loading
ASTM E155-20(2026) - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate the types and degrees of discontinuities that may be found in aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4 in. (6.35 mm) and 3/4 in. (19.1 mm). The reference radiograph films are an adjunct to this...

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

4.1 Laser profiling assessment is a quality control tool for identifying and quantifying deformation, physical damage, and other pipe anomalies after installation, providing means and methods for determining the quality of workmanship and compliance with project specifications. Laser profiling can...

ASTM F3095-17a(2026) - Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
June 1, 2026 - ASTM International

4.1 Laser profiling assessment is a quality control tool for identifying and quantifying deformation, physical damage, and other pipe anomalies after installation, providing means and methods for determining the quality of workmanship and compliance with project specifications. Laser profiling...

ASTM C430-26 - Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
June 1, 2026 - ASTM International

This test method covers hydraulic cement fineness tests performed using a sieve. The sieve frame should be made of a circular metal matching the specified dimensions, fitted with either a stainless steel woven-wire sieve cloth or an electroformed forced nickel sieve sheet. Both the nozzle...

ASTM C844-26 - Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
May 1, 2026 - ASTM International

1.1 This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters. 1.2 Gypsum veneer base shall not be used as a base for direct adhesive application of ceramic, metal, or plastic tile in areas exposed to abnormal moisture or...

ASTM D6110-26 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
July 1, 2026 - ASTM International

5.1 Before proceeding with this test method, refer to the material specification for the material being tested. Any test specimen preparation, conditioning, dimensions and testing parameters required by the materials specification shall take precedence over those required by this test method. Table...

ASTM F3359/F3359M-21(2026) - Standard Test Method for Determining Bending Yield Moment of Staples
May 1, 2026 - ASTM International

5.1 Staples are mechanical fasteners used in wood structures. Engineering design procedures used to determine the capacities of laterally-loaded staple connections use a yield theory to establish nominal resistance (Note 2). In order to develop nominal resistance for laterally-loaded stapled...

ASTM C901-26 - Standard Guide for Design and Installation of Prefabricated Masonry Elements
June 1, 2026 - ASTM International

1.1 This guide provides information regarding masonry elements constructed at locations other than in-place. Prefabrication may occur on the jobsite or offsite and transported to the jobsite. This guide covers lintels, arches, sloped sills, spandrels, soffits, wall panels, and other masonry...

ASTM F1909-98(2026) - Standard Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets
June 1, 2026 - ASTM International

This specification covers preformed open-cell sponge rubber gaskets, for use in new or reconditioned pails or drums, of the following classes: Class A and Class B, each divided into Grade 1, Grade 2, and Grade 3. Cellular sponge rubber gaskets shall be made by incorporating a blowing agent into the...

ASTM F3306-26 - Standard Test Method for Ion Release Evaluation of Medical Implants
June 1, 2026 - ASTM International

1.1 This test method assesses metal or other ions released from single-use, metallic, implantable medical devices or components thereof by exposing the device to solutions simulating the in vivo environment and temperature in a container for a predetermined time frame with regular sampling...

ASTM D6513-26 - Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
April 1, 2026 - ASTM International

1.1 This practice covers procedures for calculating the superimposed axial load required to be applied to load-bearing wood-frame walls throughout standard fire-resistance and fire and hose-stream tests. 1.2 The calculations determine the maximum load allowed by design for wood-frame...

ASTM E3325-21(2026) - Standard Practice for Sampling of Solar Photovoltaic Modules for Toxicity Testing
June 1, 2026 - ASTM International

1.1 The purpose of this practice is to describe a representative and repeatable sample preparation methodology to conduct toxicity testing on solar photovoltaic (PV) modules for use with EPA Test Method 1311: Toxicity Characteristic Leaching Procedure (TCLP). 1.2 This practice refers to the...

ASTM D6464-03a(2026) - Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
January 1, 2026 - ASTM International

1.1 This specification establishes minimum performance requirements for determining strength, aging, and working properties of expandable foam adhesives intended for bonding back surfaces of gypsum wallboards of all thicknesses to wood framing. Minimum physical and performance requirements...

ASTM D7989-26 - Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
April 1, 2026 - ASTM International

1.1 This practice establishes a method for alternative shear wall systems to compare seismic equivalency parameters (SEP) derived from cyclic in-plane racking tests to performance targets derived from tests of light-frame shear walls constructed with wood structural panel (WSP) sheathing...

ASTM F2317/F2317M-26 - Standard Specification for Design of Weight-Shift-Control Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers the minimum airworthiness standards a manufacturer shall meet in the designing, testing, and labeling of weight-shift-control aircraft. 1.2 This specification covers only weight-shift-control aircraft in which flight control systems do not use hinged surfaces...

ASTM C557-03(2026) - Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
January 1, 2026 - ASTM International

This specification covers the minimum performance standards for and properties of adhesives intended to bond the back surface paper of gypsum wallboard to wood framing members. Test requirements and test methods for the adhesive used for the application of all thicknesses of gypsum wallboard...

ASTM A1003/A1003M-25 - Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
December 1, 2025 - ASTM International

1.1 This specification covers coated steel sheet used in the manufacture of cold-formed framing members, such as, but not limited to, studs, joists, purlins, girts, and track. 1.2 The steel sheet used for cold-formed framing members includes metallic-coated, painted metallic-coated,...

ASTM E1555-20(2026) - Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
April 1, 2026 - ASTM International

1.1 This specification defines those characteristics that are required of adhesives to be used in the repair of sandwich panels for durable, rigidwall, relocatable structures. 1.1.1 This specification covers two-part epoxy adhesive suitable for bonding aluminum alloy facings to nonmetallic core,...

ASTM E2969-18(2026) - Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction
April 1, 2026 - ASTM International

1.1 These test methods cover transverse load testing to determine the structural properties of wall segments. 1.2 These test methods serve to evaluate the performance of wall panels subject to transverse bending loads applied perpendicular to the plane of the wall. The tests are conducted on...

ASTM C1242-26 - Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
April 1, 2026 - ASTM International

4.1 This guide is intended to be used by architects, engineers, and contractors who either design or install exterior stone cladding for architectural structures. 4.2 This guide is an industry standard for engineering design considerations, documentation, material considerations, anchor type...

Advertisement