loading
ASTM E2253-26 - Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
July 1, 2026 - ASTM International

1.1 This test method provides procedures for validating temperature and enthalpy measurements of differential scanning calorimeters (DSC) and analytical methods based upon the measurement of temperature or enthalpy (or heat), or both, by DSC. Performance parameters determined include...

ASTM E2071-21(2026) - Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
July 1, 2026 - ASTM International

1.1 This practice describes the calculation of the heat of vaporization of a liquid or the heat of sublimation of a solid from measured vapor pressure data. It is applicable to pure liquids, azeotropes, pure solids, and homogenous solid solutions over the temperature range for which the vapor...

ASTM E2930-26 - Standard Practice for Pressure Decay Leak Test Method
July 1, 2026 - ASTM International

5.1 The equipment, test duration, and technique should be determined before commencement of the test based on the required test sensitivity or accuracy (see Annex A1 and Annex A2). If the test is used to certify that the vessel has a maximum specified leakage rate, then the test equipment and test...

ASTM E2550-26 - Standard Test Method for Thermal Stability by Thermogravimetry
July 1, 2026 - ASTM International

5.1 Thermogravimetry provides a rapid method for determining the thermal decomposition and reaction mass change of a material. 5.2 This test method is useful in detecting potentially hazardous reactions and in estimating the temperatures at which these reactions occur. This test method is...

ASTM A924/A924M-26 - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
July 1, 2026 - ASTM International

1.1 This specification covers the general requirements that, unless otherwise specified in the product specification, apply to steel sheet in coils and cut lengths, metallic-coated on continuous lines by the hot-dip process. The product is intended for applications requiring corrosion resistance....

ASTM D6387-19(2026) - Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
June 1, 2026 - ASTM International

1.1 These test methods cover the determination of the amounts of a-pinene, ß-pinene, dipentene, terpene alcohols, and other terpene compounds in turpentine and related terpene products using capillary gas chromatography. The two methods for determining the amount of the individual terpene compounds...

ASTM E1018-26 - Standard Guide for Application of ASTM Recommended Cross Section and Associated Nuclear Data File
June 1, 2026 - ASTM International

4.1 The ENDF/B library in the United States and similar libraries elsewhere, such as JEFF (21), JENDL (22), and BROND (24), provide a compilation of neutron cross section and other nuclear data for use by the nuclear community. The availability of these excellent evaluations makes possible a...

ASTM E283/E283M-26 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
April 1, 2026 - ASTM International

1.1 This test method covers a standard laboratory procedure for determining the air leakage rates of exterior windows, skylights, curtain walls, and doors under specified differential pressure conditions across the specimen. The test method described is for tests with constant temperature...

ASTM D1415-18(2026) - Standard Test Method for Rubber Property—International Hardness
April 1, 2026 - ASTM International

1.1 This test method covers a procedure for measuring the hardness of vulcanized or thermoplastic rubber. The hardness is obtained by the difference in penetration depth of a specified dimension ball under two conditions of contact with the rubber: (1) with a small initial force and (2) with a much...

ASTM E3469-26 - Standard Practice for Validating End-User Sterilizing Filtration of Pharmaceutical, Biopharmaceutical, and Biological Products
April 1, 2026 - ASTM International

1.1 Process validation of sterilizing filtration is required by industry standards and regulatory agencies to ensure that process fluid contact with the filter under actual worst-case process-use conditions (that is, time, flux, temperature, and pressure differential) do not adversely affect...

ASTM E3137/E3137M-26 - Standard Specification for Heat Meter Instrumentation
March 1, 2026 - ASTM International

1.1 This specification defines general specifications for heat meters. Heat meters are instruments that measure heat in heat exchange circuits in which energy is absorbed (cooling) or given up (heating) by a flowing liquid. 1.2 For this specification, the necessary elements of a heat meter consist...

ASTM D4603-26 - Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
April 1, 2026 - ASTM International

1.1 This test method is for the determination of the inherent viscosity of poly(ethylene terephthalate) (PET) soluble at 0.50?% concentration in a 60/40 phenol/1,1,2,2-tetrachloroethane solution by means of a glass capillary viscometer. Highly crystalline forms of PET that are not soluble in this...

ASTM F2100-26 - Standard Specification for Medical Face Masks
February 15, 2026 - ASTM International

This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing for bacterial...

ASTM D3241-26 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
March 1, 2026 - ASTM International

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. 1.2 The differential pressure values in mm Hg are defined only in terms of this test method. 1.3 The deposition values stated in SI units shall...

ASTM E2069-25 - Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters on Cooling
December 1, 2025 - ASTM International

1.1 This test method describes the temperature calibration of differential scanning calorimeters (DSCs) on cooling using the difference between transition temperatures upon heating and cooling in the temperature range of 65 °C to 420 °C. Within this temperature range, an offset in the...

ASTM D5028-25 - Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
December 1, 2025 - ASTM International

1.1 This test method covers determination of curing parameters of pultrusions resins by differential scanning calorimetry. 1.2 This test method is applicable to pultrusion resin solutions with adequate initiator(s). 1.3 The normal operating temperature range is from 0 to 200°C. Note 1: Resin...

ASTM E928-25 - Standard Test Method for Purity by Differential Scanning Calorimetry
September 1, 2025 - ASTM International

1.1 This test method describes the determination of purity of materials greater than 98.5 mol % purity using differential scanning calorimetry and the van't Hoff equation. 1.2 This test method is applicable to thermally stable compounds with well-defined melting temperatures (that is, not...

ASTM D7201-26 - Standard Test Method for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
January 1, 2026 - ASTM International

5.1 Users of this test method must determine for themselves whether the practices described meet the requirements of local or national authorities regulating asbestos or other fibrous hazards (for example, the test method must be used within the parameters set out in Appendix A of the U.S. OSHA...

ASTM B43-26 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes
January 1, 2026 - ASTM International

This specification covers seamless red brass pipe in all nominal pipe sizes, both regular and extra-strong. The pipe in the annealed temper shall be suitable for use in plumbing, boiler feed lines, and for similar purposes. In the drawn general purpose temper, the pipe shall be suitable for...

ASTM E2785-26 - Standard Practice for Exposure of Firestop Materials to Various Specified Enhanced Environmental Factors
January 1, 2026 - ASTM International

5.1 This practice is intended to evaluate the material performance after exposure to specified environmental factors. It is understood that these performance values are dependent upon these specified exposure periods and intensities of environmental factors. Other values are possible if the...

Advertisement