4.1 While end-use product performance and durability remain critical for functionality, the focus on recycling rigid PVC products or components at their end of life needs to be intensified. Participants in the value chain (for example, material scientists, product designers, procurement, and...
A strategic and operational guide to using 3D printing to drive value in the supply chain-featuring case studies and illustrated examples from across industries After many years as a tool for designers, 3D printing today promises to revolutionize supply chains. Cut through the...
The drop forged rivetless chain has widespread use in many industries on trolleys, scraper flights, assembly, and similar conveyors. Because materials do not tend to pack in its open structure, the drop forged rivetless chain is used extensively for flight conveyors. Its design...
This Standard gives guidelines for the selection of chain drives, composed of a roller chainlbush chain (hereafter referred to as a chain), and sprockets conforming with JIS B 1801. An example of the chain and sprocket drive selection is shown in Annex A,...
Drop Forged Rivetless Chain has widespread use in many industries on trolley, scraper flights, assembly and similar conveyors. Because materials do not tend to pack in its open structure, Drop Forged Rivetless Chain is used extensively for flight conveyors. Its design permits both...
This specification establishes the material requirements and installation procedures for driven steel post drive anchor systems. It provides an alternative to the use of concrete footings for the purpose of installing steel post frameworks to support chain link, expanded metal, welded...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
5.1 APC is the foundation to smart manufacturing. Smart manufacturing has emerged as one key concept as the industry transitions to an Industry 4.0 paradigm. FDA has also recognized this industry trend and published a perspective paper on Industry 4.0 in the International Journal of Pharmaceutics...
1.1 These test methods specify procedures and apparatus used for testing and evaluating selectorized strength equipment for compliance to Specification F2216. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies...
1.1 This test method measures cut resistance of garments and devices worn to protect the lower body (legs) when operating a chainsaw. 1.2 This test method may be used to test for compliance to minimum performance requirements in established safety standards. 1.2.1 By agreement between the purchaser...
5.1 The purpose of this test method is to provide a measurable criterion of performance about the level of cut resistance provided by different types of protective garments and protective coverings worn by chainsaw operators. 5.2 This test method is intended to show to what level a protective...
This specification establishes parameters for the design and manufacture of fitness equipment intended for use by individuals age 12 and above. The design and construction requirements for the following are specified: (1) stability, (2) support, (3) edges, corners, and tube ends, and (4) moving...
5.1 The purpose of this test method is to provide a measurable criterion of performance defining the level of cut resistance to the cutting action of a saw chain provided by foot protective devices. 5.2 The protection which can be demonstrated by the foot protective devices tested in...
1.1 This guide discusses methodologies that can be applied to evaluate the potential for the movement (that is, pore-scale mobility or NAPL body-scale migration) of non-aqueous phase liquid (NAPL) in sediments. NAPL movement assessment in sediments is significantly different than in upland soils....
1.1 This guide discusses methodologies that can be applied to evaluate the potential for the movement (that is, pore-scale mobility or NAPL body-scale migration) of non-aqueous phase liquid (NAPL) in sediments. NAPL movement assessment in sediments is significantly different than in upland soils....
5.1 This practice allows the user to evaluate the effect of service or accelerating aging on the oxygen resistance of polymeric materials used in oxygen service. 5.2 The use of this practice presupposes that the properties used to evaluate the effect of aging can be shown to relate to the intended...
Narrow Your Results