The rules of this Code constitute requirements for the design, materials, manufacture, examination, inspection, pressure testing and certification of pumps and valves for use in the nuclear energy system of water cooled commercial nuclear power plants. A nuclear energy system is that part of...
This specification covers the general, physical, chemical, and performance requirements for supplemental coolant additives for use as precharging coolants in the cooling systems of heavy-duty engines. Test solutions shall be standard corrosive water, ethylene or propylene glycol in standard...
1.1 This specification2 covers austenitic ductile iron, Type D-2M, Classes 1 and 2, for compressors, expanders, pumps, valves, and other pressure-containing parts intended primarily for low-temperature service. 1.2 These grades of austenitic ductile iron are characterized by having their...
1.1 This test method covers determination of the compatibility of commercial SCA and commercial ethylene and propylene glycol engine coolant concentrates. This test method focuses on the solubility of specific chemical species formed in the engine coolant. The short duration of the test (24...
The physical and performance requirements in this Standard apply to plastic piping system components as well as nonplastic components of the ground loop heat exchanger including, but not limited to, pipes and fittings used in water-based ground-source heat pump systems. This...
4.1 The process of recirculating MWFs entrains air bubbles which can accumulate, forming foam. 4.2 Optimally, air bubbles burst open quickly after they are created. However, air bubble persistence is affected by MWF chemistry and the mechanisms by which energy is introduced into recirculating MWFs....
Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air-conditioning, and refrigeration systems. Revised and fully updated with new problem sets, Heat...
4.1 The process of recirculating MWFs entrains air bubbles which can accumulate, forming foam. 4.2 Optimally, air bubbles burst open quickly after they are created. However, air bubble persistence is affected by MWF chemistry and the mechanisms by which energy is introduced into recirculating MWFs....
Applicability. This code is a safety code that shall apply to the installation of fuel gas piping systems, appliances, equipment, and related accessories as shown in 1.1.1.1(A) through 1.1.1.1(F). (A)* Coverage of piping systems shall extend from the point of delivery to the appliance connections....
Narrow Your Results