1.1 This practice identifies test methods used to evaluate the properties of various materials and products used in cleanrooms and for cleanroom construction. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the...
1.1 This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment used. 1.2 This standard does not purport to address all of the safety concerns, if any,...
1.1 This test method covers testing all wipers used in cleanrooms and other controlled environments for characteristics related to particulate cleanliness. 1.2 This test method includes the use of computer-based image analysis and counting hardware and software for the counting of densely...
4.1 This practice describes and defines factors to be taken into consideration when designing and fabricating a cleanroom or controlled area that is used for aerospace operations and fabrication. Following the suggestions herein should provide a facility that is more capable of meeting...
1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from gloves used in cleanrooms where spacecraft are assembled, cleaned, or tested. 1.2 The NVR of interest is that which can be extracted from gloves using a specified solvent that has been...
4.1 Any risks to final drug product purity from particulate matter on the surfaces of single-use bioprocessing equipment (single-use systems (SUS)) depend on if the SUS is implemented upstream or downstream of sterilizing grade filters or in aseptic processes (see "Recommendations for the Testing,...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
4.1 EudraLex GMP Guidelines requires "personnel available with appropriate training and experience in microbiology, sterility assurance, and knowledge of the processes to support the design of the manufacturing activities," therefore, an appropriate subject matter expert should have direct...
4.1 Addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization. Test methods need to be validated in many cases, in order to be able to rely on the results. This has to be done at the organization performing the tests but is also performed in the...
This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers. The function of...
1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from wipers used in assembly, cleaning, or testing of spacecraft, but not from those used for analytical surface sampling of hardware. 1.2 The NVR of interest is that which can be extracted from...
4.1 EudraLex GMP Guidelines requires "personnel available with appropriate training and experience in microbiology, sterility assurance, and knowledge of the processes to support the design of the manufacturing activities," therefore, an appropriate subject matter expert should have direct...
Ancillary operations include: a) Preparation of supplies and materials for entry into the cleanroom b) Modification of the facility c) Installation and repair of equipment Procedures are given for verifying the cleanliness of the equipment, the workstation, and the area, fol-lowing these...
This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers. The function of...
This document specifies the specification for ISO Class 4, ISO Class 5 and ISO Class 6 nitrile cleanroom gloves. It is applicable to cleanroom gloves made of acrylonitrile butadiene material.
1.1 This practice covers the procedures to be followed for the initial cleaning and normal maintenance of cleanrooms and controlled areas. This practice is applicable to aerospace clean areas where both particles and molecular films (NVR) must be controlled. 1.2 Units-The values stated in...
1.1 This guide identifies important factors to consider when selecting a disinfectant for use in a cleanroom or similar controlled environment and recommends test methods suitable for evaluating disinfectants. The proper selection of disinfecting agent combined with qualification testing is...
1.1 This practice is intended to assist in the selection, preparation, exposure, and analysis of witness surfaces for the purpose of characterizing particle deposition rates in cleanrooms and associated controlled environments, particularly for aerospace applications. 1.2 Requirements may be...
Narrow Your Results