loading
ASTM F3787-26 - Standard Terminology for Supply Chain Locations
January 1, 2026 - ASTM International

1.1 Throughout the supply chain and the goods movement process, stakeholders and their systems need to know where things happen, their location. There are at least two levels at which the location question "where?" may be responded to: 1.1.1 Referring to the location by a commonly understood...

ASTM D3307-21(2026) - Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
July 1, 2026 - ASTM International

This specification covers melt processable molding and extrusion materials of PFA-perfluoro(alkoxy alkane) fluorocarbon resin. The materials are copolymers of TFE-fluorocarbon resins containing perfluoroalkoxy side chains. This specification is intended to provide a means for calling out...

ASTM F1897-25 - Standard Specification for Leg Protection for Chain Saw Users
December 1, 2025 - ASTM International

1.1 This specification specifies minimum requirements for the design, performance, testing, and certification of protective clothing and protective devices designed to provide cut resistance protection to the legs of operators of power chain saws. 1.2 The objective of this specification is...

ASTM F2193-26 - Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
May 1, 2026 - ASTM International

1.1 These specifications and test methods are intended to provide a comprehensive reference for the components of systems used in the surgical fixation of the spinal skeletal system. The document catalogs standard specifications that specify material, labeling, and handling requirements. The...

ASTM D6800-18(2026) - Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
May 1, 2026 - ASTM International

1.1 Toxic elements may be present in ambient waters and may enter the food chain via uptake by plants and animals; the actual concentrations of toxic metals are usually sub-ng/mL. The U.S. EPA has published its Water Quality Standards in the U.S. Federal Register 40 CFR?131.36, Minimum...

ASTM D1417-16(2026) - Standard Test Methods for Rubber Latices—Synthetic
April 1, 2026 - ASTM International

This standard covers the test methods for synthetic rubber lattices ABR, BR, CR, IIR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber lattices with substituted carboxylic acid groups on the polymer chain, and reinforced synthetic rubber lattices. Covered tests include the procedure...

ASTM D1646-19a(2026) - Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
April 1, 2026 - ASTM International

5.1 Viscosity-Viscosity values determined by this test method depend on molecular structure, molecular weight, and non-rubber constituents that may be present. Since rubber behaves as a non-Newtonian fluid, no simple relationship exists between the molecular weight and the viscosity. Therefore,...

ASTM D8655-26 - Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
April 15, 2026 - ASTM International

4.1 While end-use product performance and durability remain critical for functionality, the focus on recycling rigid PVC products or components at their end of life needs to be intensified. Participants in the value chain (for example, material scientists, product designers, procurement, and...

ASTM F3776-25 - Standard Terminology Relating to Supply Chain Stakeholders
September 15, 2025 - ASTM International

3.1 In this terminology, terms and definitions are described that help answer the "who" question that is asked throughout most, if not all, supply chain and goods movement process activities. People involved in those activities will use an abundance of terms and definitions associated with...

ASTM F2999-19(2026) - Standard Consumer Safety Specification for Adult Jewelry
April 1, 2026 - ASTM International

1.1 This specification establishes requirements and test methods for specified elements and for certain mechanical hazards in adult jewelry. It does not purport to cover every conceivable hazard of adult jewelry. It does not cover product performance or quality, except as related to safety. This...

ASTM D8558-25 - Standard Guide for Supply Chain Traceability, Authentication, Verification, Validation, and Oversight Using Emerging Technologies Including Blockchain
November 1, 2025 - ASTM International

1.1 Data Sharing Security Measures-This standard presents an opportunity to share more thorough, reliable upstream data, in a way that also preserves and protects companies' intellectual property and upstream documents. The use of a technology platform, underpinned by a distributed ledger, that is,...

ASTM D8628-25 - Standard Test Method for Analytical Procedure for the Analysis of Ultrashort Chain Perfluoroalkyl Substances (PFAS) in Aqueous Samples by Liquid Chromatography/Mass Spectrometry (LC-MS/MS)
December 1, 2025 - ASTM International

1.1 This test method covers the analysis of ultrashort chain perfluoroalkyl substances (PFAS) listed in Table 2, in aqueous samples. Ultrashort chain PFAS are defined as PFAS with a carbon chain length of three or fewer. After spiking with isotopically labeled extracted...

ASTM F765-25 - Standard Specification for Wildcats, Ship Anchor Chain
July 1, 2025 - ASTM International

1.1 This specification covers wildcats as used in windlasses to haul in and pay out anchor chain on board ships. An associated chain stopper is used to secure the chain while the ship is anchored, or the anchor is housed. 1.2 Wildcats are of the five whelp type for use with...

ASTM F668-25 - Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
November 15, 2025 - ASTM International

1.1 This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Polyvinyl chloride, polyolefin, and other organic polymer coating hereinafter will be designated as polymer coating. 1.2 Fabric produced from three...

ASTM E824-26 - Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
March 1, 2026 - ASTM International

5.1 The methods described represent the preferable means for calibration of field radiometers employing standard reference radiometers. Other methods involve the employment of an optical bench and essentially a point source of artificial light. While these methods are useful for cosine and azimuth...

ASTM D6956-17(2026) - Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
January 1, 2026 - ASTM International

4.1 This guide is intended for use by both generators and users of analytical results. It is intended to promote consistent demonstration and documentation of the quality of the measurement results and facilitate determination of the validity of measurements for their intended use. 4.2 This guide...

ASTM F2725-19(2025) - Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
July 1, 2025 - ASTM International

1.1 This guide will assist companies that manufacture, buy, or sell, or both, substances, preparations, and articles to ensure that supply chains comply with the European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) regulation. This is accomplished by identifying...

ASTM E3511-26 - Standard Guide for Per- and Polyfluoroalkyl Substances (PFAS) Sampling of Environmental Media
January 1, 2026 - ASTM International

1.1 In this guide, practitioners are informed on the considerations relevant to the environmental field sampling component of data acquisition programs for per- and polyfluoroalkyl substances (PFAS). 1.2 In this guide, the collection of environmental media, including potable water (such as drinking...

ASTM F3804-26 - Standard Practice for Applying a Goods Movement Process Code as Suffix to the ISO Transport Unit Identifier
January 1, 2026 - ASTM International

1.1 The global supply chain involves 5 distinct phases; the first and last are not included in the Goods Movement Process (as defined in Terminology F3682; see also Fig. 1). 1.1.1 The Goods Movement Process' three phases are the Planning Phase, the Execution Phase, and the Reconciliation...

Advertisement