loading
ASTM C1198-20(2026) - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
June 1, 2026 - ASTM International

1.1 This test method covers the determination of the dynamic elastic properties of advanced ceramics. Specimens of these materials possess specific mechanical resonant frequencies that are determined by the elastic modulus, mass, and geometry of the test specimen. Therefore, the dynamic elastic...

ASTM D8623-25 - Standard Practice for Environmental Odor Screening for Single, Character-Defining Odorants; Using Gas Chromatography-Mass Spectrometry Olfactometry (GC-MS-O) Analysis and On-Instrument Odor-Matching Confirmation
October 1, 2025 - ASTM International

5.1 Historically, environmental odor issues have been assumed to be inherently complex with respect to chemical composition. However, environmental odor issues are often driven by relatively small subsets of odorants from otherwise complex source emissions; in extreme cases, driven by single...

ASTM A917-25 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
October 1, 2025 - ASTM International

This specification covers hot-rolled and cold-rolled steel sheet coated by the electrolytic process. Coatings can be comprised of pure metals or metal alloys. The product shall be coated on one or both surfaces with equal or differential coating masses on the two surfaces. The following...

ASTM F3803-26 - Standard Guide for Applying Goods Movement Process Codes in Common Approaches to Transport Management
January 1, 2026 - ASTM International

1.1 The global supply chain involves five distinct phases; the first and last are not included in the goods movement process (as defined in Terminology F3682). See Fig. 1. The goods movement process' three phases are the planning phase, the execution phase, and the reconciliation phase. At the...

ASTM F3804-26 - Standard Practice for Applying a Goods Movement Process Code as Suffix to the ISO Transport Unit Identifier
January 1, 2026 - ASTM International

1.1 The global supply chain involves 5 distinct phases; the first and last are not included in the Goods Movement Process (as defined in Terminology F3682; see also Fig. 1). 1.1.1 The Goods Movement Process' three phases are the Planning Phase, the Execution Phase, and the Reconciliation Phase. At...

ASTM D5057-25 - Standard Practice for Screening Apparent Specific Gravity and Bulk Density of Waste
October 1, 2025 - ASTM International

5.1 This practice is intended for use by those in the waste management industries for the determination of apparent specific gravity and bulk density of waste. 5.2 The apparent specific gravity and bulk density determined by this practice can be used for the conversion of measured volumes to...

ASTM D4066-13(2025) - Standard Classification System for Nylon Injection and Extrusion Materials (PA)
September 1, 2025 - ASTM International

This classification system covers nylon injection and extrusion materials. Nylon materials are classified into groups according to their composition. Groups are further classified into classes and grades. Grades are identified by a single letter that indicates the reinforcement or filler used and...

ASTM D3021-01(2025) - Standard Specification for Phthalocyanine Green Pigments
July 1, 2025 - ASTM International

This specification establishes the properties and requirements for chlorinated and chlorinated-brominated copper phthalocyanine green pigments in dry powder form, for use in paints, printing inks, and related products. The pigments may or may not phthalocyanine blue or other ingredients...

ASTM D769-01(2025) - Standard Specification for Black Synthetic Iron Oxide
July 1, 2025 - ASTM International

This specification details the properties and requirements for the pigment commercially known as black synthetic iron oxide, which is manufactured ferrous-ferric oxide obtained by chemical reaction. It shall be a soft dry finely powdered pigment, free of admixtures of other substances. Specimens...

ASTM D6440-10(2025) - Standard Terminology Relating to Hydrocarbon Resins
July 1, 2025 - ASTM International

1.1 The hydrocarbon resin industry continues to evolve from a source of replacement products for naturally-derived materials to industrial materials that have no naturally-derived counterparts. Along with this changing character of the industry, various manufacturing participants have...

ASTM D768-01(2025) - Standard Specification for Yellow Iron Oxide Hydrated
July 1, 2025 - ASTM International

This specification covers the pigment commercially known as yellow iron oxide, hydrated. The pigment shall be a manufactured yellow iron oxide obtained by chemical reaction and shall be soft, finely powdered, and free of admixtures of other substances. The pigment shall conform to the composition...

ASTM B299/B299M-18(2025) - Standard Specification for Titanium Sponge
February 1, 2025 - ASTM International

This specification covers virgin titanium metal melting stock. This virgin metal is commonly designated as sponge titanium because it is most commonly porous and spongelike in texture, although metal produced electrolytically is granular and is essentially nonporous. Sponge titanium is usually...

ASTM F906-85(2024) - Standard Specification for Letters and Numerals for Ships
November 15, 2024 - ASTM International

1.1 This specification specifies shape, size, spacing, and shading of letters and numerals to be used aboard ship. 1.2 Characters are of Five Types: 1.2.1 Type 1-Plain letters and numerals (16 units). 1.2.2 Type 2-Block letters and numerals (12 units). 1.2.3 Type 3-Type 2 characters...

ASTM C1576-25 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
February 1, 2025 - ASTM International

4.1 The service life of many advanced ceramic components is often limited by the subcritical growth (SCG) of cracks over time. In SCG conditions, small subcritical cracks in the ceramic may grow over time under stress in a defined chemical environment at a given temperature (1-3). When one or more...

ASTM C837-09(2024) - Standard Test Method for Methylene Blue Index of Clay
December 1, 2024 - ASTM International

3.1 Tests run on many clays generally indicate that a straight-line relationship exists between the methylene blue index (MBI) and such fundamental clay properties as cation exchange capacity, dry bond strength, and casting rate. Where the colloidal portion of the clay is kaolinite, there is also a...

ASTM D5946-24 - Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
December 1, 2024 - ASTM International

5.1 The ability of polymer films to retain inks, coatings, adhesives, etc. is primarily dependent on the character of their surfaces and can be improved by one of several surface-treating techniques. The electrical discharge treatment, such as corona treatment, has been found to increase the...

ASTM D2501-24 - Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
October 1, 2024 - ASTM International

5.1 The viscosity-gravity constant (VGC) is a useful function for the approximate characterization of the viscous fractions of petroleum.2 It is relatively insensitive to molecular weight and is related to a fluids composition as expressed in terms of certain structural elements. Values of VGC near...

ASTM D1193-24 - Standard Specification for Reagent Water
November 1, 2024 - ASTM International

1.1 This specification covers the required characteristics of waters deemed suitable for use with the standards under the jurisdiction of ASTM International. 1.2 The alphanumeric characters ascribed to water types and grades are specified in the manual, Form and Style for ASTM Standards.2...

ASTM E1790-04(2024) - Standard Practice for Near Infrared Qualitative Analysis
November 1, 2024 - ASTM International

4.1 NIR spectroscopy is a widely used technique for quantitative analysis, and it is also becoming more widely used for the identification of organic materials, that is, qualitative analysis. In general, however, the concept of qualitative analysis as used in the NIR spectral region differs from...

ASTM C687-24 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
September 1, 2024 - ASTM International

1.1 This practice presents a laboratory guide to determine the thermal resistance of loose-fill building insulations at mean temperatures between?-20 and 55°C (-4 to 131°F). 1.2 This practice applies to a wide variety of loose-fill thermal insulation products including but not limited to fibrous...

Advertisement