loading
MPIF CERAMIC INJECTION - CERAMIC INJECTION MOLDING
MPIF
A description is not available for this item.
CTI CERAMIC INDEX - CERAMIC TILE INSTITUTE OF AMERICA
CTI/TILE
A description is not available for this item.
ASTM C1274-12(2026) - Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
July 15, 2026 - ASTM International

5.1 Advanced ceramic powders and porous ceramic bodies often have a very fine particulate morphology and structure that are marked by high surface-to-volume (S-V) ratios. These ceramics with high S-V ratios commonly exhibit enhanced chemical reactivity and lower sintering temperatures...

ASTM C1470-20(2026) - Standard Guide for Testing the Thermal Properties of Advanced Ceramics
June 1, 2026 - ASTM International

1.1 This guide covers the thermal property testing of advanced ceramics, to include monolithic ceramics, particulate/ whisker-reinforced ceramics, and continuous fiber-reinforced ceramic composites. It is intended to provide guidance and information to users on the special considerations...

ASTM C539-84(2026) - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
May 1, 2026 - ASTM International

1.1 This test method covers the interferometric determination of linear thermal expansion of premelted frits (porcelain enamel and glaze) and fired ceramic whiteware materials at temperatures lower than 1000?°C (1830?°F). 1.2 This standard does not purport to address all of the safety...

ASTM C1954-26 - Standard Specification for Decorative Enamels on Flat Glass
July 1, 2026 - ASTM International

1.1 This specification covers the aesthetic quality requirements for decorative enamels applied to flat glass for use in building glazing. 1.2 This specification covers the requirements for flat glass, with either organic or ceramic enamels applied. 1.2.1 Glass may be annealed,...

ASTM C1557-20(2026) - Standard Test Method for Tensile Strength and Young's Modulus of Fibers
June 1, 2026 - ASTM International

1.1 This test method covers the preparation, mounting, and testing of single fibers (obtained either from a fiber bundle or a spool) for the determination of tensile strength and Young's modulus at ambient temperature. Advanced ceramic, glass, carbon, and other fibers are covered by this...

ASTM C1368-18(2026) - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
June 1, 2026 - ASTM International

4.1 For many structural ceramic components in service, their use is often limited by lifetimes that are controlled by a process of SCG. This test method provides the empirical parameters for appraising the relative SCG susceptibility of ceramic materials under specified environments....

ASTM C1465-26 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
June 1, 2026 - ASTM International

4.1 For many structural ceramic components in service, their use is often limited by lifetimes that are controlled by a process of slow crack growth. This test method provides the empirical parameters for appraising the relative slow crack growth susceptibility of ceramic materials...

ASTM C346-26 - Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
March 1, 2026 - ASTM International

4.1 This test method may be used to compare the gloss of porcelain enamel, ceramic, and other finishes or to provide a comparison of their resistance to attack from acid, alkali, or other environmental factors by measurement of gloss loss.

ASTM C1425-19(2026) - Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
June 1, 2026 - ASTM International

5.1 Continuous fiber-reinforced ceramic composites are candidate materials for structural applications requiring high degrees of wear, erosion, corrosion resistance, and damage tolerance at high temperatures. 5.2 The 1D and 2D CFCCs are highly anisotropic and their transthickness tensile and...

ASTM C1895-26 - Standard Test Method for Determination of Mohs Scratch Hardness
June 1, 2026 - ASTM International

1.1 This test method covers the procedures to determine the Mohs scratch hardness of ceramic tile, glass tile, and other hard surfaces. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are...

ASTM C1468-19a(2026) - Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
June 1, 2026 - ASTM International

4.1 This test method may be used for material development, material comparison, quality assurance, characterization, and design data generation. 4.2 Continuous fiber-reinforced ceramic matrix composites generally are characterized by glass or fine grain-sized (<50?μm) ceramic matrices...

ASTM C724-91(2026) - Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
March 1, 2026 - ASTM International

4.1 This test method evaluates the quality and serviceability of a ceramic decoration on architectural type glass. The degree of attack is determined using an acidic solution both quantitatively and qualitatively. 4.2 This test method provides a convenient control test during the manufacture...

ASTM C1678-21(2026) - Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
June 1, 2026 - ASTM International

5.1 Fracture mirror size analysis is a powerful tool for analyzing glass and ceramic fractures. Fracture mirrors are tell-tale fractographic markings in brittle materials that surround a fracture origin as discussed in Practices C1256 and C1322. Fig. 1 shows a schematic with key features...

ASTM C1198-20(2026) - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
June 1, 2026 - ASTM International

5.1 This test method may be used for material development, characterization, design data generation, and quality control purposes. It is specifically appropriate for determining the modulus of advanced ceramics that are elastic, homogeneous, and isotropic. 5.1.1 This test method is nondestructive...

ASTM F2024-10(2026) - Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
May 1, 2026 - ASTM International

3.1 Calcium phosphate coatings have been shown in animal and clinical studies to be biocompatible and to enhance the early attachment of bone to implant surfaces (see Refs. (1-5)). 3.2 It is believed that the form of calcium phosphate ceramic and its purity with respect to secondary...

ASTM C216-26a - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
June 1, 2026 - ASTM International

1.1 This specification covers brick intended for use in masonry supplying structural or facing components, or both, to the structure. 1.2 The requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining...

ASTM C844-26 - Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
May 1, 2026 - ASTM International

1.1 This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters. 1.2 Gypsum veneer base shall not be used as a base for direct adhesive application of ceramic, metal, or plastic tile in areas exposed to abnormal...

Advertisement