loading
ASTM C1277-26 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
July 15, 2026 - ASTM International

This specification covers the materials and testing of shield hubless couplings to join hubless cast iron soil pipe and fittings. Gaskets shall comply with the required physical and chemical properties, dimensions, and material specifications. The rubber gasket shall conform to the required...

ASTM C1115-17(2026) - Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
April 1, 2026 - ASTM International

8.1 This specification describes types (based on resistance to tearing and compression set), grades (based on durometer hardness), class (based on flame propagation requirements), and surfaces (based on surface characteristics) of products as listed in Section 4 for various applications. It...

ASTM D1415-18(2026) - Standard Test Method for Rubber Property—International Hardness
April 1, 2026 - ASTM International

4.1 The International Hardness test is based on measurement of the penetration of a rigid ball into the rubber specimen under specified conditions. The measured penetration is converted into IRHD, the scale of degrees being so chosen that 0 represents a material having an elastic modulus of zero,...

ASTM D2287-26 - Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
February 1, 2026 - ASTM International

This specification covers nonrigid vinyl chloride polymer and copolymer classes in which the resin portion of the composition contains at least 90 % vinyl chloride. The remaining 10 % may include one or more monomers copolymerized with vinyl chloride or consist of other resins mechanically blended...

ASTM E2203-14(2025) - Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
October 1, 2025 - ASTM International

This specification covers the properties of products made from dense thermoplastic elastomers used for compression seals, gaskets, setting blocks, spacers, and accessories for building construction sealing and glazing applications. The products are categorized into types according to resistance to...

ASTM F2872-25 - Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
September 1, 2025 - ASTM International

This specification covers the general requirements for the 225/75R16C 116/114S radial light truck (European light duty vehicle) standard reference test. In this specification, a 16.0 rim diameter code standard tire design and constructions, standard dimensions, and specific conditions of storage...

ASTM F2871-25 - Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
July 1, 2025 - ASTM International

This specification contains the general requirements for the 245/7OR19.5 136/134M radial truck standard reference test. Provided in this specification is a 19.5 rim diameter code standard truck design and construction, standard dimensions, and standard conditions of storage. A reference tire is...

ASTM F1957-24 - Standard Test Method for Composite Foam Hardness-Durometer Hardness
November 1, 2024 - ASTM International

1.1 This test method describes a type of composite foam hardness measurement device known as durometer: Type CF. The procedure for determining indentation hardness of substances comprised of two or more elastomeric materials, one of which is a foam or foam like material. These are classified...

ASTM D7216-25 - Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
July 1, 2025 - ASTM International

1.1 This test method covers quantitative procedures for the evaluation of the compatibility of automotive engine oils with several reference elastomers typical of those used in the sealing materials in contact with these oils. Compatibility is evaluated by determining the changes in volume,...

ASTM D5926-25 - Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
May 1, 2025 - ASTM International

This specification describes material and physical requirements for virgin nonrigid poly(vinyl chloride) (PVC) preformed molded and spliced gaskets used in mechanical couplings for gravity flow drain, waste, and vent (DWV), sewer, sanitary, and storm plumbing systems. They include couplings that...

ASTM D4289-24a - Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
July 1, 2024 - ASTM International

1.1 This test method evaluates the compatibility of lubricating greases and fluids with coupons cut from standard elastomer sheets (Practice D3182). Compatibility is evaluated by determining the changes in volume and Durometer A hardness that occur when elastomer coupons are totally immersed...

ASTM D4289-24 - Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
June 1, 2024 - ASTM International

1.1 This test method evaluates the compatibility of lubricating greases and fluids with coupons cut from standard elastomer sheets (Practice D3182). Compatibility is evaluated by determining the changes in volume and Durometer A hardness that occur when elastomer coupons are totally immersed...

ASTM D6134/D6134M-07(2024) - Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
May 1, 2024 - ASTM International

This specification covers unreinforced vulcanized rubber sheets made from ethylene propylene diene terpolymer (EPDM) or butyl (IIR), intended for use in preventing water under hydrostatic pressure from entering a structure. The tests and property limits used to characterize these sheets are...

ASTM F2871-23 - Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
September 1, 2023 - ASTM International

This specification contains the general requirements for the 245/7OR19.5 136/134M radial truck standard reference test. Provided in this specification is a 19.5 rim diameter code standard truck design and construction, standard dimensions, and standard conditions of storage. A reference tire is...

ASTM F2870-23 - Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
September 1, 2023 - ASTM International

This specification covers the general requirements for the 315/70R22.5 154/150L radial truck standard reference tire. Provided in this specification is a 22.5 rim diameter code standard truck tire design and construction, standard dimensions and standard condition of storage. This specified tire is...

ASTM D7216-23 - Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
October 1, 2023 - ASTM International

1.1 This test method covers quantitative procedures for the evaluation of the compatibility of automotive engine oils with several reference elastomers typical of those used in the sealing materials in contact with these oils. Compatibility is evaluated by determining the changes in volume,...

J2236_202306 - Standard Method for Determining Continuous Upper Temperature Limit of Elastomers
June 27, 2023 - SAE International

This method is intended to define the continuous upper temperature limit (CUTL) of thermoplastic elastomers and thermoset rubber with durometer hardness <=90 Shore A, to oxidation or other degradation when exposed solely to hot air for an extended period of time.

ASTM D7735-17(2022) - Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
December 1, 2022 - ASTM International

1.1 This test method covers Type A Durometer hardness of thermoplastic pavement marking material at elevated temperatures. 1.2 This test method is similar to Test Method D2240 for hardness with special attention given to keeping the temperature of the test sample and instrument constant....

ASTM D4950-22 - Standard Classification and Specification for Automotive Service Greases
December 1, 2022 - ASTM International

1.1 This specification covers lubricating greases suitable for the periodic relubrication of chassis systems and wheel bearings of passenger cars, trucks, and other vehicles. 1.2 This specification defines the requirements used to describe the properties and performance characteristics of chassis...

ASTM D2240-15(2021) - Standard Test Method for Rubber Property-Durometer Hardness
June 15, 2021 - ASTM International

1.1 This test method covers twelve types of rubber hardness measurement devices known as durometers: Types A, B, C, D, DO, E, M, O, OO, OOO, OOO-S, and R. The procedure for determining indentation hardness of substances classified as thermoplastic elastomers, vulcanized (thermoset) rubber,...

Advertisement