This document specifies the dimensions, in millimetres, of rotary and rotary impact masonry drill bits with hardmetal tips, having diameters in the range of 4 mm to 25 mm inclusive and overall, and working lengths in the series short, long and extra-long. It does not apply to hammer...
This part of ISO 9714 specifies materials and mechanical properties, and dimension and marking requirements for drill bits, taps and countersink cutters made of stainless steel for use in orthopaedic surgery with bone screws specified in ISO 5835. NOTE The interrelationship of...
1.1 This guide covers how direct (straight) air-rotary drilling procedures may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices. Note 1: The term direct with respect to the air-rotary drilling method of this guide indicates that...
4.1 Hollow-stem augers are frequently used for geotechnical exploration. One reason they are used is that the method is considered a "dry" drilling method where drill fluids are not needed to advance the borehole in unstable formations. Often, hollow-stem augers are used with other...
1.1 This guide covers how casing advancement drilling and sampling procedures may be used for geoenvironmental exploration and installation of subsurface water quality monitoring devices. 1.2 Different methods exist to advance casing for geoenvironmental exploration. Selection of a...
1.1 This guide covers how direct (straight) rotary-drilling procedures with water-based drilling fluids may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices. Note 1: The term direct with respect to the rotary-drilling...
5.1 Sonic drilling is a rapid, primarily dry drilling method (see 5.2), used both in geotechnical applications to avoid hydraulic fracturing, and in environmental site exploration. Geotechnical applications include exploration for tunnels, underground excavations, and installation of...
1.1 This guide covers how direct (straight) wireline rotary casing advancement drilling and sampling procedures may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices. Note 1: The term "direct" with respect to the rotary drilling...
Dimensions, one-piece bits including pilot and reamer bits and tungsten carbide tips with appropriate hardness grades. Materials and slot for bit, pitch of rod, straightness, and interchangeability requirements.
Narrow Your Results