loading
ASTM F2232-26 - Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
July 15, 2026 - ASTM International

1.1 This test method covers the determination of the force required to detach the heel from footwear through the application of longitudinal tensile force at a constant displacement rate. The longitudinal test force simulates the most common heel failure mode. Heel height of 20 mm (13/16 in...

ASTM F2999-19(2026) - Standard Consumer Safety Specification for Adult Jewelry
April 1, 2026 - ASTM International

1.1 This specification establishes requirements and test methods for specified elements and for certain mechanical hazards in adult jewelry. It does not purport to cover every conceivable hazard of adult jewelry. It does not cover product performance or quality, except as related to safety. This...

ASTM F3032-26 - Standard Specification for Clothing for Protection Against Radiological Contamination
February 1, 2026 - ASTM International

1.1 This specification establishes minimum design, performance, labeling, and documentation criteria for protective ensembles, protective garments, protective gloves, protective footwear, and protective hoods for use at facilities with radioactive material contamination and certain...

ASTM F150-25 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
November 15, 2025 - ASTM International

4.1 Conductive and static dissipative floors (static control flooring) serve as a convenient means of electrically connecting persons and objects together to prevent the accumulation of electrostatic charges. A static control floor is specified on the basis of controlled resistance values. The...

ASTM F3751-25 - Standard Test Method for Measuring the Water Resistance of Footwear
April 15, 2025 - ASTM International

1.1 This test method is intended to assess the resistance to water penetration of completed footwear during flexing and static water exposure. 1.2 Units-The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to...

ASTM F3732-25 - Standard Performance Specification for Conductive Clothing for Industry Applications
October 1, 2025 - ASTM International

5.1 This performance specification identifies electrical, thermal, and mechanical performance characteristics for conductive clothing and its components. 5.1.1 The measured data provides information that the buyer can use when selecting conductive clothing used in Type 1 (for example, barehand...

ASTM F2965-25 - Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial Environments (Not Including Construction Work)
September 1, 2025 - ASTM International

1.1 This guide is intended to assist in the selection of walkway surfaces and treatments where the reasonably foreseeable presence of aggressive contaminants produces the risk of a fall event(s) in commercial and industrial environments (not including construction work), for persons wearing...

ASTM D430-06(2025) - Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
July 1, 2025 - ASTM International

4.1 Tests for dynamic fatigue are designed to simulate the continually repeated distortions received in service by many rubber articles, such as tires, belts, footwear, and molded goods. 4.1.1 These distortions may be produced by extension, compressive, and bending forces or combinations...

ASTM F2704-25 - Standard Specification for Air-Fed Protective Ensembles
June 1, 2025 - ASTM International

4.1 As with other hazardous materials protective ensembles, air-fed protective ensembles include clothing and equipment items needed for dermal and respiratory protection, including protective suits, gloves, footwear, and eye/face protection. Unlike other protective ensembles, air-fed...

ASTM F3032-25 - Standard Specification for Clothing for Protection Against Radiological Contamination
July 1, 2025 - ASTM International

1.1 This specification establishes minimum design, performance, labeling, and documentation criteria for protective ensembles, protective garments, protective gloves, protective footwear, and protective hoods for use at facilities with radioactive material contamination and certain...

ASTM E1549/E1549M-25 - Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
May 1, 2025 - ASTM International

This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers. The function of...

ASTM F2892-24 - Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
June 1, 2024 - ASTM International

1.1 The principal purpose of this specification is the certification of protective footwear. Certification must be performed by independent third party laboratories in order for footwear to bear the ASTM marking. 1.2 The specification contains performance requirements for...

ASTM F2413-24 - Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
June 1, 2024 - ASTM International

1.1 This specification covers minimum requirements for the performance of footwear to provide protection against a variety of workplace hazards that can potentially result in injury. 1.2 This specification is not intended to serve as a detailed manufacturing or purchasing specification, but...

ASTM F2913-24 - Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
June 15, 2024 - ASTM International

5.1 This non-proprietary laboratory test method allows for the reproducible testing of whole footwear and footwear-related soling materials for evaluating relative slip performance. Other ASTM test methods generally employ a standardized test foot primarily for evaluation of flooring...

ASTM F3445-24 - Standard Specification for Performance Requirements when Evaluating Slip Resistance of Footwear using ASTM F2913 Whole Shoe Tester
August 1, 2024 - ASTM International

1.1 This specification covers minimum slip resistance requirements for the performance of footwear and is intended to help reduce potential injuries. Controlled laboratory tests used to determine compliance with this performance specification shall not be deemed as establishing performance...

ASTM F2412-24 - Standard Test Methods for Foot Protection
June 1, 2024 - ASTM International

4.1 These test methods contain requirements to evaluate the performance of footwear for the following: 4.1.1 Impact resistance for the toe area of footwear (I), 4.1.2 Compression resistance for the toe area of footwear (C), 4.1.3 Metatarsal protection that reduces the chance of...

ASTM F1976-24 - Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials
June 1, 2024 - ASTM International

5.1 This test method is used by athletic footwear manufacturers and others, both as a tool for development of athletic shoe cushioning systems and as a test of the general cushioning characteristics of athletic footwear products, materials and components. Adherence to the requirements...

ASTM D8041/D8041M-16(2023) - Standard Test Method for Whole Boot Breathability (MVTR)
October 1, 2023 - ASTM International

4.1 The materials and construction methods used in the manufacture of footwear play a significant role in the "breathability" of the footwear. This test method provides a means to measure moisture vapor permeability, expressed as MVTR, which is one aspect of comfort of the...

ASTM G219-23 - Standard Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device
December 15, 2023 - ASTM International

5.1 Guide G115 lists a number of ASTM International standards that use the inclined plane test rig to measure the static coefficient of specific tribosystems. This guide applies to any material couple that can be made into test specimens; one being in the form of a rider and the other a plane that...

ASTM F1301-18(2024)e1 - Standard Practice for Labeling Chemical Protective Clothing
February 1, 2024 - ASTM International

1.1 This practice covers the informational content of labels in or on chemical protective clothing. This practice also addresses putting label content on chemical protective clothing packaging when it is not practical to attach the label directly to the chemical protective clothing or print it on...

Advertisement