loading
PCMCIA SYSTEM - PCMCIA SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
IEEE INFORMATION - INFORMATION GRAPHICS: A COMPRHENSIVE ILLUSTRATED REFERENCE
IEEE
A description is not available for this item.
A-A-60000 - STRIPPER, FLOOR
May 14, 2019 - NPFC

This commercial item description (CID) covers a concentrated floor stripper compound, that removes water emulsion floor finish and floor wax from impermeable floor surfaces.

MIL-PRF-32638 - Floor Systems
November 7, 2019 - NPFC

This specification covers floor systems for use on Army vehicles.

ASME A112.21.1 - FLOOR DRAINS
January 1, 1968 - ASME

Development of standards for floor drains including floor, area, adjustable floor and trench drains which are used inside of, or outside and immediately adjacent to, building structures other than residential. This standard covers: a. Definitions b. Nomenclature c. Outlet -...

IPC-2541 - Generic Requirements for Electronics Manufacturing Shop-Floor Equipment Communication Messages (CAMX)
October 1, 2001 - IPC

The IPC-2541 standard defines an XML encoding schema to facilitate plug-and-play characteristics in a factory's shop-floor information system. This standard describes the generic event message content, and should be used together with the IPC-2540 series sectional documents,...

GMKOREA EDS-M-6228 - FLOOR MAT
September 1, 2010 - GMKOREA

Introduction Note: Nothing in this standard supersedes applicable laws and regulations. Note: In the event of conflict between the Korean and English language, the Korean language shall take precedence. Purpose. This specification specifies the requirement of basic property for patterns and...

A-A-54691 - LIGHT, FLOOR
June 25, 1992 - NPFC

The General Services Administration has authorized the use of this Commercial Item Description as a replacement for W-L-316B which is cancelled. This Commercial Item Description covers a portable, floor standing operating and examining light, capable of accommodating a standard incandescent...

ASTM C410-10 - Standard Specification for Industrial Floor Brick
August 1, 2010 - ASTM International

1.1 This specification covers brick made from clay or shale or mixtures thereof and are suitable for surfacing industrial floors. Ceramic shapes known as quarry tile are not covered by this specification. Four types of industrial floor brick are covered (Note 1): 1.1.1 Type T-For use...

ASTM C410-60(2003) - Standard Specification for Industrial Floor Brick
June 10, 2003 - ASTM International

1.1 This specification covers brick made from clay or shale or mixtures thereof and are suitable for surfacing industrial floors. Ceramic shapes known as quarry tile are not covered by this specification. Four types of industrial floor brick are covered (Note 1): 1.1.1 Type T-For use...

ASTM C410-08 - Standard Specification for Industrial Floor Brick
June 1, 2008 - ASTM International

1.1 This specification covers brick made from clay or shale or mixtures thereof and are suitable for surfacing industrial floors. Ceramic shapes known as quarry tile are not covered by this specification. Four types of industrial floor brick are covered (Note 1): 1.1.1 Type T-For use...

ASTM D5438-23 - Standard Practice for Collection of Floor Dust for Chemical Analysis
September 1, 2023 - ASTM International

1.1 This practice covers a procedure for the collection of a sample of dust from carpets and bare floors that can be analyzed for inorganic metals such as lead and organic compounds such as pesticides and other semi-volatile organic compounds (SVOCs). 1.2 This practice is applicable to a...

DEF STAN 79-11 - Polish, Floor (Wax Paste)
February 10, 2006 - MODUK

This Defence Standard specifies requirements for a paste floor polish of the wax solvent type for use on linoleum and wood. It is not suitable for use on concrete-mastic based floors and PVC based floors.

ASTM D5438-17 - Standard Practice for Collection of Floor Dust for Chemical Analysis
March 1, 2017 - ASTM International

1.1 This practice covers a procedure for the collection of a sample of dust from carpets and bare floors that can be analyzed for lead, pesticides, or other chemical compounds and elements. 1.2 This practice is applicable to a variety of carpeted and bare floor surfaces. It has been...

GMW14722 - Elastomeric Floor Mats
November 1, 2017 - GMW

Material Description. This standard describes elastomeric materials that are suitable for floor mat applications. Testing shall be performed on production intent parts. The performance tests can be applied as well to floor mats made of thermoplastic elastomers (TPE), the material...

UL 561 - Floor-Finishing Machines
October 31, 2011 - ULSE

1.1 These requirements cover electrically powered floor-finishing machines to be used in accordance with the National Electrical Code, NFPA 70. This product category includes the following: a floor polisher, floor scrubber, floor sander, floor scraper, tile...

ASTM D5438-11 - Standard Practice for Collection of Floor Dust for Chemical Analysis
August 15, 2011 - ASTM International

1.1 This practice covers a procedure for the collection of a sample of dust from carpets and bare floors that can be analyzed for lead, pesticides, or other chemical compounds and elements. 1.2 This practice is applicable to a variety of carpeted and bare floor surfaces. It has been...

ASME A112.6.3 - Floor and Trench Drains
March 4, 2019 - ASME

This Standard covers floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, building structures. This Standard specifies design requirements, definitions, nomenclature, outlet types and connections, grate-opening areas,...

ISO 14486 - Laminate floor coverings - Specification
June 1, 2012 - ISO

This International Standard specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows...

ASTM D5438-05 - Standard Practice for Collection of Floor Dust for Chemical Analysis
March 1, 2005 - ASTM International

1.1 This practice covers a procedure for the collection of a sample of dust from carpets and bare floors that can be analyzed for lead, pesticides, or other chemical compounds and elements. 1.2 This practice is applicable to a variety of carpeted and bare floor surfaces. It has been...

Advertisement