loading
PCMCIA SYSTEM - PCMCIA SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
IEEE INFORMATION - INFORMATION GRAPHICS: A COMPRHENSIVE ILLUSTRATED REFERENCE
IEEE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP SI - 2020 ASHRAE Handbook HVAC Systems and Equipment SI Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP IP - 2020 ASHRAE Handbook HVAC Systems and Equipment I-P Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
IEEE INFORMATION THEORY: - INFORMATION THEROY: 50 YEARS OF DISCOVERY
IEEE
A description is not available for this item.
ASTM E1996-26 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
June 15, 2026 - ASTM International

1.1 This specification covers exterior windows, glazed curtain walls, doors, and impact protective systems used in buildings located in geographic regions that are prone to hurricanes. 1.1.1 Exception-Exterior garage doors and rolling doors are governed by ANSI/DASMA 115...

ASTM E2128-26 - Standard Guide for Evaluating Water Leakage of Building Walls
July 1, 2026 - ASTM International

1.1 This guide covers methods for determining and evaluating causes of water leakage of exterior walls. For this purpose, water penetration is considered leakage, and therefore problematic, if it exceeds the planned resistance or temporary retention and drainage capacity of the wall, is causing or...

ASTM E1976-26 - Standard Specification for Shelter, Tactical, Nonexpandable
March 15, 2026 - ASTM International

1.1 This specification covers a rigid wall, nonexpandable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels, and meeting the International Organization for Standardization (ISO) Cargo Container specification. Nominal dimensions are: height 8 ft, width 8 ft, and length...

ASTM F3463-26 - Standard Guide for Ensuring the Safety of Connected Consumer Products
April 1, 2026 - ASTM International

4.1 This guide is intended to apply in conjunction with applicable end-product specific performance or design standard requirements to address the overall system safety of a connected consumer product. Designers and manufacturers of a connected consumer product, with assistance from...

ASTM F3218-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Robotic, Automatic, or Autonomous System Test Methods
September 1, 2025 - ASTM International

1.1 This practice describes "System" as a robotic, automatic, or autonomous system (for example, robot arm; automatic machine; automatic, automated, or autonomous?-?uncrewed ground vehicle (A-UGV)). When conducting test methods, it is important to consider the role that the...

ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM F1592-12(2025) - Standard Test Methods for Detention Hollow Metal Vision Systems
June 1, 2025 - ASTM International

1.1 These test methods cover fixed detention hollow metal vision systems of various materials and types of construction. These fixed hollow metal vision systems are used in wall openings in detention and correctional institutions designed to incarcerate inmates. 1.2 Frame assemblies...

ASTM F2927-21(2024) - Standard Test Method for Door Systems Subject to Airblast Loadings
October 1, 2024 - ASTM International

5.1 This test method provides standardized procedures that must be followed to establish that a particular door assembly meets a defined damage category (Table 1). Test results can be used to specify a door assembly for a particular pressure/time loading and damage level. 5.2 When a...

ASTM E3456-25 - Standard Practice for On-Site Identification of Firestop Systems and Judgments
June 1, 2025 - ASTM International

1.1 This practice covers the identification requirements for installed firestop systems (FS), fire-resistive joint systems (FRJS), perimeter fire containment systems (PFCS), and continuity head-of-wall joint systems (CHWJS). These systems are installed on, in, or...

ASTM F2912-25 - Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
April 15, 2025 - ASTM International

1.1 This specification covers glazing, glazed windows, glazed curtain walls, glazing panels in doors, other glazed protective systems, and non-attached window retrofit systems used in buildings that may be subjected to intentional or accidental explosions. 1.2 This...

ASTM E2226-25 - Standard Practice for Application of Hose Stream
April 1, 2025 - ASTM International

1.1 This practice is applicable to building elements required to be subjected to the impact, erosion, and cooling effects of a hose stream as part of a fire-test-response standard. Building elements include, but are not limited to, wall and partition assemblies, fire-resistive joint systems,...

Advertisement