1.1 This performance specification covers performance requirements for vinyl-coated and urethane-coated upholstery fabrics produced with woven, knit, or nonwoven substrates which are used in the manufacture of new indoor furniture. 1.2 This performance specification is not applicable...
5.1 According to statistics provided by the NFPA, one of the most common initiating events in a fatal fire is the dropping of a smoking material, such as a pre-roll, onto a bed or a piece of upholstered furniture. Test Methods E1352 and E1353 and NFPA 261 and NFPA 260 have been developed to...
1.1 This fire-test-response test method is designed for use to determine various fire-test-response characteristics, including ignitability and heat release rate, from composites of mattresses or furniture, or correctional facilities, which have been vandalized in a prescribed manner to...
5.1 Test Method D4034 for measuring the resistance to fabric yarn slippage is considered satisfactory for acceptance testing of woven upholstery fabrics. 5.1.1 In case of disagreement arising from differences in values reported by the purchaser and the supplier when using this test...
1.1 This test method determines the ability of a terry fabric to rapidly absorb and retain liquid water from surfaces such as human skin, dishes, and furniture. 1.2 This test method is not applicable to non-terry fabrics such as huck towels, waffle-weave towels, crash towels,...
1.1 This standard is a compilation of all terminology developed by Subcommittee D13.62 on Labeling and related to refurbishing or care of floor coverings and textile upholstered furniture, excluding leather. These items cannot be refurbished by the laundering and dry cleaning methods used...
5.1 The measured dimensional stability of a fabric determines whether a fabric has the potential to retain its original shape and remain stable, indicating it will not bubble or sag over time, when applied over a substrate, and its suitability for a specified use. 5.2 This test method...
1.1 This practice is to be used to evaluate specific characteristics of importance in the performance of upholstery fabric attached to a furniture unit, including woven, knitted, tufted, flocked, or vinyl fabrics. 1.2 It is understood that the fabric used to construct...
1.1 This practice is to be used to evaluate specific characteristics of importance in the performance of upholstery fabric attached to a furniture unit, including woven, knitted, tufted, flocked, or vinyl fabrics. 1.2 It is understood that the fabric used to construct...
1.1 This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture. These requirements apply to both the warp and filling directions for those factors where each fabric...
1.1 This standard is a compilation of all terminology developed by Subcommittee D13.62 on Labeling and related to refurbishing or care of floor coverings and textile upholstered furniture, excluding leather. These items cannot be refurbished by the laundering and dry cleaning methods used...
1.1 This performance specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirements apply to both the wale and course directions for those factors where each fabric...
This performance specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirements apply to both the wale and course directions for those factors where each fabric...
1.1 This specification2 relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a toy is intended or after reasonably foreseeable abuse. It does not purport to cover every conceivable hazard of a particular toy. This...
1.1 This fire-test-response test method is designed for use to determine various fire-test-response characteristics, including ignitability and heat release rate, from composites of mattresses or furniture, or correctional facilities, which have been vandalized in a prescribed manner to...
1.1 This test method covers the measurement of compression resistance and recovery properties of any type of highloft nonwoven fabric using a simplistic and economical applied static weight loading technique. 1.2 This standard does not purport to address all of the safety concerns, if any,...
5.1 These test methods are intended to estimate the performance of upholstered furniture under conditions of exposure to a smoldering cigarette. This is accomplished by testing furniture component assemblies. However, interactions between components in production furniture are...
5.1 According to statistics provided by the NFPA, one of the most common initiating events in a fatal fire is the dropping of a smoking material, such as a pre-roll, onto a bed or a piece of upholstered furniture. Test Methods E1352 and E1353 and NFPA 261 and NFPA 260 have been developed to...
This performance specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirements apply to both the wale and course directions for those factors where each fabric...
This performance specification covers performance requirements for vinyl-coated and urethane-coated upholstery fabrics produced with woven, knit, or nonwoven substrates which are used in the manufacture of new indoor furniture. This performance specification is not applicable to...
Narrow Your Results