loading
ASTM B276-21(2026) - Standard Test Method for Apparent Porosity in Cemented Carbides
July 1, 2026 - ASTM International

4.1 Cemented carbide materials may contain small voids that, depending on the application, may affect the performance of the product. To assist users in specifying the maximum acceptable level of porosity, this test method illustrates a broad range of porosity levels for each of three...

ASTM B406-96(2025) - Standard Test Method for Transverse Rupture Strength of Cemented Carbides
September 1, 2025 - ASTM International

3.1 This test method is used as a means of determining the quality of cemented carbide grade powders by measuring their sintered strength. It is performed on test specimens prepared to specified shape, dimensions, and surface finish; test specimens may be prepared from finished parts...

ASTM B657-23 - Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
September 1, 2023 - ASTM International

4.1 The microstructure of a cemented carbide affects the material's mechanical and physical properties. This guide is not intended to be used as a specification for carbide grades. Producers and users may use the microstructural information as a guide in developing their own...

ASTM B771-11(2025) - Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
September 1, 2025 - ASTM International

5.1 The property KIcSR determined by this test method is believed to characterize the resistance of a cemented carbide to fracture in a neutral environment in the presence of a sharp crack under severe tensile constraint, such that the state of stress near the crack front approaches...

ASTM B887-25 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
February 1, 2025 - ASTM International

1.1 This test method covers the determination of magnetization coercivity (Hcs) of cemented carbide materials and products using coercive force instrumentation. It is patterned after ISO 3326. 1.2 The values stated in SI units are to be regarded as standard. An exception is the use of...

ASTM B294-22 - Standard Test Method for Hardness Testing of Cemented Carbides
March 1, 2022 - ASTM International

3.1 Rockwell hardness testing is one of the more important methods used to evaluate cemented carbides. For compositional groups of cemented carbides, hardness is an indication of wear resistance and toughness. Lower hardness grades usually indicate less wear resistance...

ASTM B276-21 - Standard Test Method for Apparent Porosity in Cemented Carbides
September 1, 2021 - ASTM International

4.1 Cemented carbide materials may contain small voids that, depending on the application, may affect the performance of the product. To assist users in specifying the maximum acceptable level of porosity, this test method illustrates a broad range of porosity levels for each of three...

ASTM B887-24 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
February 1, 2024 - ASTM International

5.1 Measurement of coercivity provides a relative comparison of carbide grain size, binder content, and possibly carbon deficiency for a given graded carbide material or product, and may be employed as a non-destructive measurement indicating deviation from a specified norm. 5.2 This...

ASTM B886-24 - Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
February 1, 2024 - ASTM International

1.1 This test method covers the determination of magnetic saturation (Ms) of cemented carbide powder materials and sintered products using magnetic saturation induction test instrumentation. 1.2 The values stated in SI units are to be regarded as standard. An exception is the use of...

ASTM B406-96(2021) - Standard Test Method for Transverse Rupture Strength of Cemented Carbides
April 1, 2021 - ASTM International

3.1 This test method is used as a means of determining the quality of cemented carbide grade powders by measuring their sintered strength. It is performed on test specimens prepared to specified shape, dimensions, and surface finish; test specimens may be prepared from finished parts...

ASTM B665-24 - Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
October 1, 2024 - ASTM International

1.1 This guide prescribes a method for preparing cemented carbides for metallographic examination. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate...

ASTM B930-03(2026) - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
July 1, 2026 - ASTM International

5.1 The microstructure and grain growth of cemented tungsten carbides affect the material's mechanical and physical properties. The grain size and distribution will affect the material's wear resistance and fracture toughness. Abnormally large grains as compared to the background may...

ASTM B294-17 - Standard Test Method for Hardness Testing of Cemented Carbides
November 1, 2017 - ASTM International

3.1 Rockwell hardness testing is one of the more important methods used to evaluate cemented carbides. For compositional groups of cemented carbides, hardness is an indication of wear resistance and toughness. Lower hardness grades usually indicate less wear resistance...

ASTM B657-18 - Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
April 1, 2018 - ASTM International

4.1 The microstructure of a cemented carbide affects the material's mechanical and physical properties. This guide is not intended to be used as a specification for carbide grades. Producers and users may use the microstructural information as a guide in developing their own...

JIS B 4054 - Recommendation of cemented carbide for wear resistant tools
November 20, 2020 - JSA
A description is not available for this item.
ASTM B771-11(2021) - Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
September 1, 2021 - ASTM International

5.1 The property KIcSR determined by this test method is believed to characterize the resistance of a cemented carbide to fracture in a neutral environment in the presence of a sharp crack under severe tensile constraint, such that the state of stress near the crack front approaches...

ASTM B657 - Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
April 1, 2018 - ASTM

This guide covers apparatus and procedures for the metallographic identification of microstructures in cemented carbides. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to...

ASTM B294 - Standard Test Method for Hardness Testing of Cemented Carbides
November 1, 2017 - ASTM

This test method covers the hardness testing of cemented carbides by use of a Rockwell hardness tester performing tests in the Rockwell HRA scale (regular scale, diamond indenter, 10 kgf (98.07 N) preliminary test force, and 60 kgf (588.4 N) total test force in the range of Rockwell...

ASTM B276-05(2015) - Standard Test Method for Apparent Porosity in Cemented Carbides
October 1, 2015 - ASTM International

4.1 Cemented carbide materials may contain small voids that, depending on the application, may affect the performance of the product. To assist users in specifying the maximum acceptable level of porosity, this test method illustrates a broad range of porosity levels for each of three...

ASTM B406-96(2015) - Standard Test Method for Transverse Rupture Strength of Cemented Carbides
October 1, 2015 - ASTM International

3.1 This test method is used as a means of determining the quality of cemented carbide grade powders by measuring their sintered strength. It is performed on test specimens prepared to specified shape, dimensions, and surface finish; test specimens may be prepared from finished parts...

Advertisement