This specification covers austenitic stainless steels in the annealed and normally required cold-worked conditions. They shall be formed in different shapes such as sheets, strips, plates and flat bars. The steels shall adhere to specified chemical composition requirements. Mechanical...
This specification covers austenitic stainless steels in the annealed and normally required cold-worked conditions. They shall be formed in different shapes such as sheets, strips, plates and flat bars. The steels shall adhere to specified chemical composition requirements. Mechanical...
This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, flat rolled products, and tubing containing nominally 54.5 % to 57.0 % nickel and used for the manufacture of medical devices and surgical implants. The...
5.1 This test method may be used for material development, characterization, design data generation, and quality control purposes. 5.2 This test method is specifically appropriate for determining the modulus of advanced ceramics that are elastic, homogeneous, and isotropic (1). 5.3 This test method...
This part of this European Standard specifies the nominal dimensions, tolerances on dimensions and shapes of hot rolled steel flat bars springs with three different types of profiles (A, B and C.). Formulas for the calculation the moment of inertia are specified in Appendix A. This...
This Part of this standard specifies the nominal dimensions and the tolerances on dimensions and shapes of hot rolled steel flat bars for springs with three different types of profiles (A, B, and C). Formulas for calculation the moment of inertia are specified in annex A. This...
1.1 These test methods cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided,...
This specification covers a group of common requirements that shall apply to carbon, alloy, and stainless steel fasteners or fastener materials, or both. These materials are intended for use at any temperature from cryogenic to the creep range. Requirements for the melting process and quality...
This specification covers the standard requirements for wrought low-carbon iron having a carbon content of 0.015% or less with the remainder of the analysis being substantially iron. These alloys are not electrical steels such as are described in Specifications A 726 and A 840 but are instead...
This document specifies the nominal dimensions and the tolerances on dimensions and shape of hotrolled steel flat bars and steel wide flats for general purposes. This document is not applicable to spring leaves, see EN 10092-1.
1.1 This specification covers hot-wrought steel bars to be used for the manufacture of general-purpose springs such as coil, torsion, and leaf. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units...
This document specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes. This document is not applicable to spring leaves, see EN 10092-1.
This specification covers a group of common requirements that shall apply to carbon, alloy, and stainless steel fasteners or fastener materials, or both. These materials are intended for use at any temperature from cryogenic to the creep range. Requirements for the melting process and quality...
This specification covers nickel-chromium-iron
This specification covers austenitic stainless steels in the annealed and normally required cold-worked conditions. They shall be formed in different shapes such as sheets, strips, plates and flat bars. The steels shall adhere to specified chemical composition requirements. Mechanical...
1.1 This specification covers wrought alloy UNS N06333 in the form of hot-finished and cold-finished bars and flats intended for heat resisting applications and general corrosive service. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in...
ESDU 09014 presents data on stress concentrations that occur in flat bars of strips when they are loaded in tension or bending. The various geometries for which data are presented include strips containing central or off-set circular holes, elliptical holes, slots, U-shaped edge...
Narrow Your Results