loading
ASTM F3191-26 - Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
May 15, 2026 - ASTM International

1.1 This practice covers the determination of whether or not a substrate surface, in lieu of written instruction from a product manufacturer, is considered porous or non-porous prior to the installation of resilient flooring materials. 1.2 Although carpet tiles, carpet, wood flooring,...

ASTM F2471-26 - Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
June 1, 2026 - ASTM International

1.1 This practice covers the installation and preparation of the thick poured lightweight cellular concrete underlayments over wood structural panel subfloors in commercial structures or over concrete floors in commercial structures and the preparation of the thick poured lightweight cellular...

ASTM F2199-26 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
August 1, 2026 - ASTM International

4.1 The final appearance of an installed floor depends upon several factors. These include but are not limited to size and squareness in the case of tiles/planks, the quality of joint cut, the quality and preparation of the subfloor and the skill of the installer. Long term appearance of the...

ASTM E1317-26a - Standard Test Method for Flammability of Surface Finishes
June 1, 2026 - ASTM International

5.1 This test method provides a means for evaluation of the flammable performance of surface finish materials. 5.2 A specimen of the surface finish of concern is mounted on the support material contemplated for use and subjected to a controlled significant radiant-flux exposure. 5.3 All specimens...

ASTM E1317-26 - Standard Test Method for Flammability of Surface Finishes
May 15, 2026 - ASTM International

5.1 This test method provides a means for evaluation of the flammable performance of surface finish materials. 5.2 A specimen of the surface finish of concern is mounted on the support material contemplated for use and subjected to a controlled significant radiant-flux exposure. 5.3 All specimens...

ASTM F1482-25 - Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
December 1, 2025 - ASTM International

1.1 This practice includes recommendations for the installation of panel type underlayments including wood-based, fiber-reinforced gypsum and fiber-cement panel underlayment/subfloor assemblies upon which resilient flooring may be installed. 1.2 The structural integrity of subfloor...

ASTM F150-25 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
November 15, 2025 - ASTM International

1.1 This test method covers the determination of electrical conductance or resistance of resilient flooring either in tile or sheet form, for applications such as hospitals, computer rooms, clean rooms, access flooring, munition plants, or any other environment concerning...

ASTM D8089-17(2026) - Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
January 1, 2026 - ASTM International

4.1 The final appearance of an installed floor depends upon several factors. These include but are not limited to the manufacture of the flooring material, the preparation of the subfloor and the skill of the installer. This practice is used to measure the ability of the adhesive to retain...

ASTM F3261-25a - Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
September 1, 2025 - ASTM International

1.1 This specification covers resilient flooring, typically in tile or plank format, or both, that are surface decorated or printed and protected by a clear wear layer. Products where the print or surface decoration provide a measure of surface protection can be counted as part of the total...

ASTM F3781-25 - Standard Test Method for Measurement of the Fracture Resistance of a Modular Resilient Flooring's Profiled Edge(s) to an Applied Vertical Force
November 1, 2025 - ASTM International

4.1 Modular flooring having profiled edges, installed as a floating floor can provide a quick and easy installation system. The product is held together by the interlocking profiled edges. If the profiled edges are too brittle, over flexed, etc. they can be susceptible to fracture, which can...

ASTM F1514-19(2025) - Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
August 1, 2025 - ASTM International

3.1 Resilient floor covering is made by fusing polymer materials under heat or pressure, or both, in various manufacturing and decorating processes. The polymer material may be compounded with plasticizers, stabilizers, fillers, and other ingredients for processability and product performance...

ASTM E648-25a - Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
December 1, 2025 - ASTM International

5.1 This fire test response standard is designed to provide a basis for estimating one aspect of the fire exposure behavior of a floor-covering system installed in a building corridor. The test environment is intended to simulate conditions that have been observed and defined in full scale corridor...

ASTM A786/A786M-15(2025) - Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
September 1, 2025 - ASTM International

1.1 This specification covers carbon, low-alloy, high-strength low-alloy, and alloy steel hot-rolled floor plates for flooring, stairways, transportation equipment, and general structural purposes. While it is generally provided in the as-rolled condition, floor plate also may be provided in...

ASTM F3261-25 - Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
May 1, 2025 - ASTM International

1.1 This specification covers resilient flooring, typically in tiles or planks format, or both, that are surface decorated or printed and protected by a clear wear layer. 1.2 This type of floor covering utilizes a polymeric rigid core as part of the product structure. 1.3 This type of floor...

ASTM D2047-25 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
May 1, 2025 - ASTM International

4.1 Test Method D2047 establishes a compliance criterion relating static coefficient of friction measurements of flooring surfaces with human locomotion safety. The compliance criterion is based on extensive experiential data from residential, commercial, industrial and institutional walkway...

ASTM F1066-25 - Standard Specification for Vinyl Composition Floor Tile
June 15, 2025 - ASTM International

1.1 This specification covers vinyl composition tile (VCT) with either smooth or embossed surfaces for flooring application. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided...

ASTM F1700-25 - Standard Specification for Solid Vinyl Floor in Modular Format such as Tile(s) or Plank(s)
July 1, 2025 - ASTM International

1.1 This specification covers solid vinyl2 flooring products in modular format such as tile(s) and plank(s) that are monolithic, surface-decorated or printed, and protected by a clear wear layer. 1.2 This type of floor covering is intended for use in commercial, light commercial, and...

ASTM E648-25 - Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
June 1, 2025 - ASTM International

5.1 This fire test response standard is designed to provide a basis for estimating one aspect of the fire exposure behavior of a floor-covering system installed in a building corridor. The test environment is intended to simulate conditions that have been observed and defined in full scale corridor...

ASTM F137-08(2024) - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
November 1, 2024 - ASTM International

1.1 This test method covers the determination of the flexibility of resilient flooring materials by means of cylindrical mandrel apparatus. It is especially applicable to sheet goods and some tiles. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in...

ASTM F2873-24 - Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
November 1, 2024 - ASTM International

1.1 This practice covers the installation of self-leveling underlayments, which may include a priming system, over solid wood, wood structural panel subfloors, over concrete, and over certain solidly bonded existing flooring systems such as epoxy floors, ceramic and natural stone tiles,...

Advertisement