loading
ASTM COLOR - ASTM INTERNATIONAL STANDARDS ON COLOR AND APPEARANCE MEASUREMENT
ASTM
A description is not available for this item.
IEEE COLOR BOOKS SET CD - COMPLETE STANDARDS SERIES: VUSPEC
January 1, 2008 - IEEE
A description is not available for this item.
MUNSELL COLOR CHARTS - MUNSELL COLOR CHARTS FOR COLOR CODING
MUNSELL
A description is not available for this item.
IEEE COLOR BOOKS SET - COMPLETE SET OF IEEE COLOR BOOKS
IEEE
A description is not available for this item.
ASTM COLOR96 - ASTM STANDARDS ON COLOR AND APPEARANCE MEASUREMENT, 5TH EDITION
ASTM
A description is not available for this item.
MUNSELL SOIL COLOR CHARTS - SOIL COLOR CHARTS
BENMEADOWS
A description is not available for this item.
ASTM E1048-88(2026) - Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants
June 1, 2026 - ASTM International

This specification establishes a color-coding system to identify the anticoagulants used in coating pipets or containers not exceeding 1 mL in volume. Its purpose is to ensure that if a color code is used with an anticoagulant, all manufacturers will be encouraged, though not...

ASTM D3157-05(2026) - Standard Test Method for Rubber from Natural Sources—Color
April 1, 2026 - ASTM International

4.1 Color of material rubber is of importance in compounds where product color is determined by the color of the raw rubber.

GLOBAL BINDER 2" COLOR - GLOBAL BINDER 2" TWO COLOR
DATAPACK
A description is not available for this item.
ASTM C129-26 - Standard Specification for Dry-Cast Nonloadbearing Concrete Masonry Units
July 15, 2026 - ASTM International

1.1 This specification covers dry-cast hollow and solid nonloadbearing concrete masonry units machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. These units are intended for use in nonloadbearing partitions, but under certain...

ASTM D7540-26 - Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
June 1, 2026 - ASTM International

5.1 The results obtained with a mechanical muller do not necessarily correlate directly with an industrial situation where different dispersing conditions exist. However, dispersion with a mechanical muller is a quick and inexpensive way to prepare specimens for testing the color and...

GLOBAL BINDER 3" COLOR - GLOBAL BINDER 3" TWO COLOR, #26933 WHS
DATAPACK
A description is not available for this item.
MUNSELL BOOK OF COLOR - MUNSELL BOOK OF COLOR GLOSSY COLLECTION
MUNSELL
A description is not available for this item.
ASTM D5417-21(2026) - Standard Practice for Operation of the Vettermann Drum Tester
July 1, 2026 - ASTM International

1.1 This practice describes the equipment and operation of the Vettermann drum tester for testing pile yarn floor covering to produce changes in appearance and color due to changes in surface structure by mechanical action. 1.2 This practice is only applicable for use in testing unused pile...

ASTM D1786-21(2026) - Standard Specification for Toluene Diisocyanate
July 1, 2026 - ASTM International

This specification covers toluene diisocyanate used as an ingredient in the production of polyurethane cellular materials. The three classes of toluene diisocyanate covered in this specification are based on isomer ratio, and the three types are based on acidity and hydrolyzable chloride. Materials...

ASTM E2470-26 - Standard Specification for Polyester Grade Ethylene Glycol
July 1, 2026 - ASTM International

This specification covers polyester grade ethylene glycol. Sampled specimens shall undergo tests, for which the following chemical and physical requirements should be met: acidity (as acetic acid); aldehydes (acetaldehyde) content; appearance; chloride content; color (Pt-Co scale); glycols...

ASTM D7680-10(2026) - Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
June 1, 2026 - ASTM International

5.1 It is generally recognized that the best method for evaluating printing properties of ink-substrate combinations is by actual printing. this practice provides a convenient method for preparing repeatable laboratory prints at realistic conditions of printing speed, printing pressure and ink film...

ASTM D6686-01(2026) - Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
June 1, 2026 - ASTM International

5.1 Tannins and other chromophoric extractives are naturally occurring materials in wood and wood-based substrates. Tannins are prevalent to a high degree in cedar, redwood, oak, and to a lesser degree in white and yellow pine. Tannins are also present in varying amounts in wood composition...

ASTM D4970/D4970M-22(2026) - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
July 1, 2026 - ASTM International

5.1 Acceptance Testing-This method of testing fabrics resistance to pilling is not recommended for acceptance testing. If it is used for acceptance testing, it should be used with caution because interlaboratory data are not available. In some cases the purchaser or supplier may have to test a...

ASTM D5548-26 - Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
April 1, 2026 - ASTM International

1.1 This guide covers the evaluation of the effect of dyestuff color transfer or color loss from dyed fabrics. It is designed as a laboratory screening test to aid in the formulation of detergent products or the comparison of two or more detergents. 1.2 There is no single assessment...

Advertisement