linear reheat changes obtained by...

ASTM C140/C140M-26 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
January 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C577-25 - Standard Test Method for Permeability of Refractories
November 1, 2025 - ASTM International

1.1 This test method covers determination of the permeability of refractory brick and monoliths, from which suitable specimens can be cut, at room temperature. 1.2 Units-The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical...

ASTM C1634-25 - Standard Specification for Dry-Cast Concrete Facing Brick and Other Concrete Masonry Facing Units
July 1, 2025 - ASTM International

This specification covers solid, dry-cast, concrete facing brick intended for interior and exterior use in constructing structural and facing masonry components and are made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials....

ASTM C67/C67M-25 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
August 1, 2025 - ASTM International

These test methods cover procedures for the sampling and testing of brick and structural clay tile. The tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate or absorption, and determination of...

ASTM F3706-25 - Standard Practice for In Field Spray Applied Cementitious Mortar Linings for Large Diameter Stormwater and Sewer Conduits
November 15, 2025 - ASTM International

1.1 This practice covers the procedures to structurally or non-structurally reconstruct, seal, and protect existing large diameter conduits with spray application mortar linings in the field. Applications include applying prepackaged cementitious or geopolymer liner materials that may function as a...

ASTM D6661-25 - Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
October 1, 2025 - ASTM International

1.1 This practice addresses sampling of organic compounds (that is, PCBs, dioxins, many pesticides, and similar compounds) from smooth nonporous surfaces using a solvent-wetted wipe sampling method. Samples are collected in a manner that permits the solvent extraction of the organic compound(s) of...

Advertisement