5.1 This test method provides a means of measuring the time and extent of burning for cellular polymeric materials. It also provides a means of measuring burning rates for materials that continue to burn past the specified gage marks. 5.2 This test method provides a means of comparing the...
4.1 This practice provides minimum recommendations for the installation of thick poured lightweight cellular concrete floor underlayments suitable to receive resilient floor coverings. This practice establishes the proper preparation, installation and quality control for thick poured...
1.1 This test method covers the density of a cellular plastic. Density can be evaluated as the apparent overall density (includes forming skins) or by apparent core density (forming skins removed). 1.2 The values stated in SI units are to be regarded as standard. The values given in...
5.1 This test method is intended for use when measuring surface flammability of flexible cellular materials exposed to fire. The test method provides a laboratory test procedure for measuring and comparing the surface flammability of materials when exposed to a prescribed level of radiant...
1.1 This guide outlines the parameters to consider when designing in vitro tests to assess the potential impact of a delivery device on a cellular product being dispensed. This guide does not provide specific protocols, but rather suggests what should be considered the minimum...
This specification covers toluene diisocyanate used as an ingredient in the production of polyurethane cellular materials. The three classes of toluene diisocyanate covered in this specification are based on isomer ratio, and the three types are based on acidity and hydrolyzable chloride....
This specification covers preformed open-cell sponge rubber gaskets, for use in new or reconditioned pails or drums, of the following classes: Class A and Class B, each divided into Grade 1, Grade 2, and Grade 3. Cellular sponge rubber gaskets shall be made by incorporating a blowing agent...
This specification covers sheet and tubular preformed flexible elastomeric cellular thermal insulation. The materials are classified into three grades according to the operating temperature range of the industrial systems that each material is used for. The non-thermoplastic, thermoset...
3.1 The frequency of use of ECM products has gradually increased in the 21st century, as has the range of available products and applications as well as the opportunity for variable patient outcomes across these factors. Patient outcomes may be affected by multiple attributes, both related to a...
1.1 This practice provides considerations for the in vitro assessment of cellular responses to wear particles and degradation products from medical device materials with direct or indirect contact with tissues that may lead to a cascade of biological responses resulting in damage to adjacent...
This specification addresses the physical, chemical and test requirements for structural insulated panel (SIP) adhesives suitable for the bonding of oriented strand boards (OSB) to rigid cellular polystyrene thermal insulation core materials for general structural use. Douglas-fir to...
1.1 These test methods apply to slab, bonded, and molded flexible cellular products known as polyurethane foams. Polyurethane foam is generally defined as an expanded cellular product produced by the interaction of active hydrogen compounds, water, and isocyanates. 1.2 The values...
4.1 This test method covers the determination of the air-permeability coefficient, kT, of hardened concrete, and is applicable to laboratory testing of specimens or to in-place testing of concrete elements. 4.2 The air-permeability coefficient, kT, is closely related to the structure (volume, size,...
This specification covers the standard for two grades of extruded preformed flexible cellular polyolefin thermal insulation. Physical properties of preformed flexible cellular polyofelin thermal insulation which are mandatory for thermal design are also covered. Properties such as...
1.1 This guide outlines the parameters to consider when designing in vitro tests to assess the potential impact of a delivery device on a cellular product being dispensed. This guide does not provide specific protocols, but rather suggests what should be considered the minimum...
1.1 This test method covers the determination of the total water content of a sample of a fresh cementitious mixture by determining the change in mass of the sample from before and after rapid evaporation in a furnace. 1.2 Using information about the batch quantities and aggregate absorption...
Narrow Your Results