loading
AIHA LABORATORY - AIHA LABORATORY VENTILATION GUIDEBOOK
AIHA
A description is not available for this item.
ANSI CHEMICAL - ANSI CHEMICAL
IHS
A description is not available for this item.
AIHA LABORATORY CHEMICAL - LABORATORY CHEMICAL HYGIENE: AN AIHA PROTOCOL GUIDE
AIHA
A description is not available for this item.
SEMI CHEMICALS/GASES - CHEMICALS/GASES
SEMI
A description is not available for this item.
SEMI CHEMICALS/REAGENTS - CHEMICALS/REAGENTS
SEMI
A description is not available for this item.
CHEMICAL PROTECTIVE CLOTH - CHEMICAL PROTECTIVE CLOTHING
AIHA
A description is not available for this item.
ASTM D5114/D5114M-90(2026) - Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
July 15, 2026 - ASTM International

1.1 This test method covers a laboratory procedure for conducting a single froth flotation test on fine coal (that is, nominal top size of 600 μm (No. 30 U.S.A. Standard Sieve Series) or finer) using a defined set of starting point conditions for the operating variables. 1.2 This test method...

ASTM D5496-15(2026) - Standard Practice for In-Field Immersion Testing of Geosynthetics
June 1, 2026 - ASTM International

4.1 This practice provides an approach and methodology for conducting field immersion testing of geosynthetics used in the construction of liners in reservoirs, ponds, impoundments, or landfills for containing liquids and solids. This practice should be performed in accordance to and in conjunction...

ASTM E1578-18(2026) - Standard Guide for Laboratory Informatics
January 1, 2026 - ASTM International

4.1 Relevance-This guide is intended to educate the intended audience on many aspects of laboratory informatics. Specifically, the guide may: 4.1.1 Help educate new users of laboratory informatics; 4.1.2 Help educate general audiences in laboratories and other organizations...

ASTM E3494-26 - Standard Test Method for Effectiveness of Antifoaming Agents for Agriculture Tank Mix
May 1, 2026 - ASTM International

1.1 This test method describes a method for the evaluation of antifoaming agents used to inhibit or prevent the formation of foam in liquids during mixing at the time of application of agricultural chemicals. This laboratory test method may be used for dilute aqueous solutions...

ASTM D7897-26 - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
July 1, 2026 - ASTM International

5.1 The solar reflectance of a building envelope surface affects surface temperature and near-surface ambient air temperature. Surfaces with low solar reflectance absorb a high fraction of the incoming solar energy. Sunlight absorbed by a roof or by other building envelope surfaces can be conducted...

ASTM D8272-19(2026) - Standard Guide for Development and Optimization of D19 Chemical Analysis Methods Intended for EPA Compliance Reporting
May 1, 2026 - ASTM International

1.1 This guide identifies procedures for use in developing and optimizing new or modified Subcommittees D19.05 and D19.06 test methods intended for regulatory compliance reporting in EPA drinking water and wastewater programs. This guide may also be useful for developing test methods for emerging...

ASTM C311/C311M-26 - Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete
June 15, 2026 - ASTM International

1.1 These test methods cover procedures for sampling and testing coal ash and raw or calcined pozzolans for use in concrete. 1.2 The procedures appear in the following order: Sections Sampling 7 CHEMICAL ANALYSIS Reagents and apparatus 10 Moisture content 11 and 12 Loss on ignition 13 and 14...

ASTM E911-98(2026) - Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
June 1, 2026 - ASTM International

1.1 This specification covers standard dimensional requirements for obtaining, within practical limits, interchangeability in glass stopcocks (Note 1) with polytetrafluoroethylene (PTFE) plugs for ordinary laboratory and industrial applications. It covers dimensional interchangeability only...

ASTM C143/C143M-26b - Standard Test Method for Slump of Concrete
June 1, 2026 - ASTM International

1.1 This test method covers determination of slump of concrete, both in the laboratory and in the field. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore,...

ASTM D8394-21(2026) - Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
July 1, 2026 - ASTM International

1.1 This test method covers the determination of linear density (gravimetric fineness hereafter stated as fineness), maturity, micronaire, and ribbon width of cotton fibers from a loose, chemically untreated sample taken before harvest, during ginning, during mill processing or unraveled...

ASTM E2945-14(2026) - Standard Test Method for Film Permeability Determination Using Static Permeability Cells
May 15, 2026 - ASTM International

5.1 This test method provides a simple approach for determining the transmission properties of film membranes and sheeting over a range of permeability exceeding four orders of magnitude. This test method is described here to measure the permeability of films used in soil fumigation, but it is also...

ASTM E800-26 - Standard Guide for Measurement of Gases Present or Generated During Fires
June 1, 2026 - ASTM International

1.1 Analytical methods for the measurement of carbon monoxide, carbon dioxide, oxygen, nitrogen oxides, sulfur oxides, carbonyl sulfide, hydrogen halides, hydrogen cyanide, aldehydes, and hydrocarbons are described, along with sampling considerations. Many of these gases may be present in any fire...

Advertisement