loading
NSF INSTALLATION MANUAL - Installation Manual for Food Service Equipment
July 1, 1968 - NSF
A description is not available for this item.
TEMA FLOW INDUCED - Flow Induced Vibration Analysis Software (FIV)
TEMA
A description is not available for this item.
AWWA METERS SET - AWWA METERS SET
AWWA
A description is not available for this item.
ASTM D8114-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM D8226-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856?kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM E2459-24 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
October 1, 2024 - ASTM International

1.1 This guide is intended to provide a simple and consistent procedure for the in-situ field measurement of in-duct sound pressure levels in large low pressure industrial air ducts, such as for gas turbines or fans, where considerations such as flow velocity, turbulence or temperature...

ASTM C687-24 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
September 1, 2024 - ASTM International

4.1 The thermal resistance, R, of an insulation is used to describe its thermal performance. 4.2 The thermal resistance of an insulation is related to the density and thickness of the insulation. It is desirable to obtain test data on thermal resistances at thicknesses and densities related to the...

ASTM C1043-24 - Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
March 1, 2024 - ASTM International

4.1 This practice describes the design of a guarded hot plate with circular line-heat sources and provides guidance in determining the mean temperature of the meter plate. It provides information and calculation procedures for: (1) control of edge heat loss or gain (Annex A1); (2) location...

ASTM C1363-24 - Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
March 1, 2024 - ASTM International

5.1 A need exists for accurate data on heat transfer through insulated structures at representative test conditions. The data are needed to judge compliance with specifications and regulations, for design guidance, for research evaluations of the effect of changes in materials or constructions, and...

ASTM D7512-09(2023) - Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
December 15, 2023 - ASTM International

1.1 This guide covers the equipment and basic procedures for installation, operation, and calibration of optical equipment as a surrogate for the continuous determination of suspended-sediment concentration (SSC) in open channel flow. 1.2 This guide emphasizes general principles for...

ASTM D7663-12(2024) - Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
June 1, 2024 - ASTM International

5.1 Soil-gas sampling results can be dependent on numerous factors both within and outside the control of the sampling personnel. Key variables are identified and briefly discussed below. Please see the documents listed in the Bibliography for more detailed information on the effect of various...

ASTM C1130-24 - Standard Practice for Calibration of Thin Heat Flux Transducers
March 15, 2024 - ASTM International

1.1 This practice, in conjunction with either Test Method C177, C518, C1114, or C1363, establishes procedures for the calibration of heat flux transducers that are dimensionally thin in comparison to their planar dimensions. 1.1.1 The thickness of the heat flux transducer shall be less than 30?% of...

ASTM D8114-23a - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
October 1, 2023 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

API TR 2578 - Flow Conditioner Installation and Effects on Turbine Meters
October 1, 2017 - API

API MPMS Chapter 5.3 and parts of API MPMS Chapter 6 cover the installation requirements and performance characteristics of turbine meters in liquid hydrocarbon service. This research work provides data that should be considered for future incorporation into these standards. Phase I...

ASTM D8114-23 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
July 1, 2023 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

JIS ELEC INSTALLATION II - JIS Electrical Installation & Apparatus II Handbook
January 1, 2019 - JSA
A description is not available for this item.
JIS ELEC INSTALLATION I - JIS Electrical Installation & Apparatus I Handbook
January 1, 2019 - JSA
A description is not available for this item.
JIS ELEC INSTALLATION III - JIS Electrical Installation & Apparatus III Handbook
January 1, 2019 - JSA
A description is not available for this item.
ASTM D8114-22a - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
September 1, 2022 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

ISO 22192 - Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system
January 1, 2021 - ISO

This document specifies procedures and requirements for the transfer of bunkers to vessels by bunker tankers using the Coriolis mass flow meter (MFM) system. It encompasses the process leading to the approval of the MFM system as installed on bunker tankers and post-approval bunkering...

Advertisement