loading
ASTM A564/A564M-25 - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
November 1, 2025 - ASTM International

This specification covers bars and shapes of age-hardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are included. These shapes may be produced by hot rolling, extruding, or forging. Type 631 and 632 stainless steels contain a...

ASTM E750-15(2025) - Standard Practice for Characterizing Acoustic Emission Instrumentation
September 1, 2025 - ASTM International

This practice deals with the testing and measurement of operating characteristics of acoustic emission (AE) electronic components or units. This practice is not intended for routine checks of acoustic emission instrumentation, but rather for periodic evaluation or in the event of a malfunction. The...

ASTM F3287-17(2025) - Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
October 1, 2025 - ASTM International

1.1 This method provides a nondestructive means to detect holes (leaks) in a variety of non-porous rigid and semi-rigid packages. 1.2 This test method detects package leaks by measuring the mass flow extracted from a package while the package is enclosed inside an evacuated test chamber. The test...

J2848/2_202303 - Tire Pressure Systems - Maintenance (ATIS) Type For Medium and Heavy Duty Highway Vehicles
March 1, 2023 - SAE International

This SAE Recommended Practice defines the system and component functions, measurement metrics, and testing methodologies for evaluating the functionality and performance of ground vehicle tire pressure maintenance (ATIS) systems (systems which automatically restore the inflation pressure to its...

The Music Producer’s Ultimate Guide to FL Studio 20
February 26, 2021 - PACKT

Leverage the power of FL Studio 20 to create and compose production-quality songs and develop professional music production skillKey Features* Leverage the power of FL Studio to create your own production-level music* Develop widely applicable music production skills and learn how to promote your...

ASTM E750-15(2020) - Standard Practice for Characterizing Acoustic Emission Instrumentation
June 1, 2020 - ASTM International

This practice deals with the testing and measurement of operating characteristics of acoustic emission (AE) electronic components or units. This practice is not intended for routine checks of acoustic emission instrumentation, but rather for periodic evaluation or in the event of a malfunction. The...

DS/ISO 21100 - Air cargo unit load devices – Performance requirements and test parameters
July 6, 2020 - DS

This document specifies the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices (ULD). This document is intended to provide a uniform technical reference for air cargo unit load devices approval. As a...

Raspberry Pi Computer Vision Programming
June 29, 2020 - PACKT

Perform a wide variety of computer vision tasks such as image processing and manipulation, feature and object detection, and image restoration to build real-life computer vision applications Key Features * Explore the potential of computer vision with Raspberry Pi and Python programming * Perform...

ISO 21100 - Air cargo unit load devices — Performance requirements and test parameters
June 1, 2020 - ISO

This document specifies the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices (ULD). This document is intended to provide a uniform technical reference for air cargo unit load devices approval. As a...

AMS5667P - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable
August 4, 2020 - SAE International

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.

AMS5745G - Steel, Corrosion and Heat-Resistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Equalized and Over-Tempered
May 11, 2020 - SAE International

This specification covers a corrosion and heat resistant steel in the form of bars, forgings, and forging stock.

AMS5743K - Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered
May 11, 2020 - SAE International

This specification covers a corrosion and heat-resistant steel in the form of bars, forgings, and forging stock.

ASTM D2889-95(2019) - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
December 1, 2019 - ASTM International

1.1 This test method describes the calculation of true vapor pressures of petroleum distillate fuels for which distillation data may be obtained in accordance with Test Method D86 without reaching a decomposition point prior to obtaining 90 % by volume distilled. 1.2 The test method may be used to...

ASTM A564/A564M-19a - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
September 1, 2019 - ASTM International

This specification covers bars and shapes of age-hardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are included. These shapes may be produced by hot rolling, extruding, or forging. Type 631 and 632 stainless steels contain a...

ITU-T G.671 - Transmission characteristics of optical components and subsystems
August 1, 2019 - ITU-T

The object of this Recommendation is to identify the transmission-related parameters for each of the components listed below and define the values of such parameters specifiable for each of the most relevant system applications. Where applicable, IEC definitions will be used. Applicable systems are...

ASTM A564/A564M-19 - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
May 1, 2019 - ASTM International

This specification covers bars and shapes of age-hardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are included. These shapes may be produced by hot rolling, extruding, or forging. Type 631 and 632 stainless steels contain a...

Optical Wireless Communications: System and Channel Modelling with MATLAB®
May 10, 2019 - CRC

The 2nd Edition of Optical Wireless Communications: System and Channel Modelling with MATLAB® with additional new materials, is a self-contained volume that provides a concise and comprehensive coverage of the theory and technology of optical wireless communication systems (OWC). The delivery...

IEEE 1653.6 - Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities
October 23, 2018 - IEEE

This document includes recommended practices for grounding of dc equipment enclosures installed in dc traction power distribution facilities. DC distribution facilities may include, but are not limited to, traction power substations, tie breaker stations, gap breaker stations, section huts,...

Conceptual Density Functional Theory and Its Application in the Chemical Domain
June 20, 2018 - CRC

In this book, new developments based on conceptual density functional theory (CDFT) and its applications in chemistry are discussed. It also includes discussion of some applications in corrosion and conductivity and synthesis studies based on CDFT. The electronic structure principles-such as the...

ITU-T G.993.2 - Very high speed digital subscriber line transceivers 2 (VDSL2)
February 1, 2019 - ITU-T

This Recommendation is an enhancement to [ITU-T G.993.1] that supports transmission at a bidirectional net data rate (the sum of upstream and downstream rates) up to 200 Mbit/s on twisted pairs. This Recommendation is an access technology that exploits the existing infrastructure of copper wires...

Advertisement