loading
TEMA FLOW INDUCED - Flow Induced Vibration Analysis Software (FIV)
TEMA
A description is not available for this item.
AWWA METERS SET - AWWA METERS SET
AWWA
A description is not available for this item.
ASTM E1530-25 - Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique
January 1, 2025 - ASTM International

5.1 This test method describes a procedure to measure and compare the thermal resistance properties of specimens (less than 25 mm in thickness) under controlled conditions.

ASTM C1667-15(2023) - Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
November 1, 2023 - ASTM International

5.1 Heat flow meter apparatus are being used to measure the center-of-panel portion of a vacuum insulation panel, which typically has a very high value of thermal resistivity (that is, equal to or greater than 90 m-K/W). As described in Specification C1484, the center-of-panel thermal...

ASTM C1919-22 - Standard Practice for Measurement of the Steady-State Thermal Transmission Properties of Small Specimens Using the Heat Flow Meter Apparatus
December 1, 2022 - ASTM International

1.1 This practice covers the measurement of steady state thermal transmission properties of the small flat slab thermal insulation specimen using a heat-flow-meter apparatus. 1.2 This practice provides a supplemental procedure for use in conjunction with Test Method C518 for testing a...

DS/ISO 21562 - Ships and marine technology – Bunker fuel mass flow meters on receiving vessel – Requirements
July 27, 2020 - DS

This document specifies requirements for Coriolis mass flow meter (MFM) systems installed on and used by vessels for the accurate measurement of bunker fuels received. It defines metrology and security requirements as well as testing requirements of the MFM system for the receiving...

ISO 21562 - Ships and marine technology — Bunker fuel mass flow meters on receiving vessel — Requirements
July 1, 2020 - ISO

This document specifies requirements for Coriolis mass flow meter (MFM) systems installed on and used by vessels for the accurate measurement of bunker fuels received. It defines metrology and security requirements as well as testing requirements of the MFM system for the receiving...

ISO 22192 - Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system
January 1, 2021 - ISO

This document specifies procedures and requirements for the transfer of bunkers to vessels by bunker tankers using the Coriolis mass flow meter (MFM) system. It encompasses the process leading to the approval of the MFM system as installed on bunker tankers and post-approval bunkering...

A-A-59928 - METER, FUEL FLOW, PORTABLE
November 4, 2019 - NPFC

The test set covered by this specification is intended to be a portable, fuel flow meter unit and eight test cables. The Fuel Flow Meter Test Set (here on referred to as test set or flow meter) is a support equipment test set which is used for depot and...

Unitary Analysis, Synthesis, and Classification of Flow Meters
November 16, 2017 - CRC

This book is the first to present flow measurement as an independent branch of the measurement techniques, according to a new global and unitary approach for the measurement of fluid flow field, starting from finding its unitary fundamental bases. Furthermore, it elaborates the method...

ASTM D6744-23 - Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
November 1, 2023 - ASTM International

5.1 This test method is designed to measure and compare thermal properties of materials under controlled conditions and their ability to maintain required thermal conductance levels.

ASTM C518-21 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
September 1, 2021 - ASTM International

1.1 This test method covers the measurement of steady state thermal transmission through flat slab specimens using a heat flow meter apparatus. 1.2 The heat flow meter apparatus is used widely because it is relatively simple in concept, rapid, and applicable to a wide...

AIR6202 - Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
June 14, 2017 - SAE International

The scope of this information report applies to the steady state measurement of direct mass fuel flow in gas turbine engine test cells. A measurement accuracy, and hence uncertainty of between ±0.1 to ±0.2% of value is believed to be achievable for liquid flow applications with some...

BS ISO 22192 - Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system
January 31, 2021 - BSI
A description is not available for this item.
ASTM F433-02(2026) - Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
June 1, 2026 - ASTM International

1.1 This practice covers a means of measuring the amount of heat transfer quantitatively through a material or system. 1.2 This practice is similar to the Heat Flow Meter System of Test Method C518, but modified to accommodate small test samples of higher thermal conductance. 1.3 The...

ASTM E3137/E3137M-26 - Standard Specification for Heat Meter Instrumentation
March 1, 2026 - ASTM International

This specification applies to heat meters used to measure heat in heat exchange circuits in which energy is absorbed (cooling) or given up (heating) by a flowing liquid. For this specification, the necessary elements of a heat meter consist of a sensor to measure flow of the...

API RP 17S - Recommended Practice for the Design, Testing, and Operation of Subsea Multiphase Flow Meters
June 1, 2015 - API

This document provides recommendations for the sizing, specification, system integration, and testing of subsea flow meters [henceforth referred to as multiphase flow meters (MPFMs)] for measurement of full stream, multiphase flow. This Recommended Practice (RP)...

Advertisement