PREFACE This chapter is one of a series which make up the manual, Guide for Inspection of Refinery Equipment. It is based on the accumulated knowledge and experience of engineers of the petroleum industry. All users are invited to submit suggested revisions to the director of the Division of...
1.1 This practice covers acoustic emission (AE) examination or monitoring of panel and plate-like composite structures made entirely of fiber/polymer composites. 1.2 The AE examination detects emission sources and locates the region(s) within the composite structure where the emission originated....
1.1 This standard provides guidance for inspection, maintenance and service for permanently installed indoor gymnasium equipment including ceiling suspended and wall mounted basketball backstops, ceiling suspended volleyball systems, gymnasium divider curtains, and wrestling mat lifting and...
5.1 Test Method D5430 is considered satisfactory for acceptance testing a commercial shipment since the method has been used extensively in the trade for grading of fabric and fabric acceptance determination. 5.2 The penalty points obtained in grading the same rolls or bolts of...
5.1 This guide identifies the responsibilities of the fiber, fabric, and clothing manufacturers, as well as the processor, the processor's chemical supplier, and the end user. 5.2 This guide describes the key components involved in an industrial laundry program for the care and maintenance...
1.1 This guide provides recommendations for home laundering of clothing that is flame resistant or arc rated. These recommendations address the home laundering process. Home laundering is an effective cleaning process for flame resistant or arc rated garments; follow all label care instructions. 1...
1.1 This test method covers the determination of the resistance of flexible low permeance vapor retarders for thermal insulation as classified in Specification C1136 to elevated temperature and humidity. Water vapor permeance measurement and visual inspection after exposure at elevated...
4.1 This practice is for use by designers and specifiers, regulatory agencies, owners, and inspection organizations who are involved in the rehabilitation of conduits through the use of a resin-impregnated fabric tube pulled-in-place through an existing conduit and secondarily...
4.1 This practice is for use by designers and specifiers, regulatory agencies, owners, and inspection organizations who are involved in the rehabilitation of conduits through the use of a resin-impregnated fabric tube pulled-in-place through an existing conduit and secondarily...
1.1 This test method describes performing load-controlled cyclic undrained triaxial tests to evaluate the cyclic response of saturated soils in either intact or reconstituted states. 1.2 The cyclic response of the soil is evaluated relative to a number of factors, including the magnitude and offset...
1.1 These test methods describe the use of a torsional apparatus for measuring the relative low temperature stiffening of flexible polymeric materials and fabrics coated therewith. A routine inspection and acceptance procedure, to be used as a pass-fail test at a specified...
1.1 This practice covers an approach for compressive testing thin damaged multidirectional polymer matrix composite laminates reinforced by high-modulus fibers using a sandwich long beam flexure specimen. It provides a test configuration in which the core does not constrain any protruding back side...
1.1 This practice establishes criteria for the Design, Manufacture, Installation, Operation, Maintenance, Inspection, Training, Auditing and Major Modification of commercial use Inflatable Amusement Devices. These devices are made of flexible fabric, inflated by one or more blowers,...
5.1 Shearography is commonly used during product process design and optimization, process control, after manufacture inspection, and in service inspection, and can be used to measure static and dynamic axial (tensile and compressive) strain, as well as shearing, Poisson, bending, and...
5.1 The mats shall be constructed to yield the values listed in Table 1 throughout the mat area under the conditions of the manufacturer's warranty. 5.2 Special requirements for the mats shall be subject to purchase agreements. Special requirements shall never reduce any of the basic requirements...
A Detailed Examination will apply to assets listed in Section 2 of NR/L3/CIV/006/3A where a Detailed Examination has been instructed by the RAM (B/C). NOTE 1: In the case of a new site or asset the RAM (B/C) might wish to propose a visual examination methodology via a permitted variation. This...
4.1 This practice is for use by designers and specifiers, regulatory agencies, owners, and inspection organizations who are involved in the rehabilitation of conduits through the use of a resin-impregnated fabric tube pulled-in-place through an existing conduit and secondarily...
Narrow Your Results