loading
SSPC PA 2 - Procedure for Determining Conformance to Dry Coating Thickness Requirements
January 26, 2015 - SSPC
A description is not available for this item.
IPC-TR-587 - Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report
June 1, 2020 - IPC

Abstract Conformal coatings are thin layers of polymers applied to the surfaces of electronic assemblies, primarily to protect the electronics from the operational environment. In most manufacturing specifications, conformal coating thickness is defined as the...

SAA AS/NZS 1635.9.1 - THICKNESS
SAI
A description is not available for this item.
IPC-HDBK-830 - Guidelines for Design, Selection and Application of Conformal Coatings
August 1, 2013 - IPC

Conformal coating, for the purpose of this document, is defined as a thin, transparent, polymeric coating that is applied to the surfaces of PCAs to provide protection from the end-use environment. Typical coating thickness ranges from 12.5 μm [0.49 mil] to 200 μm...

DEF STAN 59-47 - Conformal Coatings for Panels, Printed Circuit and Panels, Electronic Circuit
April 26, 1991 - MODUK

This Defence Standard defines the general requirements and provides a system for the control of quality for conformal coatings suitable for application to printed circuit assemblies. The material covered by this Defence Standard is a thin transparent continuous contour coating...

IPC-TM-650 2.6.11.1 - Hydrolytic Stability - Conformal Coating
July 1, 2000 - IPC

This test method is to determine the resistance of the applied conformal coating to reverting to liquid when exposed to high humidity at a specific temperature and time condition for each class. This test method is to evaluate the quality of the coated printed boards under storage...

ASTM D5235-18(2024) - Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
February 1, 2024 - ASTM International

5.1 As a base for calibration adjustment or accuracy verification of dry film coating thickness measuring instruments. 5.2 The dry film thickness of coatings on wood or wood-based products is specified in written product warranties for proper decorative and protective...

MIL-G-4412 - GAGES, THICKNESS
May 23, 1952 - NPFC

This specification covers thickness gages that shall be used for maintenance and inspection purposes. Thickness gages covered by this specification shall be of the following types as specified (see 6.1): Type I - Gage, 26 Leaf, Tapered Type II - Gage, 6 Leaf, Straight Type III - Gage,...

AWCI 114 - Thickness Gauges
AWCI

Thickness Gauges - 121 Measure the thickness of sprayed fire protection materials with this specially designed rule with a needle probe and sliding indicator. It has been approved for use by most code authorities and complies with criteria outlined in AWCI Technical Manual T-12A

ASTM D1814-70(2025) - Standard Test Method for Measuring Thickness of Leather Units
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the thickness of units of all types of leather. It is not suitable for measuring the thickness of test specimens. 1.2 The thickness of leather units may be reported in millimetres, ounces, or irons. Ounces are generally used when...

ASTM D8331/D8331M-25 - Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
April 1, 2025 - ASTM International

1.1 This test method encompasses measuring the film thickness of a coil coated organic coating layer. Operators can use this method in process during the coating application or in a laboratory setting. 1.2 This test method does not specify the expected film...

ARP2654A - Ultrasonic Thickness Testing
July 11, 2023 - SAE International

To provide general instructions for accomplishing ultrasonic thickness measurements. Measurements can be made from one side of a material when access to the opposite side is restricted.

GMW17138 - Determination of Film Thickness
August 1, 2019 - GMW

Purpose. The objective of this standard is to outline a procedure to determine thickness of functional or decorative films.

AMS3137 - RESIN, CONFORMAL COATING, URETHANE
October 1, 1995 - SAE International
A description is not available for this item.
ASTM D5235-18 - Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
January 15, 2018 - ASTM International

5.1 As a base for calibration adjustment or accuracy verification of dry film coating thickness measuring instruments. 5.2 The dry film thickness of coatings on wood or wood-based products is specified in written product warranties for proper decorative and protective...

AMS3137A - RESIN, CONFORMAL, COATING, URETHANE
January 1, 1977 - SAE International

This specification covers a two-component system composed of a urethane resin and a hardener, supplied in kit form.

MIL-C-22627 - COATING, CONFORMAL, RESIN
NPFC
A description is not available for this item.
ASTM D4544-25 - Standard Practice for Estimating Peat Deposit Thickness
June 1, 2025 - ASTM International

5.1 This practice is used to determine the thickness and lateral extent of a peat deposit such that, the volume of the peat deposit can be calculated. When the overlying material is peat and the underlying one is soil or bedrock, the depth of change may be interpreted as the thickness...

Handbook of Conformal Mappings and Applications
March 4, 2019 - CRC

The subject of conformal mappings is a major part of geometric function theory that gained prominence after the publication of the Riemann mapping theorem - for every simply connected domain of the extended complex plane there is a univalent and meromorphic function that maps such a domain...

ASTM D5994/D5994M-26 - Standard Test Method for Measuring the Thickness of Geomembranes
April 1, 2026 - ASTM International

1.1 This test method covers a procedure to measure the thickness of smooth geomembranes and core thickness of textured geomembranes. 1.2 This test method does not provide thickness values for geomembranes under variable normal stresses. 1.3 The values stated in either SI units...

Advertisement