loading
ASTM F2388-21(2026) - Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
July 1, 2026 - ASTM International

This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing surfaces such as contoured changing pads and add-on changing units that are sold separately for use on furniture...

ASTM D8342/D8342M-21(2026) - Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll
April 15, 2026 - ASTM International

5.1 According to statistics provided by the NFPA, one of the most common initiating events in a fatal fire is the dropping of a smoking material, such as a pre-roll, onto a bed or a piece of upholstered furniture. Test Methods E1352 and E1353 and NFPA 261 and NFPA 260 have been developed to...

ASTM F1550-26 - Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
January 1, 2026 - ASTM International

1.1 This fire-test-response test method is designed for use to determine various fire-test-response characteristics, including ignitability and heat release rate, from composites of mattresses or furniture, or correctional facilities, which have been vandalized in a prescribed manner to...

ASTM D6736-26 - Standard Test Method for Burnish Resistance of Latex Paints
January 1, 2026 - ASTM International

5.1 Interior flat paints may become burnished in areas where clothing or upholstered furniture rub against a wall. This rubbing may cause a smoother, glossier surface at the contacted area, depending on the level or type of pigments in the paint and binder hardness. By using an automated...

ASTM E2619/E2619M-26 - Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
January 1, 2026 - ASTM International

4.1 Use this practice to identify and measure the amount of actual and effective floor area that will be unavailable to occupants for the placement of people's workplaces, furniture, and equipment or for circulation. 4.2 Findings from use of this practice are intended for optional inclusion...

ASTM D4034/D4034M-26 - Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics
January 1, 2026 - ASTM International

5.1 Test Method D4034 for measuring the resistance to fabric yarn slippage is considered satisfactory for acceptance testing of woven upholstery fabrics. 5.1.1 In case of disagreement arising from differences in values reported by the purchaser and the supplier when using this test method for...

ASTM E2280-25a - Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
August 15, 2025 - ASTM International

4.1 This guide is intended for use by those undertaking the development of fire hazard assessments for upholstered seating furniture in health care occupancies. 4.2 As a guide this document provides information on an approach to development of a fire hazard assessment, but fixed procedures...

ASTM D5253-25 - Standard Terminology Relating to Refurbishing or Care of Floor Coverings and Textile Upholstered Furniture
August 1, 2025 - ASTM International

1.1 This standard is a compilation of all terminology developed by Subcommittee D13.62 on Labeling and related to refurbishing or care of floor coverings and textile upholstered furniture, excluding leather. These items cannot be refurbished by the laundering and dry cleaning methods used...

ASTM D4772-26 - Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
January 1, 2026 - ASTM International

1.1 This test method determines the ability of a terry fabric to rapidly absorb and retain liquid water from surfaces such as human skin, dishes, and furniture. 1.2 This test method is not applicable to non-terry fabrics such as huck towels, waffle-weave towels, crash towels, flour-sack...

ASTM F1870-26 - Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
January 1, 2026 - ASTM International

1.1 This is a fire-test-response guide. 1.2 This guide is intended to provide guidance for the selection of test methods that are applicable to determining fire-test-response characteristics of upholstered furniture items contained within a detention cell. 1.3 This guide is intended for use...

ASTM D3690-25 - Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics—Indoor
November 1, 2025 - ASTM International

1.1 This performance specification covers performance requirements for vinyl-coated and urethane-coated upholstery fabrics produced with woven, knit, or nonwoven substrates which are used in the manufacture of new indoor furniture. 1.2 This performance specification is not applicable to...

ASTM E1822-21(2025) - Standard Test Method for Fire Testing of Stacked Chairs
December 1, 2025 - ASTM International

5.1 This test method provides a means of measuring a variety of fire-test-response characteristics resulting from burning a stack of five stacking chairs. After ignition using a propane gas burner, the test specimen is permitted to burn freely under well-ventilated conditions. The most important...

ASTM D3136-25 - Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
November 1, 2025 - ASTM International

1.1 This standard is a compilation of terminology developed by Subcommittee D13.62 on Labeling that is related to refurbishing and labeling for apparel, textile, home furnishing, and leather products other than upholstered furniture and floor coverings. 1.2 This terminology provides a...

ASTM D6207-03(2025)e1 - Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
November 1, 2025 - ASTM International

1.1 This test method covers the determination of the dimensional stability of fabrics that are intended for use on panel and screen systems to cycled changes in humidity and temperature. 1.1.1 Panel and screen systems include acoustic panels, free standing screens, office partitions, and...

ASTM E2280-25 - Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
June 1, 2025 - ASTM International

4.1 This guide is intended for use by those undertaking the development of fire hazard assessments for upholstered seating furniture in health care occupancies. 4.2 As a guide this document provides information on an approach to development of a fire hazard assessment, but fixed procedures...

ASTM F1838-19(2025) - Standard Performance Requirements for Adult and Children's Plastic Chairs for Outdoor Use
August 1, 2025 - ASTM International

1.1 These standard performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) adult and children's plastic chairs intended for outdoor use. 1.2 These requirements do not address conditions that affect the performance of...

ASTM D3751/D3751M-10(2024) - Standard Practice for Evaluation of Furniture Polish
November 1, 2024 - ASTM International

3.1 This practice defines the properties to be tested, the apparatus to be used, and the comparisons of product performance. It is recognized that considerable discretion exists among formulators and marketers of furniture polish on which properties or performance characteristics are best...

ASTM F3727-24 - Standard Test Method for Fire Testing of Vandalized Upholstered Furniture
October 1, 2024 - ASTM International

5.1 This test method provides a means to measure a variety of fire-test-response characteristics resulting from burning a specimen of upholstered furniture, both as manufactured and after vandalization to expose the padding. The upholstered furniture specimen (see Section 6) is...

ASTM F782-19(2024) - Standard Specification for Doors, Furniture, Marine
May 1, 2024 - ASTM International

1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. 1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. 1.3 The values stated in...

ASTM D4852-24 - Standard Practice for Evaluation of Attached Upholstery Fabrics
November 1, 2024 - ASTM International

4.1 This practice may be used to evaluate pertinent performance characteristics of attached upholstery fabrics. 4.2 Loose cushions or pillows considered an inherent part of the total upholstered furniture unit are to be evaluated using this practice. 4.3 This practice is not intended for use...

Advertisement