loading
AWWA METERS SET - AWWA METERS SET
AWWA
A description is not available for this item.
ASTM D7777-24 - Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
July 1, 2024 - ASTM International

1.1 This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0?°C and 40?°C (32?°F to 104?°F). Its application is restricted to samples with...

ASTM D5931-20(2025) - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
April 1, 2025 - ASTM International

5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize engine coolant concentrates and aqueous engine coolants. 5.2 Determination of the density or relative density of these products is necessary for the conversion...

ASTM D4052-22 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
May 1, 2022 - ASTM International

5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize both the light and heavy fractions of petroleum and petroleum products. 5.2 Determination of the density or relative density of petroleum and its products is...

ASTM D8188-23 - Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
May 1, 2023 - ASTM International

1.1 This test method covers the determination of the relative density and density of semi-solid asphalt materials, asphalt binders, asphalt cements, and soft-tar pitches by use of a digital density meter (U-tube). Note 1: Alternate methods for determining the...

ASTM B703-21(2026) - Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
March 1, 2026 - ASTM International

5.1 The apparent density is an important measure of a material characteristic of the powder that is useful to the powder producers and powder users in determining quality and lot to lot consistency. 5.2 This test method is applicable to free-flowing and non-free-flowing metal powders,...

ASTM D7777-13(2018)e1 - Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
October 1, 2018 - ASTM International

1.1 This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0 °C and 40 °C (32 °F to 104 °F). Its application is restricted to samples with...

ASTM D5931 - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
May 15, 2020 - ASTM

This test method covers the determination of the density or relative density of glycols, glycerin, heat transfer fluids, engine coolant concentrates, and aqueous engine coolants. This test method should not be applied to samples so dark in color that the absence of air bubbles in the...

ASTM D5931-20 - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
May 15, 2020 - ASTM International

5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize engine coolant concentrates and aqueous engine coolants. 5.2 Determination of the density or relative density of these products is necessary for the conversion...

ASTM D4052-18a - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
December 15, 2018 - ASTM International

5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize both the light and heavy fractions of petroleum and petroleum products. 5.2 Determination of the density or relative density of petroleum and its products is...

ASTM D4052 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
December 15, 2018 - ASTM

This test method covers the determination of the density, relative density, and API Gravity of petroleum distillates and viscous oils that can be handled in a normal fashion as liquids at the temperature of test, utilizing either manual or automated sample injection equipment. Its...

ASTM D4659-25 - Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
July 1, 2025 - ASTM International

4.1 These test methods are used for research or for quality control to characterize isocyanates used in polyurethane products. 4.2 A general test method for specific gravity using a digital density meter, which applies to isocyanates as well as other liquids is published in Test...

ASTM D4052-18 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
May 1, 2018 - ASTM International

5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize both the light and heavy fractions of petroleum and petroleum products. 5.2 Determination of the density or relative density of petroleum and its products is...

BS EN ISO 15212-1 - Oscillation-type density meters - Part 1: Laboratory instruments
June 15, 1999 - BSI

Specifies metrological and other requirements for oscillation-type density meters used in the laboratory and describes a method of adjustment and calibration.

ASTM D653-26a - Standard Terminology Relating to Soil, Rock, and Contained Fluids
May 15, 2026 - ASTM International

3.1 Definitions in this standard are to be regarded as the correct ones for terms found in other ASTM standards of Committee D18. Certain terms may be found in more than one standard issued under the jurisdiction of this committee and many of these terms have been placed in this standard. 3.2 Terms...

ASTM D6846-02(2026) - Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
June 1, 2026 - ASTM International

4.1 Laboratory proofing of inks is necessary to establish a reproducible prediction of print appearance and performance properties, most of which are highly sensitive to ink film thickness. The apparatus described in this practice has found wide use for routine control proofing because it provides...

ASTM C204-26 - Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
May 1, 2026 - ASTM International

1.1 These test methods cover determination of the fineness of hydraulic cement, using the Blaine air-permeability apparatus, in terms of the specific surface expressed as total surface area in square centimeters per gram, or square meters per kilogram, of cement. Two test methods are given:...

ASTM D6822-25 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
December 1, 2025 - ASTM International

1.1 This test method covers the determination, using a glass thermohydrometer and/or a separate (alternative) temperature measuring device in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures...

ASTM D4052-16 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
December 1, 2016 - ASTM International

5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize both the light and heavy fractions of petroleum and petroleum products. 5.2 Determination of the density or relative density of petroleum and its products is...

ASTM D653-26 - Standard Terminology Relating to Soil, Rock, and Contained Fluids
January 1, 2026 - ASTM International

3.1 Definitions in this standard are to be regarded as the correct ones for terms found in other ASTM standards of Committee D18. Certain terms may be found in more than one standard issued under the jurisdiction of this committee and many of these terms have been placed in this standard. 3.2 Terms...

Advertisement