loading
ASTM F1488-26a - Standard Specification for Coextruded Composite Pipe
August 1, 2026 - ASTM International

This specification covers coextruded composite pipe, produced by a coextrusion die system, in which the concentric layers are formed and combined before exiting the die. Coextruded composite pipe conforming to the requirements prescribed are used for different applications: IPS...

ASTM D7192-26 - Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
July 1, 2026 - ASTM International

4.1 This test method is designed to provide load versus deformation response of plastic films under essentially multi-axial deformation conditions at impact velocities. This test method further provides a measure of the rate sensitivity of the plastic films to impact. 4.2 Multi-axial impact...

ASTM B327-21(2026) - Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
April 1, 2026 - ASTM International

This specification covers aluminum-base and zinc-base master alloys used to make zinc die-casting alloys. The material may be made by any suitable process. The material covered by this specification shall be of uniform quality and shall be free of dross, flux, or other harmful contamination....

ASTM E155-20(2026) - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate the types and degrees of discontinuities that may be found in aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4 in. (6.35 mm) and 3/4 in. (19.1 mm). The reference radiograph films are an adjunct to this...

ASTM E390-20(2026) - Standard Reference Radiographs for Steel Fusion Welds
July 1, 2026 - ASTM International

1.1 This standard provides reference radiographs for steel fusion welds that contain typical discontinuities with varying severity levels in different thicknesses of material. The reference radiograph films are an adjunct to this standard and must be purchased separately from ASTM International if...

ASTM E689-20(2026) - Standard Reference Radiographs for Ductile Iron Castings
July 1, 2026 - ASTM International

1.1 This standard extends the application of steel casting Reference Radiographs E446, E186, and E280 when performing film radiography and Digital Reference Images E2868 and E3030 when performing digital radiography to ductile iron castings when determined appropriate for specific applications (see...

ASTM E802-21(2026) - Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness
July 1, 2026 - ASTM International

1.1 These reference radiographs for gray iron castings consist of one set of illustrations of centerline shrinkage with severity levels 1 to 5 using three radiation source types as follows: 1.1.1 Volume I: Medium Voltage (Nominal 250 kVp) X-ray Reference Radiographs-Set of 5 severity levels in a...

ASTM E192-20(2026) - Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
July 1, 2026 - ASTM International

1.1 The reference radiographs provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in thin-wall steel investment castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct reference...

ASTM E310-21(2026) - Standard Reference Radiographs for Tin Bronze Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in tin bronze and related alloy castings. The reference radiograph films are an adjunct to this document and must be purchased separately from ASTM International if needed (see 2...

ASTM E1320-20(2026) - Standard Reference Radiographs for Titanium Castings
July 1, 2026 - ASTM International

1.1 The reference radiographs provided in the adjunct to this standard are reproductions of original radiographs and are supplied as a means for establishing some of the categories and severity levels of discontinuities in titanium castings that may be revealed by radiographic examination. Use of...

ASTM E1648-20(2026) - Standard Reference Radiographs for Examination of Aluminum Fusion Welds
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various types and severity levels of discontinuities in aluminum fusion welds that may be revealed by radiographic examination. These reference radiographs do not specify the acceptable level of these discontinuities, rather they provide a visual reference...

ASTM E186-20(2026) - Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses of 2?in. to less than 41/2 in. (50.8?mm to 114 mm). The reference radiograph films are an adjunct to this document and must be...

ASTM E280-21(2026) - Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses of 41/2 in. to 12?in. (114?mm to 305 mm). The reference radiograph films are an adjunct to this document and must be purchased...

ASTM E446-20(2026) - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses up to 2 in. (50.8 mm) (see Note 2). The reference radiograph films are an adjunct to this standard and must be purchased separately...

ASTM B85/B85M-25 - Standard Specification for Aluminum-Alloy Die Castings
December 1, 2025 - ASTM International

1.1 This specification covers all registered2 aluminum-alloy die castings with the most common designated as shown in Table 1. 1.2 This specification is for aluminum-alloy die castings used in general purpose applications. It may not address the mechanical properties, integrity...

ASTM B703-21(2026) - Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
March 1, 2026 - ASTM International

5.1 The apparent density is an important measure of a material characteristic of the powder that is useful to the powder producers and powder users in determining quality and lot to lot consistency. 5.2 This test method is applicable to free-flowing and non-free-flowing metal powders, lubricated...

ASTM B793-16(2026) - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
April 1, 2026 - ASTM International

This specification covers the standard requirements for commercial zinc casting alloys in ingot form for use in the manufacture of sheet metal forming dies, sand cast or plaster cast forming dies, and plastic injection molds. Kirksite A alloy (UNS Z35543) is intended for use in the...

ASTM D7050-04(2026) - Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties
April 1, 2026 - ASTM International

3.1 In accordance with Specification D2227, shipments of TSR10 and TSR20 must meet a minimum initial Wallace plasticity (Po) of 30 to be accepted. However, even with this minimum restriction, the uncured viscoelastic or "processability" properties are allowed to vary greatly. This variation in...

ASTM B909-21a(2026) - Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
April 1, 2026 - ASTM International

4.1 The property KIc, determined by Test Method E399 or ISO 12135, characterizes a material's resistance to fracture in a neutral environment and in the presence of a sharp crack subjected to an applied opening force or moment within a field of high constraint to lateral plastic flow (plane strain...

ASTM B210/B210M-26 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
April 1, 2026 - ASTM International

This specification covers aluminum and aluminum-alloy drawn seamless tubes in straight lengths and coils for general purpose. The tube shall be produced by drawing an extruded tube made from hollow extrusion ingot (cast in hollow form or pierced) and extruded by the use of the die and...

Advertisement