This Specification applies to all works and activities to be carried out on those services located on Network Rail owned infrastructure and Managed Stations where there may be a risk of damage to, or danger from, Surface or Buried Services. These works and activities include actions carried out...
1.1 This specification2 establishes the requirements for copper conductor bar, rod, and shapes for electrical (bus) applications and rod, bar, and shapes for general applications. 1.1.1 The products for electrical (bus) applications shall be made from the following coppers:3 Copper...
5.1 This test method can be used to test asphalt mixtures in conjunction with mixture design testing to determine the potential for fuel spill damage. This assessment is particularly important for airfield pavements that are subject to fuel spills where fuel damage could lead to surface degradation...
5.1 A major factor affecting the life of insulating materials is thermal degradation. It is possible that other factors, such as moisture and vibration, will cause failures after the material has been weakened by thermal degradation. 5.2 Electrical insulation is effective in electrical equipment...
5.1 PFAS are widely used in various industrial and commercial products; they are persistent, bio-accumulative, and ubiquitous in the environment. PFAS have been reported to exhibit developmental toxicity, hepatotoxicity, immunotoxicity, and hormone disturbance. PFAS have been detected in soils,...
1.1 This guide identifies the key factors that should be considered prior to the deployment of blast resistant trash receptacles (BRTRs) in crowded places. 1.1.1 Guidance is included for their deployment at interior and exterior locations associated with the crowded places. 1.2 Facilities and...
1.1 This practice describes the procedure to create statistical prediction profilers which can be used to identify equivalent test severity conditions between a 1.707-m diameter laboratory roadwheel surface and a flat or highway surface for commercial radial truck-bus tires. 1.1.1 Tire...
5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of robotic system mobility and remote operator proficiency. This gravel terrain specifically challenges robotic system locomotion, suspension systems to maintain traction, rollover tendencies,...
1.1 These test methods cover three electrical tests on plastic guards and assembled guard systems. They are: 1.1.1 Method A-Withstand voltage proof test, 1.1.2 Method B-Flashover voltage, and 1.1.3 Method C-Leakage current. 1.1.4 This specification covers plastic guard equipment and guard systems...
5.1 This test method is part of an overall suite of related test methods that provide repeatable measures of robotic system mobility and remote operator proficiency. This sand terrain specifically challenges robotic system locomotion, suspension systems to maintain traction, rollover tendencies,...
5.1 PFAS are widely used in various industrial and commercial products; they are persistent, bio-accumulative, and ubiquitous in the environment. PFAS have been reported to exhibit developmental toxicity, hepatotoxicity, immunotoxicity, and hormone disturbance. PFAS have been detected in soils,...
Narrow Your Results