loading
ASTM D7132-19(2026) - Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
July 1, 2026 - ASTM International

This test method covers the determination of retained blowing agent in extruded polystyrene foam. The internal standard preparation procedures of the material are presented in details. The procedures for determination of retained blowing agent in extruded polyester foam are presented...

ASTM D7119/D7119M-21(2026) - Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
May 1, 2026 - ASTM International

4.1 Adequate coating thickness (mil thickness) is necessary to protect polyurethane foam from the effects of ultraviolet degradation. This guide outlines general procedures for sampling and measuring the coating thickness by using slit or core samples. 4.2 Thickness of individual lifts of...

ASTM D7997-21(2026) - Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
July 1, 2026 - ASTM International

5.1 General Utility: 5.1.1 This practice is suitable for research, quality control, specification testing and process control. 5.1.2 It is useful to define and verify the reactivity of non-foam polyurethane formulations. 5.2 Limitations: 5.2.1 Operator-to-operator variability and lab-to-lab...

ASTM C1534-26 - Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
April 1, 2026 - ASTM International

1.1 This specification covers the composition, dimensions, and physical properties of flexible unfaced foam sheet, used to insulate interior surfaces of HVAC ducts, plenums and equipment used for the distribution of conditioned air with a temperature of up to 250°F (121°C). 1.2 HVAC ducts,...

ASTM D1622-26 - Standard Test Method for Apparent Density of Rigid Cellular Plastics
July 1, 2026 - ASTM International

5.1 If the material to be tested includes forming skins, the apparent overall density, or the apparent core density, or both, shall be determined. If the material does not have forming skins, the term overall density is not applicable. 5.2 This test method is also applicable to spray foam...

ASTM E2661/E2661M-26 - Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
July 1, 2026 - ASTM International

5.1 This AE examination is useful to detect micro-damage generation, accumulation, and growth of new or existing flaws. The examination is also used to detect significant existing damage from friction-based AE generated during loading or unloading of these regions. The damage mechanisms that can be...

ASTM F1303-26 - Standard Specification for Sheet Vinyl Floor Covering with Backing
June 1, 2026 - ASTM International

This specification covers resilient floor covering having a vinyl plastic wear layer with backing intended for use in commercial, light commercial, and residential building applications. Material covered by this specification consists of Types I and II floor covering, which may further be...

ASTM D5577-26 - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
May 15, 2026 - ASTM International

1.1 This guide is intended to provide information on available methods for the separation and classification of contaminants such as moisture, incompatible polymers, metals, adhesives, glass, paper, wood, chemicals, and original-product residues in recycled plastic flakes or pellets. Although no...

ASTM E3494-26 - Standard Test Method for Effectiveness of Antifoaming Agents for Agriculture Tank Mix
May 1, 2026 - ASTM International

5.1 This test method is designed to determine the ability of an antifoam to reduce or eliminate the formation of undesirable foam that can be generated during the mixing and application of agricultural chemicals in dilute aqueous mixtures. 5.2 This test method may be used to determine the...

ASTM D7859-26 - Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
April 1, 2026 - ASTM International

1.1 This practice describes standardized procedures for the preparation, spraying, packaging, and shipping of fresh spray polyurethane foam (SPF) insulation product samples to be tested for their emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs)....

ASTM D8637/D8637M-26 - Standard Test Method for Mode I Dominant Facesheet-to-Core Fracture Toughness of Sandwich Constructions
May 1, 2026 - ASTM International

1.1 This test method describes the determination of the Mode I dominant fracture toughness, GIc, associated with facesheet-to-core separation of sandwich constructions using the single cantilever beam (SCB) specimen. This separation can consist of a disbond of the facesheet-to-core interface or a...

ASTM F711-26 - Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools?
March 1, 2026 - ASTM International

This specification covers the technical characteristics of and test methods for insulating rods and foam-filled tubes made from fiberglass-reinforced plastic (FRP) that are intended for use in live line tools. This specification does not include insulating foam-filled tubes and rods...

ASTM D6464-03a(2026) - Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
January 1, 2026 - ASTM International

1.1 This specification establishes minimum performance requirements for determining strength, aging, and working properties of expandable foam adhesives intended for bonding back surfaces of gypsum wallboards of all thicknesses to wood framing. Minimum physical and performance requirements...

ASTM C1852-20(2025) - Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
November 1, 2025 - ASTM International

5.1 The intended use of this guide is to provide a high level summary of relevant test methods and performance criteria of aerosol foam sealants that can be helpful in identifying material properties and suitable applications. Use of this guide can be leveraged to further understand how...

ASTM G170-26 - Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
May 1, 2026 - ASTM International

5.1 Corrosion inhibitors continue to play a key role in controlling internal corrosion associated with oil and gas production and transportation. This results primarily from the industry's extensive use of carbon and low alloy steels, which, for many applications, are economic materials of...

ASTM C1536-19(2025) - Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
November 1, 2025 - ASTM International

5.1 The yield measurement of aerosol foam sealants is used to indicate the amount of foam sealant that can be obtained from a single container of product. 5.2 The yield does not predict the performance capability of the foam sealant product or its suitability for the intended...

ASTM D7155-20(2026) - Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
March 1, 2026 - ASTM International

5.1 The compatibility of oils can be important for users of oil-lubricated equipment. Mixing of two oils can produce a substance markedly inferior to either of its constituent materials. One or more of the following can occur: 5.1.1 A mixture of incompatible oils most often forms a precipitate. The...

ASTM C450-18(2026) - Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
March 1, 2026 - ASTM International

1.1 This practice provides tables of dimensions of preformed pipe insulation that shall be used in fabricating insulation covers for use on valves, ells, tees, flanges, and vessels in the pressure range from 150 to 1500 psi (1 to 10 MPa). These tables, which are part of this standard, are published...

ASTM C1620-25 - Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
October 1, 2025 - ASTM International

1.1 This specification covers the types, grades, and physical properties of aerosol polyurethane and aerosol latex foams extruded from pressurized containers and intended for building envelope air barrier sealant applications in building construction. 1.2 For specific aerosol foam...

ASTM C1959/C1959M-26 - Standard Test Method for Non-Contact Measurement of Resonant Frequencies of Concrete Cylinders
March 1, 2026 - ASTM International

5.1 While this test method serves a similar purpose as Test Method C215, attachment of a vibration sensor to the cylinder is not required, and requirements for preparing and supporting the specimen for testing are different. Smartphones or tablet computers can perform the required data acquisition,...

Advertisement