Introduction A camera crane is safe if used properly. However, improper use, assembly, and disassembly can cause property damage, serious bodily injury and even death. This handbook of safe practices, procedures and conditions coupled with common sense, good judgment, and proper evaluation...
This document specifies a method for measuring the spectral transmittance of camera lenses. It describes particular conditions for measuring the axial spectral transmittance, over a wavelength range from 350 nm to 700 nm, of camera lenses which are intended to be used...
1.1 The purpose of this test method is to specify the apparatuses, procedures, and performance metrics necessary to quantitatively measure a robot's visual acuity as displayed to a remote operator or vision algorithm. The primary performance metric for this test method shall be a robot's possession...
1.1 Intent: 1.1.1 This guide establishes the minimum requirements for viewing systems for remotely operated facilities, including hot cells (shielded cells), used for the processing and handling of nuclear and radioactive materials. The intent of this guide is to aid in the design, selection,...
5.1 This practice provides procedures for the determination of the retroreflective performance of pavement markings. This practice does not set the minimum retroreflectance values for pavement markings; it describes sampling criteria for determining the retroreflective properties of pavement...
This standard specifies the dimensions required for mechanical and optical interchangeability of lenses for 16-mm and 8-mm motion-picture cameras. For 16-mm cameras with threaded lens mounts, threads having a nominal major diameter of 1 in are often specified. Similarly,...
Thin-film coatings are universal on optical components such as displays, lenses, mirrors, cameras, and windows and serve a variety of functions such as antireflection, high reflection, and spectral filtering. Designs can be as simple as a single-layer dielectric for antireflection...
This intent of this standard is to quantify the performance of camera-equipped mobile devices. There is an emphasis on metrics and procedures appropriate to the types of sensors, lenses, and signal processing routines present on such devices. It is not intended as a general image...
Narrow Your Results