loading
TH 42091 - CE MARKING FOR PRESSURE EQUIPMENT
THE
A description is not available for this item.
ASTM E328-26 - Standard Test Methods for Stress Relaxation for Materials and Structures
April 1, 2026 - ASTM International

Note 1: The method of testing for the stress relaxation of plastics has been withdrawn from this standard, and the responsibility has been transferred to Practice D2991. 1.1 These test methods cover the determination of the time dependence of stress (stress...

ASTM F2213-25 - Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
December 1, 2025 - ASTM International

1.1 This test method covers the measurement of the magnetically induced torque produced by the static magnetic field in the magnetic resonance environment on medical devices and the comparison of that torque to a user-specified acceptance criterion. 1.2 This test...

ASTM E3145-19(2024) - Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester)
November 1, 2024 - ASTM International

5.1 The user-level calibration process may be used to verify that the DF tester is functioning properly, that it is within manufacturer specifications, and to perform minor adjustments to bring the unit back into conformance with manufacturer specifications. 5.2 The DF...

ASTM F2373-24 - Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
December 15, 2024 - ASTM International

1.1 This consumer safety performance specification provides safety and performance requirements for various types of public use play equipment such as, but not limited to, composite play structures, climbing structures, to-fro swings, spring rocking equipment, and slides. It is intended to...

ASTM D2063/D2063M-24 - Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
May 1, 2024 - ASTM International

1.1 This is a quantitative method that measures removal torque of continuous thread closures on containers, with matching finishes for predetermined environmental conditions over time. The range of values that can be measured are limited to the equipment used. 1.2 The values...

ASTM D4648/D4648M-24a - Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Soil
October 15, 2024 - ASTM International

5.1 The miniature vane shear test may be used to obtain estimates of the undrained shear strength of fine-grained soils. The test provides a rapid determination of the undrained shear strength on undisturbed, or remolded or reconstituted soils. Note 2: Notwithstanding...

ASTM E3098-24 - Standard Test Method for Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
May 1, 2024 - ASTM International

1.1 This test method describes the thermal cycling of a Shape Memory Alloy (SMA) specimen through the phase transformation under minimal load transformation after uniaxial deformation. This method will measure residual strain after loading and unloading, recovered strain on heating,...

ASTM D5992-96(2024) - Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
May 1, 2024 - ASTM International

1.1 This guide covers dynamic testing of vulcanized rubber and rubber-like (both hereinafter termed "rubber" or "elastomeric") materials and products, leading from the definitions of terms used, through the basic mathematics and symbols, to the measurement of stiffness and...

ASTM E1318-09(2024) - Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
May 1, 2024 - ASTM International

1.1 Weigh-In-Motion-This specification describes Weigh-In-Motion (WIM), the process of measuring the dynamic tire forces of a moving vehicle and estimating the corresponding tire loads of the static vehicle. Gross vehicle weight of a highway vehicle is due only to...

ASTM E3097-23 - Standard Test Method for Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
June 15, 2023 - ASTM International

5.1 Constant force thermal cycling tests determine the effect of stress on the transformation temperatures, recovered strain and residual strain of a shape memory alloy. The tests may be for one thermal cycle. A standard test method for force controlled repeated...

ASTM D4648/D4648M-24 - Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated Fine-Grained Soil
January 15, 2024 - ASTM International

5.1 The miniature vane shear test may be used to obtain estimates of the undrained shear strength of fine-grained soils. The test provides a rapid determination of the undrained shear strength on undisturbed, or remolded or reconstituted soils. Note 2: Notwithstanding...

ASTM F1921/F1921M-12(2023) - Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
April 1, 2023 - ASTM International

5.1 In form-fill operations, sealed areas of packages are frequently subject to disruptive forces while still hot. If the hot seals have inadequate resistance to these forces, breakage can occur during the packaging process. These test methods measure hot seal strength and can be used...

DS/IEC 62912-2 - Railway applications – Direct current signalling monostable relays – Part 2: Spring type relays
August 19, 2019 - DS

IEC 62912-2:2019 gives requirements for direct current relays intended for safety-related applications in railway signalling installations. This document is applicable to non-proved signalling monostable relays of the spring type, whose return force is generated by elasticity...

IEC 62912-2 - Railway applications – Direct current signalling monostable relays – Part 2: Spring type relays
August 1, 2019 - IEC

This document gives requirements for direct current relays intended for safety-related applications in railway signalling installations. This document is applicable to non-proved signalling monostable relays of the spring type, whose return force is generated by elasticity of...

ASTM E328-21 - Standard Test Methods for Stress Relaxation for Materials and Structures
February 1, 2021 - ASTM International

Note 1: The method of testing for the stress relaxation of plastics has been withdrawn from this standard, and the responsibility has been transferred to Practice D2991. 1.1 These test methods cover the determination of the time dependence of stress (stress...

ASTM E328-20 - Standard Test Methods for Stress Relaxation for Materials and Structures
December 1, 2020 - ASTM International

Note 1: The method of testing for the stress relaxation of plastics has been withdrawn from this standard, and the responsibility has been transferred to Practice D2991. 1.1 These test methods cover the determination of the time dependence of stress (stress...

ISO DIS 2100-413 - Aerospace elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system
August 3, 2017 - ISO

This standard specifies a method of assessing the holding force of the grounding spring system used in elements of connection. It shall be used together with ISO 2100-100.

ICBO LATERAL FORCE - RECOMMENDED LATERAL FORCE REQUIREMENTS AND COMMENTARY (SEAOC BLUE BOOK)
October 1, 1999 - ICBO
A description is not available for this item.
Force limited random vibration testing The computation of the semi-empirical constant C2 for test article and supporting structure
April 1, 2020 - ESDU

INTRODUCTION General During the early phase of the launch (lift-off) a spacecraft will be exposed to severe random acoustic loads. Acoustic loads are the cause of structure-borne random mechanical vibrations inside the spacecraft. Before launch the spacecraft...

Advertisement