loading
SMACNA ENERGY SYSTEMS - Energy Systems Analysis and Management Manual
January 1, 2014 - SMACNA
A description is not available for this item.
ASHRAE ENERGY EFFICIENCY - (90313) Energy Efficiency Guide for Existing Commercial Buildings: Technical Implementation; (90374) Energy Efficiency Guide for Existing Commercial Buildings: The Business Case for Building Owners and Managers
January 1, 2011 - ASHRAE

Preface This guide is the second in a series of planned Energy Efficient Guides for Existing Commercial Buildings (EEG-EB) developed by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) in collaboration with the American Institute of Architects (AIA), the...

SMACNA ENERGY SYSTEMS CD - ENERGY SYSTEMS ANALYSIS & MANAGEMENT MANUAL
SMACNA
A description is not available for this item.
ENERGY REORGANIZATION ACT - ENERGY REORGANIZATION ACT OF 1974
GPO
A description is not available for this item.
ASHRAE MODELING & ENERGY - Modeling and Energy Consumption with Parallel and Series VAV Terminal Units with ECM and PSC Motors
January 1, 2014 - ASHRAE

Introduction Since fan-powered variable-air-volume (VAV) terminal units were introduced to the marketplace, proponents of both parallel and series types have argued about which provides a system with the highest energy efficiency.* ASHRAE/AHRI research was undertaken to define the operation...

JIS ENERGY SAVING HDBK - JIS Energy Saving/New Energy Handbook
January 1, 2014 - JSA
A description is not available for this item.
ASTM E772-15(2026) - Standard Terminology of Solar Energy Conversion
June 1, 2026 - ASTM International

1.1 This terminology pertains to the conversion of solar energy into other forms of energy by various means, including thermal absorption (i.e., solar thermal) and the photovoltaic effect (i.e., photovoltaics). 1.2 This terminology also pertains to instrumentation used to measure...

ASTM F3830-26 - Standard Specification for Electrical Energy Storage Systems
June 15, 2026 - ASTM International

1.1 This specification covers requirements for the design, installation and qualification of rechargeable lithium batteries based electrical energy storage systems (EESS) on light sport category aircraft used for propulsion purposes. The manufacturer shall comply with all applicable...

ASTM G203-10(2026) - Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
June 1, 2026 - ASTM International

1.1 This guide covers and is intended for use in interpreting the friction forces recorded in reciprocating tribosystems. The guide applies to any reciprocating tribosystem, whether it is a wear or fretting test or an actual machine or device. 1.2 The energy dissipation guide was developed...

API REINVENTING ENERGY - REINVENTING ENERGY
API
A description is not available for this item.
ASTM D7313-20(2026) - Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
July 1, 2026 - ASTM International

1.1 This test method covers the determination of fracture energy (Gf) of asphalt mixtures using the disk-shaped compact tension geometry. The disk-shaped compact tension geometry is a circular specimen with a single edge notch loaded in tension. The fracture energy can be utilized as...

ASTM D3675-26 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
July 1, 2026 - ASTM International

5.1 This test method is intended for use when measuring surface flammability of flexible cellular materials exposed to fire. The test method provides a laboratory test procedure for measuring and comparing the surface flammability of materials when exposed to a prescribed level of radiant heat...

ASTM E957-03(2026) - Standard Terminology Relating to Geothermal Energy
June 1, 2026 - ASTM International
A description is not available for this item.
ASTM D7244-20(2026) - Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
June 1, 2026 - ASTM International

1.1 This test method covers the procedure for evaluating the relative cure of printed energy-cured (ultraviolet or electron beam) ink or coating by a mechanical solvent rub test using a motorized Crockmeter. 1.2 This test method is applicable to laboratory and production prints on any flat...

ASTM C1255-26 - Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
July 1, 2026 - ASTM International

1.1 This test method covers the energy dispersive X-ray fluorescence (EDXRF) spectrochemical analysis of trace levels of uranium and thorium in soils. Any sample matrix that differs from the general ground soil composition used for calibration (that is, fertilizer or a sample of mostly rock)...

ASTM D6110-26 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
July 1, 2026 - ASTM International

1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test...

ASTM C1254-26 - Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
July 1, 2026 - ASTM International

5.1 This test method is applicable to aqueous solutions of uranium mass concentration from 0.05?g/L to 20?g/L of solution as presented to the spectrometer. 5.2 Either wavelength-dispersive or energy-dispersive X-ray fluorescence systems may be used provided the software accompanying the...

ASTM E802-21(2026) - Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness
July 1, 2026 - ASTM International

4.1 Personnel Qualification-Personnel utilizing reference radiographs to this standard shall be qualified to perform radiographic interpretation in accordance with a nationally or internationally recognized NDT personnel qualification practice or standard and certified by the employer or certifying...

ASTM E1648-20(2026) - Standard Reference Radiographs for Examination of Aluminum Fusion Welds
July 1, 2026 - ASTM International

4.1 Personnel utilizing reference radiographs to this standard shall be qualified and authorized to perform radiographic interpretation in accordance with a nationally or internationally recognized NDT personnel qualification practice or standard such as ANSI/ASNT-CP-189, SNT-TC-1A, NAS?410, ISO...

Advertisement