loading
ASTM D3223-17(2025) - Standard Test Method for Total Mercury in Water
December 1, 2025 - ASTM International

5.1 The presence of mercury in industrial discharge, domestic discharge, and potable water is of concern to the public because of its toxicity. Regulations and standards have been established that require the monitoring of mercury in water. This test method provides an analytical...

ASTM D1687-17(2025) - Standard Test Methods for Chromium in Water
July 1, 2025 - ASTM International

4.1 Hexavalent chromium salts are used extensively in metal finishing and plating applications, in anodizing aluminum, and in the manufacture of paints, dyes, explosives, and ceramics. Trivalent chromium salts are used as mordants in textile dyeing, in the ceramic and glass industry, in the leather...

ASTM D8543-24 - Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS)
May 1, 2024 - ASTM International

1.1 This test method covers the identification and simultaneous measurement of extractable chlorinated pesticides and polychlorinated biphenyls (PCBs) by gas chromatography/mass spectrometry/mass spectrometry (GC/MS/MS). 1.2 This test method has been validated for wastewater influents,...

ASTM D8543-23 - Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS)
December 1, 2023 - ASTM International

5.1 Pesticides and PCBs are Environmental Protection Agency (EPA)-regulated contaminants in treated drinking water, wastewater, and ground water. Liquid-liquid and solid-phase extraction (SPE) are generally applicable procedures for extracting these target analytes before GC/MS/MS analysis. 5.2...

ASTM D6104-97(2024) - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
April 1, 2024 - ASTM International

5.1 The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the EPA prohibits "the discharges of oil that cause a film or sheen upon or cause discoloration of the surface of...

ASTM D7742-17(2024) - Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 = n = 18) and Octylphenol Polyethoxylates (OPnEO, 2 = n = 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
April 1, 2024 - ASTM International

5.1 This practice has been developed in support of the U.S. EPA Office of Water, Office of Science and Technology by the Chicago Regional Laboratory (CRL). 5.2 Nonylphenol (NP) and Octylphenol (OP) have been shown to have toxic effects in aquatic organisms. The prominent source of NP and OP is from...

ASTM D6157-97(2024) - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
April 1, 2024 - ASTM International

5.1 The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the EPA, in 40 CFR Ch. 1, prohibits "the discharges of oil that cause a film or sheen upon or cause discoloration...

ASTM E3358-23a - Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization
August 1, 2023 - ASTM International

4.1 PFAS are widely used in commercial and industrial applications worldwide (see Fig. 1). PFAS are of concern due to their documented persistence and their studied impacts on human health and the environmental. While there is no comprehensive source of information on the many individual PFAS...

ASTM E3358-23 - Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization
February 1, 2023 - ASTM International

4.1 PFAS are widely used in commercial and industrial applications worldwide (see Fig. 1). PFAS are of concern due to their documented persistence and their studied impacts on human health and the environmental. While there is no comprehensive source of information on the many individual PFAS...

ASTM E1525-02(2023) - Standard Guide for Designing Biological Tests with Sediments
January 1, 2023 - ASTM International

1.1 As the contamination of freshwater and saltwater ecosystems continues to be reduced through the implementation of regulations governing both point and non-point source discharges, there is a growing emphasis and concern regarding historical inputs and their influence on water and...

ASTM E1367-03(2023) - Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
January 1, 2023 - ASTM International

5.1 General: 5.1.1 Sediment provides habitat for many aquatic organisms and is a major repository for many of the more persistent chemicals that are introduced into surface waters. In the aquatic environment, most anthropogenic chemicals and waste materials including toxic organic and inorganic...

Handbook of Paper and Pulp Chemicals
January 1, 2021 - SIR

Paper and pulp processing and additive chemicals represent a $10 billion a year global industry. These chemicals are an integral part of the total papermaking process from pulp slurry, through sheet formation, to effluent disposal. Environmental concerns, increased use of recycled waste...

CSA W203 - Planning, design, operation, and maintenance of wastewater treatment in northern communities using lagoon and wetland systems
January 1, 2019 - CSA

This Standard specifically addresses the planning, design, operation, and maintenance of intermittent/ seasonal discharge lagoon and wetland systems that are most appropriate for use in Northern regions, where effluent discharge is either difficult or not possible in colder...

ISO 16640 - Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals
January 1, 2021 - ISO

This document focuses on monitoring the activity concentrations of radioactive gases. They allow the calculation of the activity releases, in the gaseous effluent discharge from facilities producing positron emitting radionuclides and radiopharmaceuticals. Such facilities produce...

NSF 245 - Residential Wastewater Treatment Systems – Nitrogen Reduction
June 4, 2019 - NSF

This Standard contains minimum requirements for residential wastewater treatment systems having rated treatment capacities of 1514 L/d (400 gal/d) to 5678 L/d (1500 gal/d) that are designed to provide reduction of nitrogen in residential wastewater. Management methods for the treated...

ISO 20043-1 - Measurement of radioactivity in the environment — Guidelines for effective dose assessment using environmental monitoring data — Part 1: Planned and existing exposure situation
January 1, 2021 - ISO

These international guidelines are based on the assumption that monitoring of environmental components (atmosphere, water, soil and biota) as well as food quality ensure the protection of human health[2][4][5][6][7][8]. The guidelines constitute a basis for the setting of national regulations and...

ASTM E1218-21 - Standard Guide for Conducting Static Toxicity Tests with Microalgae
November 1, 2021 - ASTM International

5.1 Tests with algae provide information on the toxicity of test materials to an important component of the aquatic biota and might indicate whether additional testing (2) is desirable. Specific testing procedures under various regulatory jurisdictions follow procedures similar to those described...

NR/L2/RMVP/27176 - Controlled Emission Toilet Servicing Installation (aka NR/SP/ELP/27176)
September 5, 2020 - NR

This standard provides guidance on the design and installation of controlled effluent retention facility in Network rail owned, leased or hired depot. It specifies requirements for waste extraction using vacuum assistance from rolling stock through hoses into holding tanks, filtering,...

NSF 40 - Residential Wastewater Treatment Systems
April 18, 2019 - NSF

This Standard contains minimum requirements for residential wastewater treatment systems having rated treatment capacities between 1,514 L per day (400 gal per day) and 5,678 L per day (1,500 gal per day). Management methods for the treated effluent discharged from residential...

Environmental Control in Thermal Power Plants
April 9, 2021 - CRC

From wood and coal to predominantly oil and natural gas. Thermal Power Plants use fuels for power generation. Water is used for process, cooling, as well as for service/drinking requirement. Chemicals are used for conditioning of water, corrosion-control and sometimes for conditioning of fuel as...

Advertisement