loading
9985770 - Lubricant, Rubber
April 1, 2020 - GMNA

Material Description. This specification describes water based emulsion of a fatty acid ester and ethylene oxide type surfactant. Note: This lubricant is not approved for fuel system assembly. Material Identification. Not applicable. Symbols. Not applicable. Applicability. This material is...

GMKOREA EDS-M-8032 - Lubricant / Solvent
June 1, 2011 - GMKOREA

This standard shall apply to lubricant and solvent for pressing the damping sleeve for assembly of guide. PURPOSE This standard aims at evaluating general requirement of lubricant for guide sleeve.

GMW18245 - Lubricant, Rubber
March 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. This specification describes water-based emulsion of a fatty acid ester and...

GMKOREA EDS-M-8009 - Lubricant-Oil
June 1, 2011 - GMKOREA

This specification specifies the general requirements of lubricant oil used for lubricating of the circulation system of machinery

FORD M99C85-B (E) - LUBRICANT - DRY
June 24, 2009 - FORD

The material defined by this standard is a lubricant containing organic solvents, mineral oil, and molybdenum disulfide.

FORD M99C85-A (E) - LUBRICANT - DRY
June 24, 2009 - FORD

The material defined by this standard is a lubricant containing organic solvents, mineral oil, and molybdenum disulfide.

FORD WSD-M13P7-A2 - LUBRICANT - WAX
July 2, 1992 - FORD

1. SCOPE This specification defines the requirements for a wax lubricant consisting of a blend of petroleum type waxes and either natural waxes or fatty esters.

9985712 - Lubricant, Rubber (Liquid Soap)
October 1, 2020 - GMNA

Material Description. The material defined in this specification is a lubricant suitable for diluting with water to various concentration and primarily for use as a lubricant to facilitate assembly of rubber parts. The usual mix is 1:10 parts lubricant to potable water. Symbols...

9986181 - Synthetic Polyalkylene Glycol Lubricant
October 1, 2020 - GMNA

Material Description. This specification defines the minimum acceptable requirements for synthetic polyalkylene glycol (PAG) lubricants for use in GM mobile air conditioning systems designed for HFC-134a refrigerant. This specification applies only to PAG lubricants approved for use...

9985406 - Lubricant, Rubber (Diluted Material)
April 1, 2020 - GMNA

Material Description. This specification describes a mixture of wetting agent and water suitable for use as a lubricant to facilitate assembly of rubber parts. Symbols. Not applicable. Applicability. This material is used as a lubricant to facilitate assembly of rubber parts. Remarks....

GMW18246 - Lubricant, Rubber (Nonwater Dilutable)
September 1, 2020 - GMW

The material defined in this specification is a rubber lubricant that is free of water and ideally suited for brake hose assembly. Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English...

GMW18247 - Lubricant, Rubber (Liquid Soap)
September 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. The material defined in this specification is a lubricant suitable...

MIL-DTL-25681 - LUBRICANT, MOLYBDENUM DISULFIDE, SILICONE
September 8, 2011 - NPFC

This specification covers one grade of lubricant for use on sliding surfaces subject to high temperatures in aircraft gas turbine engines. This lubricant is identified by NATO Code Number S- 1735

GMW18244 - Lubricant, Rubber (Diluted Material)
March 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. This specification describes a mixture of 0.5% wetting agent and water...

9985767 - Lubricant, General Purpose Fluorinated
October 1, 2020 - GMNA

Material Description. The material defined in this specification is a general purpose fluorinated lubricant. Symbols. Not applicable. Applicability. This material is intended for applications where high temperature resistance, non-flammability or non-reactivity with is required. This...

9986277 - Synthetic Polyol Ester Lubricant
October 1, 2016 - GMNA

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Material Description. This specification defines the minimum acceptable requirements for the specific...

9985784 - Lubricant, Rubber (Nonwater Dilutable)
September 1, 2020 - GMNA

The material defined in this specification is a rubber lubricant that is free of water and ideally suited for brake hose assembly. Material Description. Rubber lubricant made up of synthetic polypropylene glycol for use in brake and fuel system hose assemblies to assist in assembly....

FORD M2C7-A - SPECIAL WAY LUBRICANT
April 9, 2009 - FORD

The material desired under this standard is a refined inhibited mineral oil adhesive type way lubricant.

FORD M14B98-A - DRAWING COMPOUND LUBRICANT
December 1, 1991 - FORD

1. SCOPE: The material defined by this standard is a combination protective coating and lubricant film.

FORD M14B77-A - COLD HEADING LUBRICANT/COOLANT
July 1, 1989 - FORD

1. SCOPE: This material defined by this Standard is a lubricant, formulated with extreme pressure additives.

Advertisement