loading
ASTM D6387-19(2026) - Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
June 1, 2026 - ASTM International

1.1 These test methods cover the determination of the amounts of a-pinene, ß-pinene, dipentene, terpene alcohols, and other terpene compounds in turpentine and related terpene products using capillary gas chromatography. The two methods for determining the amount of the individual terpene compounds...

ASTM E1018-26 - Standard Guide for Application of ASTM Recommended Cross Section and Associated Nuclear Data File
June 1, 2026 - ASTM International

4.1 The ENDF/B library in the United States and similar libraries elsewhere, such as JEFF (21), JENDL (22), and BROND (24), provide a compilation of neutron cross section and other nuclear data for use by the nuclear community. The availability of these excellent evaluations makes possible a...

ASTM D3241-26 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
March 1, 2026 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM D4603-26 - Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
April 1, 2026 - ASTM International

1.1 This test method is for the determination of the inherent viscosity of poly(ethylene terephthalate) (PET) soluble at 0.50?% concentration in a 60/40 phenol/1,1,2,2-tetrachloroethane solution by means of a glass capillary viscometer. Highly crystalline forms of PET that are not soluble in this...

ASTM D3241-25a - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
December 1, 2025 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM E3057-26 - Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
January 1, 2026 - ASTM International

5.1 Need for Heat Flux Measurements: 5.1.1 Independent measurements of temperature and heat flux support the development and validation of engineering models of fires and other high environments, such as furnaces. For tests of fire protection materials and structural assemblies, temperature and...

ASTM D3241-25 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
October 1, 2025 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM D7138-25 - Standard Test Method to Determine Melting Temperature of Synthetic Fibers
November 1, 2025 - ASTM International

5.1 Either of these two test methods is used to determine the temperature at which a synthetic fiber specimen changes from a solid to a liquid-like state. 5.1.1 Synthetic fibers may be either amorphous or semi-crystalline thermoplastics or thermosets. Synthetic fibers may change from the solid to a...

ASTM D8114-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM D8226-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856?kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM E1194-25 - Standard Test Method for Vapor Pressure
July 1, 2025 - ASTM International

1.1 This test method describes procedures for measuring the vapor pressure of pure liquid or solid compounds. No single technique is able to measure vapor pressures from 1?×?10-11 to 100 kPa (approximately 10-10 to 760 torr). The subject of this standard is gas saturation which is capable of...

ASTM D2435/D2435M-25 - Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
June 1, 2025 - ASTM International

5.1 The data from the consolidation test are used to estimate the magnitude and rate of both differential and total settlement of soils or earthfill, or both, induced by loading of a structure or additional earthfill. Estimates of this type are of key importance in the design of engineered...

ASTM F3169-16(2024) - Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
November 1, 2024 - ASTM International

1.1 Test Packages-This test method can be applied to non-porous blister packs sealed with flexible films such as those used in pharmaceutical packaging. Such blister packs typically consist of thermoformed polymer or cold formed aluminum trays that contain a number of individual blister pockets...

ASTM F2625-24 - Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
March 15, 2024 - ASTM International

5.1 The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity will depend on the integration range used to determine the heat of fusion, and the theoretical heat of fusion of 100?% crystalline polyethylene used to calculate...

ASTM D1442-06(2024) - Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
June 1, 2024 - ASTM International

5.1 Information regarding the percentage of immature fibers is desirable because immature fibers: (1) break easily during processing; (2) have a tendency to form neps; (3) have a tendency to become entangled around particles of trash and leaf, thus making cleaning more difficult and increasing the...

ASTM D3241-24 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
March 1, 2024 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM C1774-24 - Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
March 15, 2024 - ASTM International

5.1 A key aspect in understanding the thermal performance of cryogenic insulation systems is to perform tests under representative and reproducible conditions, simulating the way that the materials are actually put together and used in service. Therefore, a large temperature differential...

ASTM D3241-23a - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
October 1, 2023 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM D3241-23ae1 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
October 1, 2023 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM D6387-19(2023) - Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
October 1, 2023 - ASTM International

1.1 These test methods describe the determination of the amounts of a-pinene, ß-pinene, dipentene, terpene alcohols, and other terpene compounds in turpentine and related terpene products using capillary gas chromatography. The two methods for determining the amount of the individual terpene...

Advertisement