loading
ASTM D4807-26 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration
June 1, 2026 - ASTM International

1.1 This test method covers the determination of sediment in crude oils by membrane filtration. This test method has been validated for crude oils with sediments up to approximately 0.15?% by mass. 1.2 The accepted unit of measure for this test method is mass?%, but an equation to convert to...

ASTM E3469-26 - Standard Practice for Validating End-User Sterilizing Filtration of Pharmaceutical, Biopharmaceutical, and Biological Products
April 1, 2026 - ASTM International

1.1 Process validation of sterilizing filtration is required by industry standards and regulatory agencies to ensure that process fluid contact with the filter under actual worst-case process-use conditions (that is, time, flux, temperature, and pressure differential) do not adversely affect...

ASTM D4746-26 - Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
May 1, 2026 - ASTM International

1.1 This test method covers the determination of the quinoline-insoluble matter (QI) in tar and pitch by pressure filtration and gives results comparable to those obtained by Test Method D2318. 1.2 Since this test method is empirical, strict adherence to all details of the procedure is...

ASTM D8607-26 - Standard Test Method for Determination of Selected Elements in Aqueous Solutions by Single Quadrupole Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)
July 1, 2026 - ASTM International

1.1 This test method covers the determination of dissolved elements in ground waters, surface waters, and drinking water. It may also be used for determination of total recoverable or total element concentrations in these waters as well as wastewater, mine-impacted waters, and digested biosolids,...

ASTM D4520-18(2026) - Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
May 1, 2026 - ASTM International

1.1 This practice covers a procedure for conducting on-site core flood tests to determine the filtration and chemical treatment requirements for subsurface injection of water. 1.2 This practice applies to water disposal, secondary recovery, and enhanced oil recovery projects and is...

ASTM D1987-22(2026) - Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
June 1, 2026 - ASTM International

5.1 This test method is performance oriented for determining if, and to what degree, different liquids create biological activity on geotextile filters thereby reducing their flow capability. The use of the method is primarily oriented toward landfill leachates but can be performed with any liquid...

ASTM D4188-17(2025) - Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
December 1, 2025 - ASTM International

5.1 Pressure in-line coagulation-flocculation followed by filtration is an effective process to remove suspended and colloidal matter from water and waste water. 5.2 The effectiveness of this process is dependent on the type and concentration of the flocculant or coagulant, or both, the pH,...

ASTM D8193-26 - Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
May 15, 2026 - ASTM International

1.1 This test method covers the determination of total oil and grease (TOG) that can be extracted from water or wastewater samples by cyclohexane and measured by non-dispersive IR spectroscopy from 1370?cm-1 to 1380?cm-1. Treating the extract with Florisil to remove polar substances prior to the IR...

ASTM F2100-26 - Standard Specification for Medical Face Masks
February 15, 2026 - ASTM International

This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing for bacterial...

ASTM D8649-26 - Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
May 1, 2026 - ASTM International

1.1 This test method covers a method for analysis of selected pesticides in a water matrix by filtration followed with liquid chromatography/electrospray ionization tandem mass spectrometry analysis. The samples are prepared in 20?% methanol, filtered, and analyzed by liquid...

ASTM D7752-26 - Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
March 1, 2026 - ASTM International

5.1 Hydraulic fluid compatibility is important to hydraulic equipment users because a mixture of incompatible fluids may produce a substance that is markedly inferior to its constituents. Even in identical base stocks, the formation of a precipitate may occur as a result of additive interactions....

ASTM E2111-26 - Standard Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals using Quantitative Carriers (Quantitative Carrier Test-Tier 1)
March 1, 2026 - ASTM International

5.1 This test method is fully quantitative and it also avoids any loss of viable organisms through wash off, making it possible to produce statistically valid data using many fewer test and control carriers than other quantitative methods based on most probable numbers (MPN). 5.2 The design of the...

ASTM D6908-25 - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
September 1, 2025 - ASTM International

1.1 This practice covers the determination of the integrity of water filtration membrane elements and systems using air based tests (pressure decay and vacuum hold), soluble dye, continuous monitoring particulate light scatter techniques, and TOC monitoring tests for the purpose of rejecting...

ASTM E2217-12(2026) - Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
January 1, 2026 - ASTM International

1.1 The purpose of this practice is to provide design and construction guidelines for contamination controlled facilities used in the assembly and integration of aerospace hardware. The guidelines herein are intended to ensure that the facilities, when used properly, will meet the cleanliness...

ASTM D6855-25 - Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
November 1, 2025 - ASTM International

5.1 Turbidity is undesirable in drinking water treatment plant effluent waters, water for food and beverage processing, and for a large number of other water-dependent manufacturing processes. Removal is often accomplished by coagulation, settling, and filtration. Measurement of turbidity...

ASTM D7280-25 - Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
July 1, 2025 - ASTM International

1.1 This test method covers the determination of the quinoline-insoluble matter (QI) in tar and pitch using a stainless steel filtering crucible and a filtration membrane. 1.2 This test method was evaluated in round robin testing using materials in the range of zero to twenty quinoline...

ASTM D6698-25 - Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
September 15, 2025 - ASTM International

5.1 Turbidity is undesirable in drinking water, plant effluent waters, water for food and beverage processing, and for a large number of other water-dependent manufacturing processes. Removal of suspended matter is accomplished by coagulation, settling, and filtration. Measurement of...

ASTM E2871-25 - Standard Test Method for Determining Disinfectant Efficacy Against Biofilm Grown in the CDC Biofilm Reactor Using the Single Tube Method
September 1, 2025 - ASTM International

1.1 This test method specifies the operational parameters required to perform a quantitative liquid disinfectant efficacy test against bacterial biofilm. 1.2 The test method was optimized and validated for a Pseudomonas aeruginosa or Staphylococcus aureus biofilm grown in the CDC Biofilm Reactor...

ASTM D8625-25 - Standard Test Method for Chemical Assessment of Air Cleaning Technologies
August 1, 2025 - ASTM International

5.1 Historically, portable air cleaners were designed to remove airborne particles. More recently air cleaners have sought to also remove chemicals or airborne pathogens, or both. Concurrent with market development, there have been a range of test methods created to examine the removal or...

ASTM D8625-25e1 - Standard Test Method for Chemical Assessment of Air Cleaning Technologies
August 1, 2025 - ASTM International

5.1 Historically, portable air cleaners were designed to remove airborne particles. More recently air cleaners have sought to also remove chemicals or airborne pathogens, or both. Concurrent with market development, there have been a range of test methods created to examine the removal or...

Advertisement