1.1 This practice may be used for measuring, scoring, and improving the overall performance of detectors that alarm on traces of explosives on swabs or other sampled surfaces. These explosive trace detectors (ETDs) may be based on, but are not limited to, chemical detection...
4.1 Uses-This classification is intended for use by federal landholding agencies and DoD components in order to direct ECOP efforts. It is also intended for use by preparers and reviewers of environmental condition of property maps, explosives safety condition maps, and ECOP reports used to...
5.1 Inspection, repair, and construction of ASTs in petroleum service should follow at a minimum the requirements of API 650 and API 653. These standards describe methods for testing the weld quality and structural and hydraulic integrity of new or repaired ASTs. With increasing emphasis on...
5.1 Commercial trace detectors are used by first responders, security screeners, the military, and law enforcement to detect and identify explosive threats and drugs of interest quickly. These trace detectors typically operate by detecting chemical agents in residues and particles sampled...
5.1 Nitrogen dioxide plays an important role in photochemical smog-forming reactions and, in sufficient concentrations, is deleterious to health, agriculture, materials, and visibility. 5.2 In combustion processes, significant amounts of nitric oxide (NO) may be produced by combination of...
1.1 This practice provides information on apparatus, safety, pre-test preparation, and procedures for conducting field tests of polyethylene and crosslinked polyethylene pressure piping systems by filling with a liquid and applying pressure to determine if leaks exist in the system. 1.2 This...
1.1 This practice applies to all X-ray-based screening systems with tunnel apertures up to 1 m wide × 1 m high, whether they are conventional X-ray systems or explosives detection systems, that provide a projection or projection/scatter image. 1.2 This practice applies to X-ray systems used...
4.1 These practices should be used only to collect visible samples that are suspected biological agents and toxins and have been field screened as defined by the FBI-DHS-HHS/CDC Coordinated Document for explosive hazard, radiological hazard, and other acute chemical hazards. 4.2 These...
1.1 Purpose-The purpose of this guide shall be to provide fundamental safeguards for the storage, use, and handling of liquid rocket propellants to ensure the safety of workers involved as well as the public. 1.2 Goal-The functional goal of this guide shall be to reduce the explosive hazard...
5.1 This test method provides a means to determine various fire-test-response characteristics, including the time to sustained flaming and the heat release rate, of composites exposed to a prescribed initial test heat flux in the cone calorimeter apparatus, after they have been vandalized in a...
4.1 Whenever two dissimilar materials are contacted and separated, excess electrostatic charge (triboelectric charge) will be found on these materials if at least one of the materials is a good insulator. This excess charge gives rise to electric fields which can exert forces on other objects. If...
1.1 This practice covers general recommended design features and operating practices for shredder explosion protection in resource recovery plants and other refuse processing facilities. 1.2 Hammermills and other types of size reduction equipment (collectively termed shredders) are employed at many...
1.1 This test method covers the determination of the stability of gasoline in finished form only, under accelerated oxidation conditions. (Warning-This test method2 is not intended for determining the stability of gasoline components, particularly those with a high percentage of low boiling...
5.1 The distillation (volatility) characteristics of hydrocarbons and other liquids have an important effect on their safety and performance, especially in the case of fuels and solvents. The boiling range gives information on the composition, the properties, and the behavior of the fuel during...
5.1 This practice describes criteria for the analysis, identification, and classification of smokeless powders which can be used as an explosive for improvised explosive devices or as a propellant, such as for small arms ammunition and military ordnance. 5.2 This practice establishes...
1.1 These test methods cover the analysis of organic compounds in smokeless powders by gas chromatography-mass spectrometry (1-4)2 and Fourier transform infrared spectroscopy (FTIR) (1, 5). 1.2 These test methods are suited for analyzing samples comprised of visible grains (whole or partial) of...
1.1 This guide is intended to be used by facility owners, military commanders, security personnel, planners, specifiers, designers, and engineers in the selection and application of vehicle security barrier systems for entry control facilities (ECFs), access control points (ACPs), or other...
1.1 This guide covers the detection, collection, handling, and preservation of trace evidence in the laboratory. It is intended to assist forensic science practitioners in the selection and application of techniques based on the circumstances of each case. Although the bulk of the procedures and...
1.1 This practice is commonly used for periodic inspection and testing of welded steel gaseous spheres (bottles) with the acoustic emission (AE) method. AE is used in place of hydrostatic volumetric expansion testing. The periodic inspection and testing of bottles by AE testing is achieved without...
4.1 Hexavalent chromium salts are used extensively in metal finishing and plating applications, in anodizing aluminum, and in the manufacture of paints, dyes, explosives, and ceramics. Trivalent chromium salts are used as mordants in textile dyeing, in the ceramic and glass industry, in the...
Narrow Your Results