loading
ASTM CARBON - ASTM STANDARDS ON ACTIVATED CARBON 2ND EDITION
ASTM
A description is not available for this item.
IEEE TESTING OBJECT - TESTING OBJECT-ORIENTED SOFTWARE
IEEE
A description is not available for this item.
SPI FIBERGLASS PANELS - FIBERGLASS REINFORCED PANELS, REC INSTALL PRACTICE
SPI
A description is not available for this item.
AWWA FIBERGLASS SET - AWWA FIBERGLASS SET
AWWA
A description is not available for this item.
ASTM C1557-20(2026) - Standard Test Method for Tensile Strength and Young's Modulus of Fibers
June 1, 2026 - ASTM International

5.1 Properties determined by this test method are useful in the evaluation of new fibers at the research and development levels. Fibers with diameters up to 250 × 10-6 m are covered by this test method. Very short fibers (including whiskers) call for specialized...

ASTM E1118/E1118M-26 - Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
May 1, 2026 - ASTM International

5.1 The AE examination method detects damage in RTRP. The damage mechanisms detected in RTRP are as follows: resin cracking, fiber debonding, fiber pullout, fiber breakage, delamination, and bond or thread failure in assembled joints. Flaws in unstressed areas and flaws which...

ASTM B987/B987M-25 - Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
September 1, 2025 - ASTM International

1.1 This specification covers carbon fiber reinforced thermoset matrix composite core strength members for use in reinforcing or supporting overhead electrical conductors. 1.2 This specification covers carbon fiber core diameters from 0.180?in. to 0.835 in. [4.57?mm to...

ASTM D3531/D3531M-24 - Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
May 1, 2024 - ASTM International

1.1 This test method covers the determination of the amount of resin flow that will take place from carbon fiber-epoxy prepreg material (fabric, tape or sheet) under given conditions of temperature and pressure. 1.2 The values stated in either SI units or inch-pound units are...

ASTM D8186-25 - Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP-OES)
August 15, 2025 - ASTM International

1.1 This test method covers the measurement of mass fractions of the elements silver (Ag), aluminum (Al), arsenic (As), boron (B), barium (Ba), berylium (Be), bismuth (Bi), calcium (Ca), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), potassium (K), lithium (Li), magnesium...

ASTM E2582-21(2025) - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
September 1, 2025 - ASTM International

5.1 Typically, FT is used to identify flaws that occur in the manufacture of composite structures, or to identify and track flaws that develop during the service lifetime of the structure. Flaws detected with FT include delamination, disbonds, voids, inclusions, foreign object debris, porosity, or...

ASTM D6100-25 - Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
September 1, 2025 - ASTM International

1.1 This specification covers requirements and test methods for the material, dimensions, and workmanship, and the properties of extruded, compression molded and injection molded polyoxymethylene (POM) sheet, plate, rod, and tubular bar shapes, excluding pipe and fittings. 1.2 The properties...

ASTM D1997-25 - Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
April 15, 2025 - ASTM International

5.1 This test method is useful for determining the quantity of fibers in a peat or organic soil specimen. Fiber content is one parameter used to classify the peat as determined in Classification D4427. It is also a significant parameter in predicting or defining the many end...

ASTM C471M-25 - Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
April 1, 2025 - ASTM International

1.1 These test methods cover the chemical analysis of gypsum and gypsum panel products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster, and gypsum concrete. 1.2 These test methods appear in the following order: Sections Preparation of Sample 4 Complete...

ASTM D4018-23 - Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
September 1, 2023 - ASTM International

1.1 These test methods cover the preparation and tensile testing of resin-impregnated and consolidated test specimens made from continuous filament carbon and graphite yarns, rovings, and tows to determine their tensile properties. 1.2 These test methods also...

ASTM B161-25 - Standard Specification for Nickel Seamless Pipe and Tube
April 1, 2025 - ASTM International

This specification covers the standard requirements for nickel (UNS N02200) and low-carbon nickel (UNS N02201) in the form of cold-worked seamless pipe and tube. The material shall conform to the specified chemical composition limits for nickel, copper, iron, manganese, carbon,...

ASTM C1863-18(2025) - Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
January 1, 2025 - ASTM International

5.1 This test method (also known as "tube burst test") may be used for material development, material comparison, material screening, material down selection, and quality assurance. This test method can also be used for material characterization, design data generation,...

ASTM D4102/D4102M-22 - Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
May 1, 2022 - ASTM International

5.1 The test is used to determine the oxidative resistances of carbon fibers as a means of selecting the most stable fibers for incorporation in high-temperature fiber-reinforced composite systems. It can be used for quality control, material specification, and...

ASTM C1783-15(2024) - Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
January 1, 2024 - ASTM International

1.1 This document is a guide to preparing material specifications for fiber reinforced carbon-carbon (C-C) composite structures (flat plates, rectangular bars, round rods, and tubes) manufactured specifically for structural components in nuclear reactor core applications. The...

Advertisement