loading
ASTM E2813-26 - Standard Practice for Building Enclosure Commissioning
April 1, 2026 - ASTM International

6.1 This practice is intended to serve as a concise, authoritative, and technically sound practice for building enclosure commissioning (BECx) that is based upon: 6.1.1 The owner project requirements; 6.1.2 Clearly defined and enforceable levels of BECx; and 6.1.3 Minimum core competencies...

ASTM D3675-26 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
July 1, 2026 - ASTM International

5.1 This test method is intended for use when measuring surface flammability of flexible cellular materials exposed to fire. The test method provides a laboratory test procedure for measuring and comparing the surface flammability of materials when exposed to a prescribed level of radiant heat...

ASTM D4211-26 - Standard Guide for Fish Sampling
July 1, 2026 - ASTM International

1.1 This guide covers the use of lethal and non-lethal collection practices for fish. 1.1.1 Lethal practices include the use of rotenone and antimycin which are used to collect or eradicate fish; numerous chemicals have been used but presently only rotenone and antimycin are U.S. Environmental...

ASTM A390-06(2026) - Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
April 1, 2026 - ASTM International

This specification covers zinc-coated fence fabric intended for enclosure of poultry, or to prevent entry into special areas. It is available in three styles as: poultry netting; poultry-and-garden fence fabric; and chick fence fabric. The zinc used for the coating shall be any grade of zinc...

ASTM D4211-21(2026) - Standard Guide for Fish Sampling
May 1, 2026 - ASTM International

1.1 This guide covers the use of lethal and non-lethal collection practices for fish. 1.1.1 Lethal practices include the use of rotenone and antimycin which are used to collect or eradicate fish; numerous chemicals have been used but presently only rotenone and antimycin are U.S. Environmental...

ASTM F2840-26 - Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
March 1, 2026 - ASTM International

3.1 This specification provides designers and manufacturers of electric propulsion for light sport aircraft design references and criteria to use in designing and manufacturing EPUs. 3.2 Declaration of compliance is based on testing and documentation during the design, ground testing and flight...

ASTM E2518-19(2026) - Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)
January 1, 2026 - ASTM International

This specification covers the general requirements for the Type IV Cargo Bed Cover (CBC). The Type IV Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1095, 5 Ton MTV Trailer. The CBC...

ASTM F1004-25 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
December 1, 2025 - ASTM International

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and...

ASTM F1004-25e1 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
December 1, 2025 - ASTM International

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and...

ASTM D3045-18(2026) - Standard Practice for Heat Aging of Plastics Without Load
February 1, 2026 - ASTM International

4.1 The use of this practice presupposes that the failure criteria selected to evaluate materials (that is, the property or properties being measured as a function of exposure time) and the duration of the exposure can be shown to relate to the intended use of the materials. 4.2 Plastic materials...

ASTM D865-11(2025) - Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
July 1, 2025 - ASTM International

1.1 This test method covers a procedure to determine the deterioration induced by heating rubber specimens in individual test tube enclosures with circulating air. This isolation prevents cross contamination of compounds due to loss of volatile materials (for example, antioxidants) and their...

ASTM E2336-25 - Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
April 1, 2025 - ASTM International

5.1 These test methods are intended to evaluate the ability of the grease duct enclosure system to do the following: 5.1.1 Resist the effects of a standardized fire exposure, 5.1.2 Retain its integrity, or 5.1.3 Exhibit both properties dependent upon the type of test assembly involved during...

ASTM E2947-25 - Standard Guide for Building Enclosure Commissioning
February 15, 2025 - ASTM International

5.1 This guide provides recommendations for the enclosure commissioning process from its project planning through design, construction and occupancy and operation phases. This guide is intended for various building types. Although Practice E2813 defines two levels of enclosure...

ASTM D3656/D3656M-25 - Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns
November 1, 2025 - ASTM International

1.1 This specification covers the requirements for vinyl-coated glass yarn insect screening and louver cloth. 1.2 This specification is intended to assist ultimate users by designating the sizes and types of these products that are generally available in the industry. 1.3 This specification shows...

ASTM E2357-25 - Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
November 1, 2025 - ASTM International

1.1 This test method covers the determination of the air leakage rate of air barrier assemblies that are used in building enclosures. This procedure measures the air leakage of a representative air barrier assembly before and after exposure to specific conditioning cycles and then assigns a...

ASTM F3794-25 - Standard Practice for Multivariate Fit and Accommodation for Exoskeleton Manufacturers and Designers
November 1, 2025 - ASTM International

5.1 The U.S. exoskeleton marketplace currently lacks a consistent sizing structure and clear criteria for selecting sizes. This inconsistency likely stems from the absence of comprehensive national anthropometric data tailored to exoskeleton design applications. The significant variations in sizing...

ASTM E499/E499M-11(2025) - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
July 1, 2025 - ASTM International

6.1 Test Method A is frequently used to test large systems and complex piping installations that can be filled with a trace gas. Helium is normally used. The test method is used to locate leaks but cannot be used to quantify except for approximation. Care must be taken to provide sufficient...

ASTM F1134-15(2025) - Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
June 15, 2025 - ASTM International

This specification covers monitoring devices (monitors) for the automatic detection and signaling of low insulation resistance values in idle electrical motors or generators, or both. Monitors are intended for permanent installation in both existing or new panels and controller enclosures...

ASTM E2841-19(2025) - Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
August 1, 2025 - ASTM International

4.1 This guide is intended to provide building professionals with a methodology for conducting periodic condition assessments of building facades, for the purpose of determining if conditions exist in the subject facades that represent hazards to persons or property. It addresses the performance...

ASTM E162-25a - Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
June 1, 2025 - ASTM International

5.1 This test method provides a laboratory test procedure for measuring and comparing the surface flammability of materials when exposed to a prescribed level of radiant heat energy. It is intended for use in measurements of the surface flammability of materials exposed to fire. The test is...

Advertisement