Part 3 of this European Standard specifies the requirements and tests for the construction, performance, safety and conformity of flow computers (FCs) used to meet the metrological and technical requirements of a high accuracy volume conversion device. They are used to determine...
Part 3 of this European Standard specifies the requirements and tests for the construction, performance, safety and conformity of flow computers (FCs) used to meet the metrological and technical requirements of a high accuracy volume conversion device. They are used to determine...
5.1 PN Junction Diode-The steady-state photocurrent of a simple p-n junction diode is a directly measurable quantity that can be directly related to device response over a wide range of ionizing radiation. For more complex devices, the junction photocurrent may not be directly related to device...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
1.1 This practice covers the heat flow calibration of differential scanning calorimeters over the temperature range from?-130?°C to ?+800?°C. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 Computer or...
5.1 The delta octane number (?O.N.) measure can quantify the difference of in-line blended spark-ignition engine fuel or process stream material octane number to a desired octane number to aid in optimizing control of blender facilities or refinery process units. 5.2 The ?O.N. measure, summed with...
5.1 The delta octane number (?O.N.) measure can quantify the difference of in-line blended spark-ignition engine fuel or process stream material octane number to a desired octane number to aid in optimizing control of blender facilities or refinery process units. 5.2 The ?O.N. measure, summed with...
1.1 Applicability of the ESC Process-This practice covers a process for expedited site characterization (ESC) of hazardous waste contaminated sites2 to identify vadose zone, groundwater and other relevant contaminant migration pathways and determine the distribution, concentration, and fate of...
5.1 To maintain the integrity of potentially vulnerable information systems while the vessel is at sea or in port, strategies and procedures can be used by every company, organization, and ship. Mitigating potential cyberattack events will allow for a better economic environment through secure...
Narrow Your Results