loading
A-A-55475 - FUSEHOLDER, EXTRACTOR POST
May 3, 2017 - NPFC

This commercial item description (CID) covers the general requirements for an extractor post fuseholder. Fuseholders covered by this CID are intended for commercial/industrial applications.

A-A-3022 - EXTRACTOR, TAP
NPFC
A description is not available for this item.
DESC-DWG-84191 - EXTRACTOR, ELECTRICAL CARD, METAL
May 10, 2014 - DOD

This drawing describes the requirements for a family of metal extractors intended to aid in removing circuit card assemblies or printed wiring assemblies from their installed positions.

DSCC-DWG-84191 - EXTRACTOR, ELECTRICAL CARD, METAL
August 30, 2002 - DOD

This drawing describes the requirements for a family of metal extractors intended to aid in removing circuit card assemblies or printed wiring assemblies from their installed positions.

A-A-59832 - EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
July 15, 2019 - NPFC

This commercial item description (CID) covers the general requirements for metal inserter-ejectors (hereafter referred to as extractors) that are mounted to circuit card assemblies (CCA) and are intended to be used to insert and initiate the removal of circuit card assemblies from their...

A-A-55499 - FUSEHOLDER, EXTRACTOR POST
NPFC
A description is not available for this item.
OO-E-990 - EXTRACTOR,LAUNDRY,COMMERCIAL
NPFC
A description is not available for this item.
MIL-F-48847 - FUSEHOLDER, EXTRACTOR TYPE
NPFC
A description is not available for this item.
A-A-385 - EXTRACTOR,COTTER PIN
NPFC
A description is not available for this item.
MIL-P-29228 - PILE EXTRACTOR, AIR OPERATED
NPFC
A description is not available for this item.
MS 25187 - EXTRACTOR, ELECTRONIC TUBE
NPFC
A description is not available for this item.
ASTM F619-14 - Standard Practice for Extraction of Medical Plastics
March 1, 2014 - ASTM International

1.1 This practice covers methods of extraction of medical plastics and may be applicable to other materials. This practice identifies a method for obtaining "extract liquid" for use in determining the biological response in preclinical testing. Further testing of the "extract liquid"...

ASTM F619-03(2008) - Standard Practice for Extraction of Medical Plastics
August 1, 2008 - ASTM International

1.1 This practice covers methods of extraction of medical plastics and may be applicable to other materials. This practice identifies a method for obtaining "extract liquid" for use in determining the biological response in preclinical testing. Further testing of the "extract liquid"...

A-A-55441 - WASHER-EXTRACTOR, COMMERCIAL FOR DECONTAMINATION OF PROTECTIVE EQUIPMENT AND CLOTHING
November 23, 2018 - NPFC

Description This document covers washer-extractors with capacities ranging from 35 pounds to 250 pounds dry weight of soiled items. Machines are electrically operated and microprocessor controlled, with single compartment, end loading, cylinders. Intended use Washer-extractors...

ASTM F619-03 - Standard Practice for Extraction of Medical Plastics
November 1, 2003 - ASTM International

1.1 This practice covers methods of extraction of medical plastics and may be applicable to other materials. This practice identifies a method for obtaining "extract liquid" for use in determining the biological response in preclinical testing. Further testing of the "extract liquid"...

ASTM F619-02 - Standard Practice for Extraction of Medical Plastics
April 10, 2002 - ASTM International

1.1 This practice covers methods of extraction of medical plastics and may be applicable to other materials. This practice identifies a method for obtaining "extract liquid" for use in determining the biological response in preclinical testing. Further testing of the "extract liquid"...

ASTM E2097 - Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
June 10, 2000 - ASTM

This guide covers procedures and test methods for process component qualification by the end user. The goal is to assess the safety impact of extractables from non-metallic process components used in contact with bioprocessing solutions. This encompasses the impact of extractables on...

ASTM F619 - Standard Practice for Extraction of Materials Used in Medical Devices
August 1, 2020 - ASTM

This practice covers methods of extraction of medical plastics and may be applicable to other materials. This practice identifies a method for obtaining "extract liquid" for use in determining the biological response in preclinical testing. Further testing of the "extract liquid" is...

ASTM D8372-21 - Standard Guide for Cannabis/Hemp Extract Vaporizers
January 15, 2021 - ASTM International

4.1 This guide is intended to educate new and experienced users of cannabis extract vaporizers on the various characteristics that can be available in cannabis extract vaporizers. 4.2 This guide will outline characteristics of cannabis extract vaporizers, which includes...

A-A-2972 - EXTRACTOR, ELECTRON TUBE (TONG TYPE)
June 7, 2000 - NPFC
A description is not available for this item.
Advertisement