4.1 The design and operation of a self-contained irradiator should ensure that reproducible absorbed doses are obtained when the same irradiation parameters are used. Dosimetry is performed to determine the relationship between the irradiation parameters and the absorbed dose. 4.1.1 For most...
4.1 This practice was written primarily to guide test participants in establishing, identifying, maintaining, and using suitable environments for conducting high quality neutron tests. Its development was motivated, in large measure, because inadequate controls in the neutron effects test process...
5.1 This practice is important in characterizing the radiation hardness of electronic devices irradiated by neutrons. This characterization makes it feasible to predict some changes in operational properties of irradiated semiconductor devices or electronic systems. To facilitate uniformity of the...
1.1 This practice covers procedures for detecting the sources of gas leaking at the rate of 1 × 10-6 Pa m3/s [1 × 10-5 standard cm3/s] or greater. This may be used to locate a leak on any object that can be pressurized with a gas that is detectable by a solid-state detector. The test sensitivity...
4.1 The design and operation of a self-contained irradiator should ensure that reproducible absorbed doses are obtained when the same irradiation parameters are used. Dosimetry is performed to determine the relationship between the irradiation parameters and the absorbed dose. 4.1.1 For most...
4.1 The guide is intended to be used to assess competencies of qualified individuals who wish to become certified as an Aircraft Electronics Technician through a certification program. 4.2 The guide is intended to be used in concert with a certification provider's structure and materials for...
5.1 This practice provides information necessary to document the accuracy and performance of an acoustic emission system. This information is useful for reference purposes to assure that the instrumentation performance remains consistent with time and use, and provides the information needed to...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
1.1 This guide is intended to assist design engineers, manufacturing/indust
5.1 Concepts: 5.1.1 This guide summarizes the equipment, field procedures and interpretation methods used for the investigation of subsurface materials and geological structure as based on their properties to conduct, enhance or obstruct the flow of electrical currents induced in the ground by an...
1.1 This practice details the minimum requirements for installation, commissioning, operations, and maintenance processes to ensure safe and reliable power generation for the expected life of the photovoltaic system. Specifically dealing with commercial photovoltaic installations, this practice...
Narrow Your Results