loading
TEMA FLOW INDUCED - Flow Induced Vibration Analysis Software (FIV)
TEMA
A description is not available for this item.
AS 9100D FLOW CHARTS - AS9100 REV D FLOW CHARTS
9000STORE
A description is not available for this item.
AS9120 FLOW CHARTS - AS9120 REV B FLOW CHARTS
9000STORE
A description is not available for this item.
IATF 16949 FLOW CHARTS - 16949:2016 FLOW CHARTS: VISIO, SMARTDRAW
9000STORE
A description is not available for this item.
ASTM D1238-26 - Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
July 15, 2026 - ASTM International

5.1 This test method is particularly useful for quality control tests on thermoplastics. 5.2 The data produced by this test method serves to indicate the uniformity of the flow rate of the polymer as made by an individual process. It is not to be used as an indication of uniformity of other...

ISO 45001 FLOW CHARTS - ISO 45001:2018 FLOWCHARTS IN MS VISIO, SMARTDRAW, AND PDF
9000STORE
A description is not available for this item.
ASTM F91-06(2026) - Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
July 1, 2026 - ASTM International

This practice covers the testing of the integrity of high-efficiency particulate air (HEPA) filters installed in laminar flow clean rooms of the ceiling to floor or wall to wall type, and laminar flow clean work stations using condensation nuclei detector. The recommended practice may...

ASTM C1930-26 - Standard Test Method for Determination of Slurry Flow Rate of Fresh Glass Fiber Reinforced Concrete
June 1, 2026 - ASTM International

5.1 Slurry Flow Rates, determined by this test method, are useful for quality control of GFRC products to ensure that manufacturing equipment has been set up to deliver the correct proportions of concrete and glass fiber reinforcement for producing a GFRC composite. This test method is...

ASTM F1488-26a - Standard Specification for Coextruded Composite Pipe
August 1, 2026 - ASTM International

1.1 This specification covers coextruded composite pipe, intended for non-pressure gravity flow drain waste or vent (DWV) service, or plastic underdrain service, or electrical or comunications conduit service produced by a coextrusion die system, in which the concentric layers are formed and...

ASTM D2321-26 - Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
May 1, 2026 - ASTM International

4.1 This practice is for use by designers and specifiers, installation contractors, regulatory agencies, owners, and inspection organizations who are involved in the construction of sewers and other gravity-flow applications that utilize flexible thermoplastic pipe. As with any standard...

ASTM A788/A788M-26a - Standard Specification for Steel Forgings, General Requirements
August 1, 2026 - ASTM International

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM D7237-18(2026) - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
July 15, 2026 - ASTM International

5.1 Cyanide and hydrogen cyanide are highly toxic. Regulations have been established to require the monitoring of cyanide in industrial and domestic wastes and surface waters. 5.2 It is useful to determine the aquatic free cyanide to establish an index of toxicity when a wastewater is introduced...

ASTM E1354-26 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
August 1, 2026 - ASTM International

1.1 This fire-test-response standard provides for measuring the response of materials exposed to controlled levels of radiant heating with or without an external ignitor. 1.2 This test method is used to determine the ignitability, heat release rates, mass loss rates, effective heat of combustion,...

ASTM D2116-26 - Standard Specification for FEP Resin Molding and Extrusion Materials
July 1, 2026 - ASTM International

This specification covers melt-processible molding and extrusion materials of FEP-fluorocarbon resin, which is a copolymer of tetrafluoroethylene and hexafluoropropylene or a modified FEP-fluorocarbon resin containing not more than 2% by weight of other fluoromonomers. Four types of...

ASTM D3222-21(2026) - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
July 1, 2026 - ASTM International

This specification covers melt processable unmodified poly(vinylidene fluoride) (PVDF) molding, extrusion and coating materials. This specification covers only virgin homopolymer prepared from vinylidene fluoride supplied in form of pellet or powder and shall be free of foreign matter. Two types...

ASTM D3307-21(2026) - Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
July 1, 2026 - ASTM International

This specification covers melt processable molding and extrusion materials of PFA-perfluoro(alkoxy alkane) fluorocarbon resin. The materials are copolymers of TFE-fluorocarbon resins containing perfluoroalkoxy side chains. This specification is intended to provide a means for calling out plastic...

ASTM D445-26 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
July 1, 2026 - ASTM International

1.1 This test method specifies a procedure for the determination of the kinematic viscosity, ?, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic...

ASTM A1014/A1014M-26 - Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
July 1, 2026 - ASTM International

This specification covers a precipitation hardening bolting material (UNS N07718) for high temperature service. The alloy shall be multiple melted using consumable electrode practice in the remelt cycle or shall be induction melted under vacuum. Requirements for solution treatment, precipitation...

ASTM C1708/C1708M-26 - Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
June 1, 2026 - ASTM International

4.1 The test methods in this standard are used to evaluate freshly mixed properties such as the initial flow, flow retention, and healing time as well as hardened properties such as compressive strength, setting time, and flexural strength, of self-leveling mortars. 4.2 Tests are...

ASTM D1987-22(2026) - Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
June 1, 2026 - ASTM International

5.1 This test method is performance oriented for determining if, and to what degree, different liquids create biological activity on geotextile filters thereby reducing their flow capability. The use of the method is primarily oriented toward landfill leachates but can be performed with any...

Advertisement