loading
J1121_201608 - Helical Compression and Extension Spring Terminology
August 2, 2016 - SAE International

The following recommended practice has been developed to assist engineers and designers in the preparation of specifications for the major types of helical compression and extension springs. It is restricted to a concise presentation of items which will promote an adequate...

JIS B 7738 - Calibration and verification of helical compression and extension springs testing machines
November 20, 2020 - JSA
A description is not available for this item.
DIN EN 13906-2 - Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs
September 1, 2013 - DIN

This European Standard specifies the calculation and design of cold and hot coiled helical extension springs made from round wire and bar with values according to Table 1, loaded in the direction of the spring axis and operating at normal ambient temperatures. NOTE In cases of...

JIS B 2708 - Cold formed helical extension springs
March 1, 1994 - JSA
A description is not available for this item.
DS/EN 13906-2 - Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs
July 11, 2013 - DS

This European Standard specifies the calculation and design of cold and hot coiled helical extension springs made from round wire and bar with values according to Table 1, loaded in the direction of the spring axis and operating at normal ambient temperatures. NOTE In cases of...

JIS B 2704-3 - Coil springs - Part 3: Expression of the specification on helical extension springs
October 20, 2009 - JSA

This Japanese Industrial Standard specifies the expression of the specification on helical extension springs (hereafter referred to as "springs"), such as of the material, configuration, spring characteristics and dimensions in accordance with JIS B 2704-1.

AS24586D - SPRING, HELICAL, EXTENSION FOR LOADS BELOW 30 LBF
May 21, 2021 - SAE International
A description is not available for this item.
DIN 2089-2 - Design of cold or hot formed helical extension springs
November 1, 1992 - DIN
A description is not available for this item.
ASTM D5992-96(2024) - Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
May 1, 2024 - ASTM International

5.1 This guide is intended to describe various methods for determining the dynamic properties of vulcanized rubber materials, and by extension, products utilizing such materials in applications such as springs, dampers, and flexible load-carrying devices, flexible power transmission...

AS13572A - Springs, Helical, Compression and Extension
August 12, 2014 - SAE International

This specification covers helical compression and extension springs, made from single wire or rod of either round or special cross-section (see 6.4 ).

AS24586C - SPRING, HELICAL, EXTENSION FOR LOADS BELOW 30 POUNDS
August 15, 2018 - SAE International
A description is not available for this item.
AS13572 - Springs, Helical, Compression and Extension
May 11, 2006 - SAE International

This specification covers helical compression and extension springs, made from single wire or rod of either round or special cross-section (see 6.4 ).

AS24586B - SPRING, HELICAL, EXTENSION: FOR LOADS BELOW 30 POUNDS
August 11, 2016 - SAE International
A description is not available for this item.
JIS B 2704-1 - Coil springs-Part 1: Basic calculation methods
March 20, 2018 - JSA

This Japanese Industrial Standard specifies the requirements for basic calculation methods for helical compression springs, helical extension springs and helical torsion springs (hereafter referred to as springs), which are for general use and made from metallic...

Advertisement