loading
ASTM C1277-26 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
July 15, 2026 - ASTM International

1.1 This specification covers the materials and testing of shielded hubless couplings to join hubless cast iron soil pipe and fittings. 1.2 Several different types of hubless couplings are available for use in hubless cast iron sanitary and storm drain, waste, and vent...

ASTM A74-26 - Standard Specification for Cast Iron Soil Pipe and Fittings
April 1, 2026 - ASTM International

This specification covers cast gray iron soil pipe and fittings for use in gravity flow plumbing, drain, waste and vent sanitary, and storm water applications. These pipe and fittings are not intended for pressure applications. The cast iron shall be produced by an...

ASTM A74-25 - Standard Specification for Cast Iron Soil Pipe and Fittings
August 15, 2025 - ASTM International

This specification covers cast gray iron soil pipe and fittings for use in gravity flow plumbing, drain, waste and vent sanitary, and storm water applications. These pipe and fittings are not intended for pressure applications. The cast iron shall be produced by an...

ASTM C1540-26 - Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
July 15, 2026 - ASTM International

1.1 This specification covers the evaluation of the performance of heavy-duty shielded couplings to join hubless cast iron soil pipe and fittings. 1.2 Couplings covered by this standard shall have nominal dimensions as found in Table 1 and Fig. 1. 1.3 The values stated in inch-pound...

GMW10 - Nodular Cast Iron
February 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. This material specification covers castings made of nodular iron, also known as spheroidal or...

ASTM C564-26 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
February 1, 2026 - ASTM International

This specification covers preformed rubber gaskets used to seal joints in cast iron soil pipe and fittings. Gaskets shall be made of a properly vulcanized virgin rubber as the sole elastomer with no scrap or reclaim. Gaskets shall conform to the required physical properties such as...

AMS7310L - Rings, Piston, Cast Iron As Cast
September 21, 2020 - SAE International

This specification covers piston rings fabricated from cast iron.

GMW16394 - Brake Rotors - Gray Cast Iron
September 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. Gray cast iron. Symbols. Not applicable. Applicability. This...

ASTM A1111-25 - Standard Specification for Cast Iron Closet Flanges for Use with Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
May 1, 2025 - ASTM International

1.1 This specification covers cast iron soil closet flanges for use in gravity flow plumbing drain, waste, and vent sanitary applications. It establishes standards covering material, manufacture, mechanical and chemical properties, coating, test methods, inspection, certification,...

GMW17904 - Cast Iron Flywheel Porosity
January 1, 2018 - GMW

Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. This specification describes cast iron flywheel porosity inspection...

ASME B16.12 - Cast Iron Threaded Drainage Fittings
November 18, 2019 - ASME

This Standard for cast iron threaded drainage fittings covers (a) sizes and method of designating openings in reducing fittings (b) marking (c) material (d) dimensions and tolerances (e) threading (f) ribs (g) coatings (h) face bevel

GMW16845 - Chilled Cast Iron Camshafts
June 1, 2017 - GMW

Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. This specification defines the requirements and test conditions for finish machined...

GMW13 - High Temperature Resistant Cast Iron
October 1, 2020 - GMW

This material specification covers castings made of high temperature resistant iron as used in automotive and allied industries, including the mechanical properties from separately cast Y-block test samples and compositional requirements in the product castings. Any specific...

ASTM E351-25 - Standard Test Methods for Chemical Analysis of Cast Iron—All Types
May 15, 2025 - ASTM International

1.1 These test methods cover the chemical analysis of pig iron, gray cast iron (including alloy and austenitic), white cast iron, malleable cast iron, and ductile (nodular) iron having chemical compositions within the following limits: Element...

GMW4 - Gray Cast Iron
February 1, 2017 - GMW

This material specification applies to those grades of gray iron castings intended for a wide range of automotive applications. This standard describes the material properties, not specific casting properties, based on data obtained from separately cast test samples. Any specific...

JIS F 7425 - Shipbuilding -- Cast iron valves
January 20, 2021 - JSA
A description is not available for this item.
ASTM A1056 - Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
May 1, 2020 - ASTM

This specification covers the materials and testing of cast iron couplings for joining hubless cast iron soil pipe and fittings for sizes 1½ to 10 in. It is the purpose of this specification to furnish information as to the characteristics of a particular sleeve type...

ASTM A1056-20 - Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
May 1, 2020 - ASTM International

1.1 This specification covers the materials and testing of cast iron couplings for joining hubless cast iron soil pipe and fittings for sizes 11/2 to 10 in. 1.2 It is the purpose of this specification to furnish information as to the characteristics of a particular...

ASTM E1999-23 - Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
June 1, 2023 - ASTM International

1.1 This test method covers the analysis of cast iron by spark atomic emission spectrometry for the following elements in the ranges shown (Note 1): Ranges, % Elements Applicable Range, % Quantitative Range, %A Carbon 1.9 to 3.8 1.90? to 3.8 Chromium 0 to 2.0 0.025 to 2.0 Copper 0 to...

Advertisement