loading
ASTM F3841-26 - Standard Specification for Integration for Light Sport Gyroplane
May 1, 2026 - ASTM International

1.1 This speci?cation covers minimum requirements for Gyroplane, within the scope of Specification F3851?-?26 Specification for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 These requirements apply to gyroplanes having the following basic features: 1...

ASTM F2045-00(2025) - Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
June 15, 2025 - ASTM International

This specification covers the requirements for direct and indirect reading sight liquid level indicators for general applications. General applications for indirect reading sight glasses are water and fuel service at working pressures 2.07 MPa (300 lb/in.2) and below, temperatures of 149°C (300°F)...

ASTM G194-25 - Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
July 1, 2025 - ASTM International

5.1 Rolling friction like sliding friction depends upon many factors. It is a system effect that involves the nature of the specimen and the rolling surface. The sliding friction force (F) is usually considered to be the sum of forces arising from deformations of surface features (Fs), from...

ASTM D891-25 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
May 1, 2025 - ASTM International

4.1 Specific gravity, apparent, may be used as a qualitative test in establishing the identity of a chemical. It may be used to calculate the volume occupied by a product whose weight is known, or to calculate the weight of a product from its volume. It may be used to determine the composition of...

ASTM F3006-25 - Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
May 1, 2025 - ASTM International

1.1 This specification covers the destructive ball drop testing of laminated flat glass products intended for use in architectural glazing applications. 1.2 This specification is intended for use as an in-plant quality control test to evaluate the impact performance of laminated flat glass when a 2...

ASTM D139-24 - Standard Test Method for Float Test for Asphalt Materials
June 1, 2024 - ASTM International

1.1 This test method covers the float test for asphalt materials. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 Warning-Mercury has been designated by EPA and many state agencies as a hazardous material that...

ASTM C322-09(2024) - Standard Practice for Sampling Ceramic Whiteware Clays
December 1, 2024 - ASTM International

This practice covers procedures for sampling bulk and bagged ceramic whiteware clays. For bulk shipment consisting lumps, samples shall be taken from different parts of the rail car or truck during unloading. Sampling of hopper car or hopper truck shipments is to be done during unloading of the car...

ASTM F3007-24 - Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
October 1, 2024 - ASTM International

1.1 This test method covers the destructive ball drop testing of laminated flat glass products intended for use in architectural glazing applications. 1.2 This test method is intended for use as an in-plant quality control test to evaluate the impact performance of laminated flat glass when a 2.3...

ASTM D891-24 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
August 1, 2024 - ASTM International

4.1 Specific gravity, apparent, may be used as a qualitative test in establishing the identity of a chemical. It may be used to calculate the volume occupied by a product whose weight is known, or to calculate the weight of a product from its volume. It may be used to determine the composition of...

ASTM D139-23 - Standard Test Method for Float Test for Asphalt Materials
December 1, 2023 - ASTM International

1.1 This test method covers the float test for asphalt materials. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 Warning-Mercury has been designated by EPA and many state agencies as a hazardous material that...

ASTM F2044-09(2024) - Standard Specification for Liquid Level Indicating Equipment, Electrical
May 1, 2024 - ASTM International

This specification covers the requirements for electrical liquid level indicating equipment for shipboard low pressure and high pressure tanks containing freshwater, feed water, potable water, seawater, wastewater, diesel fuel, lubricating oil, contaminated oil, refrigerants, JP fuels, and various...

ASTM D3415-98(2024) - Standard Practice for Identification of Waterborne Oils
April 1, 2024 - ASTM International

1.1 This practice covers the broad concepts of sampling and analyzing waterborne oils for identification and comparison with suspected source oils. Detailed procedures are referenced in this practice. A general approach is given to aid the investigator in planning a program to solve the problem of...

ASTM D4131-19(2024) - Standard Practice for Sampling Fish with Rotenone
April 1, 2024 - ASTM International

1.1 This practice covers determination of the quantitative and qualitative species composition of fish in a specified area. The successful use of this technique is dependent on: (1) preventing fish from escaping the sample area and (2) retrieving all affected fish, which may take up to three days....

ASTM F2374-24 - Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
May 15, 2024 - ASTM International

1.1 This practice establishes criteria for the Design, Manufacture, Installation, Operation, Maintenance, Inspection, Training, Auditing and Major Modification of commercial use Inflatable Amusement Devices. These devices are made of flexible fabric, inflated by one or more blowers, and rely upon...

ASTM D579/D579M-24 - Standard Practice for Greige Woven Glass Fabrics
January 1, 2024 - ASTM International

This specification covers the general and physical requirements for greige fabrics woven from "E" electrical glass fiber yarns. The yarn shall be a continuous filament, free of any free alkali metal salts, such as soda or potash, and foreign particles, dirt, and other impurities. The fabric shall...

ASTM F3331-18(2023) - Standard Practice for Aircraft Water Loads
September 1, 2023 - ASTM International

4.1 This practice provides one means for determining the aeroplane structural loads for either dual floats or single hulls when taxiing on, taking off from, or landing on water. This practice satisfies the water loads requirements set forth in the Design Loads and Conditions Specification...

ASTM C123/C123M-23 - Standard Test Method for Lightweight Particles in Aggregate
December 15, 2023 - ASTM International

1.1 This test method covers the determination of the percentage of lightweight particles in aggregate by means of sink-float separation in a heavy liquid of suitable specific gravity. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The...

ASTM C1279-23 - Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
November 1, 2023 - ASTM International

1.1 This test method covers the determination of edge stresses and surface stresses in annealed, heat-strengthened, and fully tempered flat glass products. 1.2 This test method is non-destructive. 1.3 This test method uses transmitted light and is, therefore, applicable to light-transmitting...

ASTM D854-23 - Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method
November 1, 2023 - ASTM International

1.1 These test methods cover the determination of the specific gravity of soil solids that pass the 3/8-in. (9.5-mm) or smaller sieve by means of the water displacement method. When the total sample contains larger particles, it is separated into a coarser and finer portion using a 3/8-in. (9.5-mm)...

ASTM E2927-23 - Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
November 15, 2023 - ASTM International

1.1 This test method covers a procedure for the quantitative elemental analysis of the following seventeen elements: lithium (Li), magnesium (Mg), aluminum (Al), potassium (K), calcium (Ca), iron (Fe), titanium (Ti), manganese (Mn), rubidium (Rb), strontium (Sr), zirconium (Zr), barium (Ba),...

Advertisement