loading
DRIVERS APPLICATION GB - DRIVERS APPLICATION GUIDEBOOK: ELECTRIC MOTORS
January 1, 2019 - HI/HYDRAUL
A description is not available for this item.
JIS B 1810 - Guidelines for the selection of roller chain drives
October 22, 2018 - JSA

This Standard gives guidelines for the selection of chain drives, composed of a roller chainlbush chain (hereafter referred to as a chain), and sprockets conforming with JIS B 1801. An example of the chain and sprocket drive selection is shown in Annex A,...

ASME B29.22 - Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs
January 1, 2001 - ASME

The drop forged rivetless chain has widespread use in many industries on trolleys, scraper flights, assembly, and similar conveyors. Because materials do not tend to pack in its open structure, the drop forged rivetless chain is used extensively for flight conveyors. Its design...

ASME B29.22M - Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs
January 1, 1995 - ASME

Drop Forged Rivetless Chain has widespread use in many industries on trolley, scraper flights, assembly and similar conveyors. Because materials do not tend to pack in its open structure, Drop Forged Rivetless Chain is used extensively for flight conveyors. Its design permits both...

ASTM D8655-26 - Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
April 15, 2026 - ASTM International

4.1 While end-use product performance and durability remain critical for functionality, the focus on recycling rigid PVC products or components at their end of life needs to be intensified. Participants in the value chain (for example, material scientists, product designers, procurement, and...

DIN 8195 - Design and selection of chain drives
August 1, 1977 - DIN
A description is not available for this item.
ASTM F2277-17a(2025) - Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
February 1, 2025 - ASTM International

1.1 These test methods specify procedures and apparatus used for testing and evaluating selectorized strength equipment for compliance to Specification F2216. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies...

ASTM F3151-17(2025) - Standard Specification for Driven Steel Post Drive Anchor System
January 1, 2025 - ASTM International

This specification establishes the material requirements and installation procedures for driven steel post drive anchor systems. It provides an alternative to the use of concrete footings for the purpose of installing steel post frameworks to support chain link, expanded metal, welded...

ASTM F3218-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Robotic, Automatic, or Autonomous System Test Methods
September 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM E3424-25 - Standard Guide for Development and Validation Considerations of Advanced Process Control (APC) in Commercial Pharmaceutical Manufacturing
May 1, 2025 - ASTM International

5.1 APC is the foundation to smart manufacturing. Smart manufacturing has emerged as one key concept as the industry transitions to an Industry 4.0 paradigm. FDA has also recognized this industry trend and published a perspective paper on Industry 4.0 in the International Journal of Pharmaceutics...

AMCA 99-2407 - MOTOR POSITIONS FOR BELT OF CHAIN DRIVE CENTRIFUGAL FANS
AMCA
A description is not available for this item.
BS ISO 10823 - Guidance on the Selection of Roller Chain Drives
June 15, 1996 - BSI
A description is not available for this item.
ISO 10823 - GUIDELINES FOR THE SELECTION OF ROLLER CHAIN DRIVES
ISO
A description is not available for this item.
DIN ISO 10823 - GUIDELINES FOR THE SELECTION OF ROLLER CHAIN DRIVES
DIN
A description is not available for this item.
Supercharg3d: How 3D Printing Will Drive Your Supply Chain
March 15, 2019 - WILEY

A strategic and operational guide to using 3D printing to drive value in the supply chain-featuring case studies and illustrated examples from across industries After many years as a tool for designers, 3D printing today promises to revolutionize supply chains. Cut through the...

ASTM F1414-19(2023) - Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing
November 1, 2023 - ASTM International

1.1 This test method measures cut resistance of garments and devices worn to protect the lower body (legs) when operating a chainsaw. 1.2 This test method may be used to test for compliance to minimum performance requirements in established safety standards. 1.2.1 By agreement between the purchaser...

ASTM F3324-19(2023) - Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg Protective Devices
November 1, 2023 - ASTM International

5.1 The purpose of this test method is to provide a measurable criterion of performance about the level of cut resistance provided by different types of protective garments and protective coverings worn by chainsaw operators. 5.2 This test method is intended to show to what level a protective...

ASTM F2276-23 - Standard Specification for Fitness Equipment
August 1, 2023 - ASTM International

This specification establishes parameters for the design and manufacture of fitness equipment intended for use by individuals age 12 and above. The design and construction requirements for the following are specified: (1) stability, (2) support, (3) edges, corners, and tube ends, and (4) moving...

ASTM F1458-15(2022) - Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices
December 1, 2022 - ASTM International

5.1 The purpose of this test method is to provide a measurable criterion of performance defining the level of cut resistance to the cutting action of a saw chain provided by foot protective devices. 5.2 The protection which can be demonstrated by the foot protective devices tested in...

Advertisement