loading
ASME CODE CASES-1971 - ASME BPVC CASE INTERPRETATIONS
ASME
A description is not available for this item.
ASME CODE CASES BPVC-1968 - CODE CASES BOILERS AND PRESSURE VESSELS
ASME
A description is not available for this item.
ASME CODE CASES BPVC-1965 - CODE CASES BOILERS AND PRESSURE VESSELS
ASME
A description is not available for this item.
ASME CODE CASES BPVC-1952 - CODE CASES BOILERS AND PRESSURE VESSELS
ASME
A description is not available for this item.
ASTM F2199-26 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
August 1, 2026 - ASTM International

4.1 The final appearance of an installed floor depends upon several factors. These include but are not limited to size and squareness in the case of tiles/planks, the quality of joint cut, the quality and preparation of the subfloor and the skill of the installer. Long term appearance of the...

ASTM A234/A234M-26 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
July 1, 2026 - ASTM International

This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The material for fittings shall consist of killed steel,...

ASTM A788/A788M-26a - Standard Specification for Steel Forgings, General Requirements
August 1, 2026 - ASTM International

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM C146-26 - Standard Test Methods for Chemical Analysis of Glass Sand
July 1, 2026 - ASTM International

3.1 These test methods can be used to ensure that the chemical composition of the glass sand meets the compositional specification required for this raw material. 3.2 These test methods do not preclude the use of other methods that yield results within permissible variations. In any case,...

ASTM E3301-26 - Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
July 1, 2026 - ASTM International

5.1 Dynamic mechanical analysis monitors changes in the viscoelastic properties (that is, storage modulus, loss modulus, tangent angle delta) of a material as a function of temperature and frequency, providing a means to quantify these changes. In many cases, the value to be assigned is the...

ASTM F3120/F3120M-26a - Standard Specification for Ice Protection for General Aviation Aircraft
July 1, 2026 - ASTM International

1.1 This specification covers international standards for ice protection aspects of airworthiness and design for "general aviation" aircraft. 1.2 The applicant for a design approval must seek the individual guidance of their respective civil aviation authority (CAA) body concerning the use of this...

ASTM D5930-26 - Standard Test Method for Thermal Conductivity of Plastics by Transient Line-Source Technique
July 1, 2026 - ASTM International

5.1 The relative simplicity of the test method makes it applicable for a wide range of materials (4, 5). The technique is capable of fast measurements, making it possible to take data before the materials suffer thermal degradation. Alternatively, it is possible to study the effect of compositional...

ASTM F1731-21(2026) - Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
July 1, 2026 - ASTM International

5.1 Sizing is a critical factor that must be considered when selecting and using protective clothing. Properly sized garments add to the safety and performance of wearer by not restricting movement. A work uniform that restricts movement or exposes skin to hazardous environments will result in lost...

ASTM D1238-26 - Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
July 15, 2026 - ASTM International

5.1 This test method is particularly useful for quality control tests on thermoplastics. 5.2 The data produced by this test method serves to indicate the uniformity of the flow rate of the polymer as made by an individual process. It is not to be used as an indication of uniformity of other...

ASTM D5114/D5114M-90(2026) - Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
July 15, 2026 - ASTM International

1.1 This test method covers a laboratory procedure for conducting a single froth flotation test on fine coal (that is, nominal top size of 600 μm (No. 30 U.S.A. Standard Sieve Series) or finer) using a defined set of starting point conditions for the operating variables. 1.2 This test method does...

ASTM C1274-12(2026) - Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
July 15, 2026 - ASTM International

1.1 This test method covers the determination of the surface area of advanced ceramic materials (in a solid form) based on multilayer physisorption of gas in accordance with the method of Brunauer, Emmett, and Teller (BET) (1) and based on IUPAC Recommendations (1984 and 1994) (2, 3). This test...

ASTM F1671/F1671M-26 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
July 1, 2026 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...

Advertisement